Lyman 48C parts diagram

[barkerwc4362]

Does anyone have a parts diagram or schematic of the Lyman 48C sight that was mounted on the M1922 series rifles? The sight on a friend's M1922 MI has no clicks on the elevation slide. Figured out the spring and detent ball are missing, but not sure what else.

Bill

[relics6165]

barkerwc4362:

While it's not really a parts diagram, there is a breakdown of the Lyman 48C rear sight in Brophy.

HTH

[barkerwc4362]

I saw the info on pages 473 - 475. I was hoping someone had a Lyman parts breakdown so we could figure out what parts are missing from the sight. Thanks.

Bill

[zertouche]

Its not a very complicated device. What exactly is your question?

[barkerwc4362]

A friend's 48C is missing some parts on the elevation slide. The slide can be moved down by turning the screw, but does not move when the screw is moved upward. There are also no clicks when the elevation screw is turned in either direction. Apparently someone took it apart in the past and lost some of the internal parts on the elevation part of the slide. If I had a exploded view or parts diagram I could identify which parts are missing.

Bill

[n64atlas]

This a diagram of a 48WH used on the Winchester model 70 National Match. It should be the basic design:
http://img.photobucket.com/albums/0603/n64atlas/DSC_0699.jpg

[barkerwc4362]

Thanks, I hope that with this we can figure out what is missing.

Bill