+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15

Thread: Import Marked WWII Garand

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Sgt Rock's Avatar
    Join Date
    Mar 2009
    Last On
    11-30-2010 @ 06:39 PM
    Location
    SE PA
    Posts
    52
    Local Date
    04-19-2024
    Local Time
    06:47 AM

    Import Marked WWII Garand

    I have a bit of a dilemma and I need some advice and opinions. I have come across an interesting Garandicon and I am in a quandary as to what to do. I bought what was supposed to be a substantially correct and unmolested March of 45 Garand with all original parts and some good honest wear – along with a pretty nice SA/NFR stock. Came out of a WWI vets estate, family has no interest, blah, blah, blah. Buy the rifle, not the story, 3-day inspection period allows me the flexibility to be sure I am getting what I expect. Paid what you would expect to pay for a nice WWII era rifle. Rifle arrived and it was filthy and my biggest concern was the bore. This rifle had been shot, and carbon fouling was everywhere. TE=3, and a patch through the barrel revealed a pretty nice looking bore…it also uncovered a teeny tiny ARL ORD import mark on the barrel by the muzzle. One of those very early, very small, nicely done markings…uh-oh! Seller avows no knowledge, and based on conversations prior to making the deal I tend to believe him. He agrees that value of rifle is impacted by presence of markings, now we need to decide by how much. To me, this is a rifle that was imported in its original WWII configuration and would make a nice addition to a collection. I just don’t want to have to make apologies in the form of dollar bills somewhere down the road due to the presence of the import markings.

    How much, in the form of yankee dollars, do the markings affect the value? $100, $200? $300? $500, more?

    Thoughts, suggestions, comments??
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    Mike Haas's Avatar
    Join Date
    Mar 2009
    Last On
    04-23-2019 @ 05:54 PM
    Posts
    509
    Local Date
    04-19-2024
    Local Time
    07:47 AM
    Quote Originally Posted by Sgt Rock View Post
    I have a bit of a dilemma and I need some advice and opinions. I have come across an interesting Garandicon and I am in a quandary as to what to do. I bought what was supposed to be a substantially correct and unmolested March of 45 Garand with all original parts and some good honest wear – along with a pretty nice SA/NFR stock. Came out of a WWI vets estate, family has no interest, blah, blah, blah. Buy the rifle, not the story, 3-day inspection period allows me the flexibility to be sure I am getting what I expect. Paid what you would expect to pay for a nice WWII era rifle. Rifle arrived and it was filthy and my biggest concern was the bore. This rifle had been shot, and carbon fouling was everywhere. TE=3, and a patch through the barrel revealed a pretty nice looking bore…it also uncovered a teeny tiny ARL ORD import mark on the barrel by the muzzle. One of those very early, very small, nicely done markings…uh-oh! Seller avows no knowledge, and based on conversations prior to making the deal I tend to believe him. He agrees that value of rifle is impacted by presence of markings, now we need to decide by how much. To me, this is a rifle that was imported in its original WWII configuration and would make a nice addition to a collection. I just don’t want to have to make apologies in the form of dollar bills somewhere down the road due to the presence of the import markings.

    How much, in the form of yankee dollars, do the markings affect the value? $100, $200? $300? $500, more?

    Thoughts, suggestions, comments??
    Sgt Rock -Depends on what you actually paid for the rifle...if it was $500.00 I wouldn't sweat it. $1000.00 ??...well without pictures..I'd suggest about $300.00 deduction ..depending on other factors..Springfield or Winchester? Overall general condition ete.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    al in oregon's Avatar
    Join Date
    Mar 2009
    Last On
    11-17-2015 @ 02:23 PM
    Location
    oregon and az
    Age
    85
    Posts
    19
    Local Date
    04-19-2024
    Local Time
    04:47 AM
    I had this dilemma a few years ago. I was interested in an all correct gap letter. It was import marked on the barrel--nothing obtrusive but it was import marked. I discussed this with leemazoid and he said 'What the heck. It is still an all correct gap letter. So it has an import mark on it." Given that advice, I bought the rifle and I haven't regretted it since. I think I paid $985 for it about 2 or 3 years ago. I wouldn't think value would be affected more than $100 or $200 at the most in my case. HTH Al

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    dbarn's Avatar
    Join Date
    Mar 2009
    Last On
    04-05-2017 @ 10:46 PM
    Posts
    412
    Local Date
    04-19-2024
    Local Time
    06:47 AM
    It is so rare to find one with most all of it's original parts, particularly in the case of the WWII Garandicon. Personally, if all of the parts appear to be original and closely matching in wear patterns and condition, maybe $250-$300. Condition and originality would trump the import mark IMHO.

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    Mike Haas's Avatar
    Join Date
    Mar 2009
    Last On
    04-23-2019 @ 05:54 PM
    Posts
    509
    Local Date
    04-19-2024
    Local Time
    07:47 AM
    Sgt Rock - I replied to your PM... "dbarn" and I think alike!!

    Now!!...Post some pictures!!!

  8. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    AL in MN's Avatar
    Join Date
    Mar 2009
    Last On
    02-04-2014 @ 06:05 PM
    Location
    suburban St. Paul, MN
    Posts
    32
    Local Date
    04-19-2024
    Local Time
    05:47 AM
    My opinion is $200 less for the import mark if it is unobtrusive.

  9. #7
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    04-17-2024 @ 05:05 PM
    Location
    Edgefield, SC USA
    Posts
    4,045
    Local Date
    04-19-2024
    Local Time
    07:47 AM
    I have a rifle that's just like yours except it a 3371xxx with correct SA/GAW stock and all original-correct parts. The lock bar staked on the rear sight has never been broken. Obviously some of the rifles imported in the 80's from Korea and elsewhere were unalterd originals in grungy but nice condition when cleaned up. My attitude is that the import mark is just another day in the history of the rifle unless horribly done and obtrusive. I know some think that it detracts from value but I don't really understand why as unaltered, original rifles are so difficult to find at all. I'd much rather have this rifle with it's import mark than one that has been restored by a collector/enthusiast. Just my 2 cents so take it for what it's worth.

  10. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    dinki dow's Avatar
    Join Date
    Aug 2009
    Last On
    01-29-2015 @ 04:02 PM
    Location
    TX
    Posts
    19
    Local Date
    04-19-2024
    Local Time
    05:47 AM

    Import Marks

    I wouldn't be lead down the primrose path thinking that an import rifle would be correct as a lot of imports were put together from rifles that were to beat up to sell. Blue Sky is one of them. I read that the stamp was so heavy on a carbine barrel that when it was fired it blew the barrel. I believe it was in the CMPicon forum where I read it.

    A politician would rather climb a tree to tell a lie, than stand on the ground and tell the truth

  11. #9
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    04-17-2024 @ 05:05 PM
    Location
    Edgefield, SC USA
    Posts
    4,045
    Local Date
    04-19-2024
    Local Time
    07:47 AM
    Well, I understand your point but I've been collecting for 30 years and in the trade for the last 20. I know a rifle that hasn't been screwed with be it an M1Rifle or No.4T Lee Enfield sniper. Call it a gut feeling if you will but I've been using it forever and have never been burnt seriously. The rifle I have just smells right if you know what I mean. The finish on all of the parts have the same wear patterns and patina and I really do believe that this particular rifle has been together since day one. I also know the guy I purchased it from. It was before all the massive increases in value and he isn't in the trade nor would he have any reason to put one over on anyone let alone me. He actually wanted it back a few years ago but I decided to keep it. I have a few other M1icon rifles I've restored, (back when it was affordable), that are now correct but aren't as honest for obvious reasons and I think I'd part with them before I'd part with this one. I have 20 M1 service rifles and four legit snipers in my Garand collection so I know just a little bit about them. ATB.

  12. #10
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:16 PM
    Location
    Victoria BC
    Posts
    29,904
    Real Name
    Jim
    Local Date
    04-19-2024
    Local Time
    04:47 AM
    I'm with Brian, I have only two M1s at this time. One old banger and a early SA, 328219 with English proofs under the op rod handle. It's all correct down to the round firing pin. No matter what some say, the members of this forum would love to be able to absorb it into their masses and that would happen unquestionably. I don't think there would be quibbling by most about import marks. By the sounds of it you want this rifle for you, not resale. Hang on for a few years and it will increase in value in spite of it's self.

  13. Thank You to browningautorifle For This Useful Post:


+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Two WWII Kriegsmarine marked pistols…each with its own story.
    By drm2m in forum Other Military Service Pistols and Revolvers
    Replies: 8
    Last Post: 03-15-2011, 06:55 AM
  2. Century Import Garand ?'s
    By coneten in forum M1 Garand/M14/M1A Rifles
    Replies: 3
    Last Post: 08-28-2009, 07:21 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts