PDA

View Full Version : Colt M1917


Danj03
03-03-2009, 12:18 AM
Which forum is best to find a value?
Thanks

chuckindenver
03-03-2009, 09:24 AM
what do you meen by that, the CSP pages have some of the best info, on the 1911 variants in the world, awesome tech, history, and pictures.
as for buying a pistol, these arent set for that, only discussion

Iceman66
03-03-2009, 04:03 PM
I'm not sure what the question is??? If you would like a value of a gun you have or are considering, post some decent pictures and folks here will try to give you some ballpark figures. If you are asking where to go to buy one, then this is not really the place. Try any of the gun auction sites. If you don't know much about the M1917, just ask and you will receive lots of info and reference source information.

Danj03
03-03-2009, 05:48 PM
This forum is 1911/1911A, I did not know if there was a better forum for M1917's questions or not. Also are these safe to shoot?
Thanks
http://i240.photobucket.com/albums/ff167/danj03/P1020528.jpg
http://i240.photobucket.com/albums/ff167/danj03/P1020520.jpg
http://i240.photobucket.com/albums/ff167/danj03/P1020522.jpg
http://i240.photobucket.com/albums/ff167/danj03/P1020524.jpg
http://i240.photobucket.com/albums/ff167/danj03/P1020521.jpg
http://i240.photobucket.com/albums/ff167/danj03/P1020523.jpg

chuckindenver
03-03-2009, 09:02 PM
1911 A1 and service pistol, you in the right place, darn nice shooter you have.
only problem. its not laying next to my gals in the safe.
and yes, very safe to shoot, and a lot of fun. however, that old gal would do better looking good, and not shot that much anymore. a little oil, and when you handle it it use cotton gloves, the salts and acid on your hands will remove the nice original finish.
invest in a nice soft treated pistol case, best 20.00 you can spend, that will protect the value. and it will always look that nice. thanks for sharing.

Danj03
03-03-2009, 10:01 PM
Any guess as to value?

Thanks

stonewall56
03-04-2009, 12:11 AM
Nice pistol. I also have a Colt. Value could be $350-$750 or more depending on the bore, if timing & lock up are tight and if it is the original finish. I fire mine once in a while. Your shells need to be in half moon or full moon clips in order for it to eject properly. Supposedly, you can load & fire the Colts (not S & W) without moon clips then eject them by hand with a pencil. Original holsters are expensive (at least in Pugetropolis), reproductions are available at "What Price Glory" for about $40.00. He also has the lanyards. If you're looking to sell you could post it on Gun Broker with a starting price of the minimum you would take. You don't have to have an FFL to sell there, just be sure to read the rules & laws. By the way, this would be a C & R or curio & relic. C & R licenses are handy to have. They allow you to receive C & R firearms from out of state without an FFL (if your state allows it).

Coltgrabber
03-04-2009, 09:31 AM
These pistols are getting harder to find in 97% or better condition. The ones I have seen (primarily at Tulsa) are getting pricey! ($900-up)

A square 10
03-05-2009, 02:46 PM
stonewall - i like your large type , how'd you get that ?

first every old weapon should be checked by a competent gunsmith prior to shooting , now that ive CMA , the model 1917 is a robust revolver and if it checks out good should shoot well and reliably , i shoot my S&W M1917 regularly ,

the S&Ws later colts had a shoulder cut in the cylinders to allow shooting without the moon clips , but the early colts didnt have this and you will have to use the moon clips ,

nice revolver

stonewall56
03-05-2009, 03:42 PM
To A Square 10:

If you do a quick reply click the go advanced button. That will show the fonts, sizes and other options at the top. If you go to the top and click post reply it automatically gives it to you.

Glad to see everyone here. I'll post a photo of my M1917 Colt soon.




2845

A square 10
03-06-2009, 05:15 PM
ill give it a go and add my S&W M1917 for fun


http://i144.photobucket.com/albums/r188/Asquare10/mikesrifles015.jpg

A square 10
03-06-2009, 05:16 PM
trying again - photo worked but the bold didnt......................:>{

stonewall56
03-06-2009, 11:22 PM
Those are some nice looking pistolas! Here's mine, although the M1911 is a Colt reproduction.

2909

Jughead
03-19-2009, 07:08 AM
I have three Colt 1917's. One is 99%, 95%, and 85%. I shoot the 85% fairly regularly and it shoots great.http://i245.photobucket.com/albums/gg59/grillagracy/DSC03025.jpg

userids
12-17-2009, 04:57 AM
nice colts :)