Quote:
“The purpose of this procedure is to destroy the receiver or frame in a manner that will prevent its function and future use as a firearm. A proper method of destroying this firearm is to cut the receiver into separate pieces as follows. All cutting must be done with a cutting torch having a tip of sufficient size to displace at least ¼ inch of material at each location.
• Each cut must completely sever the receiver in the area indicated by the diagonal lines.
• The receiver must be completely severed in each area indicated with a diagonal torch cut.
• Cutting by means of a band saw or cut-off wheel does not ensure destruction.
•
Note: Alternate methods of destruction defining the proposed procedure must be submitted in writing to the ATF Firearms Technology Branch for review and approval prior to implementation.”