I've got a partial Brindles set here, which turned up a while back.
Printable View
I've got a partial Brindles set here, which turned up a while back.
Another unknown?
Spanner adjustable I see! :D
The sight base depicted is part of Samuel Peacock's 1906 patent 7994, the sight ladder attached is a target specific one as opposed to the original Military one that was marked to 1700 yards.
Attachment 128664
From 1905 until 1908, there were several innovative sight adjusters patented,the Reardon sight which is very similar to the one depicted is a variation and may well be the sight family in question.
Attachment 128665
I have seen the sight you depict, but for the love of me cannot locate it in my files.
Heres another Rare unmarked sight, grabbed this as soon as I saw it (thanks Markymark) took awhile to get it but well worth the wait.
Seized and dirty, but not a problem, half a day had it stripped and cleaned and working again.
Attachment 129033Attachment 129034Attachment 129035
Now I am unsure of the make, but several design features point me to one specific bloke, along with the fact that I had seen this type sight at a small museum in Charters Towers adds to my pointing towards Harry Motton as the bloke.(willing to be proved wrong though)
The windarm is the first give away, this type was used until 1912 on his unmarked small folder, along with the external spring to locate the arm, used all the way along with the halfnut elevation system until after the EDMOTT, when he finally made a captive nut sight.
This sight has the halfnut with lever release, same windarm as later models, same type windarm lock, but the elevation arm is a similar style to the early hockeystick style used by Westly Richards(Motton took an example of his sight to England in 1907 where he toured both Westely Richards and BSA plants,he later became the distributor for both their sights)
Attachment 129038
Heres three early styles together, each having a similarity, but different in it's own right, the other extended leg sight is different as in the windarm swings into it's locked position and is secured by a thumbnut instead of his usual spring plate method.
The shorter sight is the last unmarked style before MOTTY became his mark, the basics are the same as the extended leg sight, made to adapt to a different style rifle. The short sight was designed for the No.1 configuration.
Attachment 129037
Just a glance at his folders(Except for the ring in fixed arm at the bottom) all are different in some small design feature.
Attachment 129036
First off, thanks to Nic Weston (RIP), Tony Cattermole, and Alan de Enfield for compiling and presenting this excellent and near complete treatise on Lee Enfield sights. Into my possession has come a civilian Territorial target rifle with interesting and at least to me, heretofore unknown sights. The sights were made by Vickers Son and Maxim and comprise a rotating quadrant style base for the rear sight to correct for windage and what best can be described as a 'ghost ring' front sight. Extensive online searches have found very little information on these sights so I'm hoping members of this august body will be able to shed further light on when these sights were produced, how common were they, and most importantly, how to use them.
Information on Marbles Vickers Maxim (VM) front sight, along with information on all Marbles Sights can be found in Nick Stroebel's OLD GUNSIGHTS a Collectors Guide 1850 - 1965
Page75 to 77 deal with this sight.
Chapter 4 of Nick's OLD GUNSIGHTS and Rifle Scopes also has detailed information.
I'd post pic's of the relavent pages, but this would be a copyright infringement.
Just to throw another rare one at you, Stan Edwards 1924 patent 17,575/24 complete with equally rare Central patent 143,379 peep.
Now at first sight you will note features of both Mues and Motton, but thats where the similarities end, Mues style Elevation lock knob although different in the patent - may be a replacement.
Motty leaf spring for windarm. This one has additional plate to tighten spring, not that it needs it when set correctly.
This is the second I have seen, this one has the patent number ground off the mounting point, but has Edwards stamped on the inner face.
Attachment 131815Attachment 131816Attachment 131817Attachment 131818Attachment 131819
These odd sights just keep growing. Not totally unmarked but very faint and no name.
But a familiar shape if nothing else.
Attachment 134931Attachment 134932Attachment 134933
BSA No.9 on the right by the look of it.
https://www.milsurps.com/images/impo...9cAD1909-1.jpg