Shooting my No 4(T) at 1,000 yards

Well, why not? The scope is calibrated that far :D.

I was on our club's long range (1,200 yards max) on Saturday, we were shooting 800/1,000/1,200 yards, so I thought for a giggle I would take the 4 (T) as well as my long range .308.

At 800 the 4 (T) was relatively straightforward to shoot (allowing for the fact the sight post point covered the whole of the vbull). Once I got the elevation figured out, it would put everything in the black (there was a fair breeze running across the range) with the best a lucky vbull. I could just about see the spotting disc at this range :D.

At 1,000, again once the elevation was figured out, it would put pretty much everything on target, but not with any meaningful grouping.

(I didn't try it at 1,200 ;) ).

I am currently using Kynamco ammunition loaded with a 174gn SMK bullet, which probably replicates Mk 7 ball fairly accurately.

Above all, the 4 (T) is just fun to shoot, and it is nice to stretch it out distance wise now and again :).

Quote:

---

Originally Posted by David TS

I am currently using Kynamco ammunition loaded with a 174gn SMK bullet, which probably replicates Mk 7 ball fairly accurately.

---

Does it fully replicate to down to the flat base bullet?

Quote:

---

Originally Posted by Beerhunter

Does it fully replicate to down to the flat base bullet?

---

Unfortunately not, it is a boat tail. I don't reload, and I don't know of anyone in the UK (Kynamco, HPS, PPU) that loads commercial rounds with a flat base :(

My SMLE does not like BT one bit, now with FB she groups real well

Hi NRA. Which FB do you shoot? I've just started reloading and trying them all! Cheers, Don

Quote:

---

Originally Posted by David TS

Unfortunately not, it is a boat tail. I don't reload, and I don't know of anyone in the UK (Kynamco, HPS, PPU) that loads commercial rounds with a flat base :(

---

The Kynamco I have does have the flat base bullets

(excuse the quality of the sectioning I only had a rusty screwdriver and an angle-grinder)

https://www.milsurps.com/images/impo...SCF00292-1.jpg

https://www.milsurps.com/images/impo...SCF00261-1.jpg

I do not reload I have used new Prvi BT rounds and had very bad consistent groups. I then tried Pakistani FB surplus rounds with much better successes. Then I got real lucky and found some surplus British rounds and she performs very well with these rounds.

Quote:

---

Originally Posted by Alan de Enfield

The Kynamco I have does have the flat base bullets

(excuse the quality of the sectioning I only had a rusty screwdriver and an angle-grinder)

https://www.milsurps.com/images/impo...SCF00292-1.jpg

https://www.milsurps.com/images/impo...SCF00261-1.jpg

---

Now that's really interesting, thank you.

I didn't realise Sierra actually did a flat base SMK! They list them as a BT. Guess I'd better pull one of mine and see what I have ;)

Quote:

---

Originally Posted by David TS

I didn't realise Sierra actually did a flat base SMK! They list them as a BT. Guess I'd better pull one of mine and see what I have ;)

---

If they do- let us know! I'm thinking Beerhunter is using different ammo than Alan de Enfield. Both just happen to be Kynamco brass under the bullets.

Quote:

---

Originally Posted by jmoore

If they do- let us know! I'm thinking Beerhunter is using different ammo than Alan de Enfield. Both just happen to be Kynamco brass under the bullets.

---

I think that you are confusing me with someone else. I haven't commented on what I currently use; which happens to be PPU boat-tails because I can't get a flat base bullet.