Search:

Thanks for the input. I want to do it right, so I ordered some brass shim stock, and will try shimming the front pad out a couple of thousands at a time till I get it perfect. Then when I shoot it at...

aircraft broke the other night, eng.1 computer would"nt play nice with eng.2 computer, so i had a chance to pull the scope and see if it was collimated, not even close. after numerouse tries,...

Sorry for any confusion, the rifle and scope are both clones, I was told the scope was centered to the bore, and when I bore sited it with drift at 0 and elevation at 1 it appeared to be. The...

180 grn soft points

Thanks for the reply, bought the rifle with the mounts installed , then found a used scope. The range drum was set to 100 yrds, I used 0 to bore site and see where the grat was, it looked centered, ...

Hi guys,have a #4 t clone, have some questions about zeroing at 100 yrds. That being said, I read and reread, Peter laidliers, building a clone,and am still confused. I donot have an area I can bore...

Thanks for the advice,

Thanks for the help, I think we'll try some gun shows, and maybe compare bolts and cocking pieces, mean while my son can blast all the metal parts and clean and refinish the wood, since it has no...

sorry patrick had problems with the upload, hope the pics help, i'm at a loss for what bubba did, and may need to try to find or borrow a complete bolt.

5474654747547485474954750547515475254753

thanks for the reply

Hi guys, son brought home a really worn out Spanish mauser. ( maybe usable parts worn out) but since its so bad, good project gun for him to learn on. Problem, safety on bolt inopt. Took bolt apart...

Hi guys, new to mausers, looking for some help, my son came home from a gun show with a really worn out Spanish 1916 mauser. The rifle needs to be completely redone, so it's a great project gun for...

Thanks for all the info, I have one ordered from brownells, their back ordered at this time.

Thanks I will

Thanks for the info guys, I've never worked on a barrel out of the lathe. Thanks chuck I was unaware it was improper to not use a pull thru, I was misinformed . Can I assume using a t handle reamer,...

Hi guys, finishing a a4 clone, that I put a new gi barrel on, and need to set the head spacing. I do not own a 30-06 finishing reamer and was looking to buy a pull thru, when I came across a company...

Thanks for the pics, I bought a training bolt, and was able to form a pretty good clone of the a4 from your pics and what I was able to find on the Internet . I then cut it off and tig welded it to...

hi guys, new to forum and 1903s. i found a bubba'd a3 with the action already drilled for a scope so its a great canidate for an a4 project. i,ve already found out the new style redfield scope base...