+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15

Thread: M38 Carcano Carbine, 1939

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Midmichigun's Avatar
    Join Date
    Sep 2010
    Last On
    01-10-2017 @ 10:06 PM
    Location
    Michigan
    Posts
    459
    Local Date
    03-28-2024
    Local Time
    07:06 AM

    M38 Carcano Carbine, 1939

    Guys,
    As luck would have it, I came across a boltless M38 Carcano!






    I am missing 3 screws along with the bolt.


    Great photo of the peeling paint! If you look at some of the photos, you can see that they managed to splash some of the paint onto the blue!



    ---------- Post added at 10:42 PM ---------- Previous post was at 10:33 PM ----------










    The year is 1939. I found this "39" also stamped on the underside, I guess it is a year stamp also???


    Inner arsenal/ inspection marks. As you can tell, the blueing is great on this rifle!


    The buttstock is the worst part of the rifle... and has left stains on the wood. The door opens, so it does function!
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by Midmichigun; 05-06-2012 at 10:51 PM.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    03-28-2024
    Local Time
    08:06 AM
    Looks like you have a good project. But I was expecting something a bit shorter. Generally these are referred to as M38 "short rifles". The carbine is yet more stubby. (Might help you find the correct nose cap screws as well.) The 7,35 round I like, but ammo availability is poor.

    In actual fact I may have one of your screws as my M38 carbine's nose cap screw is too short. So I've a part to find as well.

  4. Thank You to jmoore For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    Midmichigun's Avatar
    Join Date
    Sep 2010
    Last On
    01-10-2017 @ 10:06 PM
    Location
    Michigan
    Posts
    459
    Local Date
    03-28-2024
    Local Time
    07:06 AM
    Thread Starter
    Jmoore,
    Please take me to school, and I would appreciate a Moderator changing the title of my post if I am in error.

    I don't know much about the Carcano... did no research (beyond looking for bolts).... and simply bought it! I was under the impression it was a carbine... Big oops for me!

    Should I be looking for a regular rifle bolt for it then?

    What is the deal with the brown paint? Should I leave as is... or strip it.... My impression is that the finish is actually BLOicon on a European Walnut...

    Back story is that I saw it Saturday on a rack with a bunch of M1/ M14icon/ 1903 stocks. Asked the price.... the lady figured it was "something Italianicon". I saw the Terni stamp, and figured it was some sort of Carcano (?)! The price was pretty low.... so I drove back on Sunday... wherein the price was up $15.00.... But I did get it for the Saturday price...

    I have several "SA" stamps on the metal... my impression is that this shows a finnish provenance?

    I have been able to find many parts for it via the 'net... but any help is appreciated! I am posting here, to gain insight on what I stumbled onto!

  7. #4
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-28-2024
    Local Time
    02:06 PM

    Wood looks good for refurbishing

    As jmoore has pointed out, you have a short rifle "fucile corto M38". Made in 1939, year 17 of the fascist era - as shown by the Roman numerals XVII. And the number T7759 is in the right range for Terni production of that period. The FP on the barrel is probably the supplier F. Pedrotti.

    The bolt will be basically the same as on a normal M91, but with a turned-down bolt handle as used on the "moschetto M91". In fact, since the Italians made some of these short rifles by converting M91s, including bending down the bolt handle, I see no reason why you should not do the same.

    With the wood, you are in luck. You have what I call a treacle rifle - the treacle being the brown paint/floor varnish that has been sloshed over the wood. And which has probably helped to preserve it! If you dismantle the rifle and strip off the paint with a non-aqueous jelly-type paint stripper (use gloves and natural bristle brushes!) you may find that this
    Attachment 33534
    turns into this

    Attachment 33535

    - requiring only a wipe-over with a rag moistened with natural turpentine and a few drops of pure linseed oilicon to produce a very pleasing finish. But do not, at any stage, use wire wool or sandpaper on the stock, or soak it in water, as that will cause the arsenal ring stamp on the wood to disappear. And this stamp, if you clean the wood as suggested, may provide important information.

    As to SA marks. The Finns stamped SA as a property mark on the barrel ring. They had no need to stamp SA on small parts. So if you have SA marked on various components, I suspect that this is no more than a parts supplier identification mark. But a clear SA on the barrel ring does indeed indicate Finnishicon ownership.

    Have fun, and let us see how it turns out!


    Patrick
    Last edited by Patrick Chadwick; 05-07-2012 at 10:15 AM.

  8. The Following 2 Members Say Thank You to Patrick Chadwick For This Useful Post:


  9. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    Midmichigun's Avatar
    Join Date
    Sep 2010
    Last On
    01-10-2017 @ 10:06 PM
    Location
    Michigan
    Posts
    459
    Local Date
    03-28-2024
    Local Time
    07:06 AM
    Thread Starter
    Guys,
    Great information. As to the bolts, I found a source who says the following:

    "Vintage Italianicon military Carcano bolts. We have both Carbine (bent down bolt handle) and Rifle (straight handle) available. Interchangeable with both the 6.5mm and 7.35mm caliber firearms. "

    My impression is that I can either use the Carbine (in my short rifle) or the Rifle (and perhaps bend the handle down) from this source?

    As to the paint, is this then "factory" or applied by the Finns (I appear to be SA marked). It sounds like this condition has been noted before with the Carcano's? Should I cover this great wood, or cover with brown paint!

    What type of slings are available. My source lists "M91 rifle" slings, but doesn't mention if they fit short rifles.

  10. #6
    Legacy Member vintage hunter's Avatar
    Join Date
    Dec 2010
    Last On
    @
    Location
    S.C.
    Age
    56
    Posts
    1,680
    Local Date
    03-28-2024
    Local Time
    08:06 AM
    The correct bolt for your rifle would have a turned down handle. The paint was most likely applied by a former owner after it left military service.

  11. Thank You to vintage hunter For This Useful Post:


  12. #7
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-28-2024
    Local Time
    02:06 PM
    Quote Originally Posted by Midmichigun View Post
    As to the paint, is this then "factory" or applied by the Finns (I appear to be SA marked).

    Neither factory nor applied by the Finns. Painted stock wood is a sign of that notorious fudger known as Bubba.
    As far as I know, no original military rifle manufacturer ever applied paint to stock wood. Most common is linseed oilicon, sometimes shellac, urushi lacquer, tung oil, linseed oilicon/wax mix - all have been used, but PAINT - I think not. And you can see why - it is flaking off.
    Quote Originally Posted by Midmichigun View Post
    Should I cover this great wood, or cover with brown paint!
    Thou canst not be serious! Get rid of that crud, and let's see the wood. If the before/after photos of the treacle rifle didn't convince you, I give up!



    Patrick
    Last edited by Patrick Chadwick; 05-07-2012 at 05:42 PM.

  13. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    Midmichigun's Avatar
    Join Date
    Sep 2010
    Last On
    01-10-2017 @ 10:06 PM
    Location
    Michigan
    Posts
    459
    Local Date
    03-28-2024
    Local Time
    07:06 AM
    Thread Starter
    Quote Originally Posted by Patrick Chadwick View Post

    Thou canst not be serious! Get rid of that crud, and let's see the wood. If the before/after photos of the treacle rifle didn't convince you, I give up!



    Patrick
    HA HA! They call me "Billy the Beltsander" on other forums!

    Seriously though Here are some cartouches that I found under the "gack"....

    It says Terni, and I am trying to work out the rest!
    This appears to be a PB...

    I can't make out this one... I thought it was a boxed SA, but upon closer examination... it isn't..

    I do have staining under the paint at the buttplate area...

    No way to deal with it beyond bleaching the wood.... not a good choice... so I am probably going to just leave it.
    Overall photo of the stock with a basic coat of BLOicon!

  14. #9
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    03-28-2024
    Local Time
    08:06 AM
    Wood looks about right, colorwise, and is in good overall shape. If the bore's that good, then you will have a very nice specimen. Fortunately, bolts aren't generally serial numbered (there are exceptions- but not for this model) so if you get one that works in your rifle and looks of proper vintage it'll be a fine save. (The pre WWII bolts have a nicer finish usually, sometimes with color case hardening evident.) The bolt's extraction cams sometimes need work or swapping about to get good primary extraction and smooth operation, but anything is better than nothing at this point.

  15. Thank You to jmoore For This Useful Post:


  16. #10
    FREE MEMBER
    NO Posting or PM's Allowed
    Midmichigun's Avatar
    Join Date
    Sep 2010
    Last On
    01-10-2017 @ 10:06 PM
    Location
    Michigan
    Posts
    459
    Local Date
    03-28-2024
    Local Time
    07:06 AM
    Thread Starter
    Jmoore,
    Thanks for the suggestion on the bolt!
    As you can see the upper handguard color doesn't match the rest of the stock. Not a big deal.
    I have a line on my missing screws, but it appears that I have to buy the end nose, to get the screws! Middle band is also missing its screw, and I might have to purchase an entire band to get a replacement. However, Springfield Sporters does list parts separate... I have heard mixed reviews for them especially on the customer ordering end.
    The bore doesn't look that great, but I am still soaking the crud out. But it may be a shooter still.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. New fixer-upper 1891 Carcano Cavalry Carbine
    By Aragorn243 in forum The Restorer's Corner
    Replies: 49
    Last Post: 04-22-2012, 09:51 PM
  2. New fixer-upper 1891 Carcano Cavalry Carbine
    By Aragorn243 in forum Milsurps General Discussion Forum
    Replies: 17
    Last Post: 04-11-2011, 04:58 PM
  3. 1939 K98 Mauser help
    By bulldog_mack13 in forum Mauser Rifles
    Replies: 24
    Last Post: 03-17-2011, 01:54 PM
  4. 1939 42code K98
    By rich v in forum Mauser Rifles
    Replies: 2
    Last Post: 01-15-2011, 08:26 PM
  5. 10-089 Garand Picture of the Day - 1939
    By Mark in Rochester in forum M1 Garand/M14/M1A Picture of the Day Forum
    Replies: 0
    Last Post: 04-04-2010, 09:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks