+ Reply to Thread
Results 1 to 6 of 6

Thread: Forming Martini henry cases

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    John Kearns's Avatar
    Join Date
    May 2011
    Last On
    02-11-2020 @ 12:49 PM
    Location
    Canada
    Posts
    7
    Local Date
    03-28-2024
    Local Time
    03:34 AM

    Forming Martini henry cases

    Hello
    Befor i but a martini henry rifle I want to be sure I can actually form my own cases from the 24 ga shotshells. There is a video on youtube showing a full length sizing die bored out to 9/16" to use as an intermediate forming die. I am try to find out if that is all that is needed to be done to the die. For example does the opening need to be relieved at its base?

    any advice is gratefully accepted
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel smellie's Avatar
    Join Date
    Jan 2008
    Last On
    01-14-2019 @ 09:17 AM
    Location
    Virden, Man. Pop 3250, 4 miles from Wolverine's range!
    Posts
    632
    Local Date
    03-28-2024
    Local Time
    04:34 AM
    Well, friend, never let it be said that you start us off with the easy questions!

    Barnes (COTW-6) gives base diameter for the 24-bore as .618 and he gives neck diameter for the .577/.450 Martini-Henry as .487, dimensions which agree pretty closely with specimens I have here. I am assuming that you are going to be using those nice Magtech brass cases from Brazilicon, the ones that Cabelas imports. You CAN use the Fiocchi composite plastic cases from Italyicon, but the problems are entirely different.

    I have done a fair bit of brass-forming over the years and that IS a fair bit at one go. Normally, when you are forming cases, you go one or two"standard" sizes at a step: form a .30-cal neck to a .32 or .33, but definitely think twice about going straight from .30 to .35. And that's opening them up. Going DOWN in size, which is what you want to do, you aren't stretching the brass, you're trying to compress it...... perfectly concentrically and without a single tiny ripple which WILL give you a weak spot when you fire it.

    From time to time, I make up keychains, using cartridges that I pick up on the local range, forming them to something that looks snazzy. I have no trouble going from a .38 to a .30 in a single pass (.38 Special in a .30 Mauser die) and little trouble going from a .30 to a .22 (.30 Carbine into a .21 Bee die) but that is about the limit without folding the brass. For a keychain, this would not matter, but it would be a weak (expensive) casing in a rifle. And you are going for about DOUBLE that reduction.

    I think the idea of an intermediate die is good, and 9/16, which is .5625, is a convenient size and one which will be effectual for you.

    This leaves you with the problem of expense. RCBS makes a full set of case-forming dies for the .577/.450 MH but they are VERY costly. Likely the best deal on the market right now for dies is the LEE Precision set, which you can order from Lee Factory Sales for about C$90. That set contains the two dies you will need for reloading, plus the shellholder. These are the LARGE diameter dies and they have a thread size (IIRC) of 1-1/8x12, so you will need a BIG press, RCBS Rockchucker or its current Hornady or Lyman or Lee equivalent, the Lee being by far the cheapest of these.

    The idea of 'boring out' a sizing die to 9/16 sounds fine..... until you find out that there is a lot more to it than just running a drillbit into the thing. Those dies are HARD and they must be reduced in hardness before you can do anything radical with them. So you have to NORMALISE the die, bore it out, polish it and then re-harden it....... and that leaves you with a wrecked sizing die, so you have to buy another of those....... and you have a bill at the machine-shop for more than you paid for the die that you just wrecked.

    But you don't NEED to bore out a sizing die. All you need is something to squish the brass down to a nominal 9/16.

    So here's one for you. Elwood Epps, for many, many years, was Canadaicon's premier gunsmith. Ellwood did a LOT of experimenting in his career, so very much, in fact, that he developed a whole SET of dies for cartridge-case conversions. Ellwood is gone now, but his COMPANY still is in business out on Highway 11, North of Orillia, out in the lake country. They still build custom rifles and the like and they have a top-notch machinist/gunsmith on staff. Talk to them and see if they have a die for this purpose already made, or if they can run you off one at a reasonable price. They KNOW what is entailed in this conversion and they CAN make the tools without doing a lot of experimenting which YOU get to pay for (time is money).

    All you really need is something with a POLISHED 9/16 hole through the middle, your correct THREAD on the outside and a POLISHED tapered section with a RADIUSED edge, to take your .618 brass down to .5625.

    It should work.... and it shouldn't cost an arm, a leg, or the Cat's dinner for the next 6 months.

    BTW, I note the lowest-possible post number. Welcome aboard, friend! It's a great ride and a fun ride..... and the more the merrier!
    .
    Last edited by smellie; 07-23-2011 at 02:02 AM.

  4. Thank You to smellie For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Contributing Member Ax.303's Avatar
    Join Date
    Dec 2010
    Last On
    03-26-2024 @ 11:41 PM
    Location
    NW Ontario Canada
    Posts
    170
    Local Date
    03-28-2024
    Local Time
    03:34 AM
    For the record.
    It is a common misconception. But...

    The Late Great Ellwood Epps was not connected to what is now Ellwood Epps Sporting Goods. If he was alive today he would have a fit.

    I spent a fair bit of time talking with Ellwood, and my .577/.450, .280 Ross & .43 Mauser dies all came from him. As well as a good bit of knowledge.
    I remember when Epps Sporting Goods opened up he was livid. He was Gramps Antique Cartridges at the time, and even ranted about it in his flyers.

    If I dig hard enough I might even still have some of these.

    So while Ellwood Epps Sporting Goods may be a good store with good people. I feel I should mention this in respect of this very fine man.

  7. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    william's Avatar
    Join Date
    Jul 2010
    Last On
    03-25-2013 @ 10:33 AM
    Location
    Quartzsite, az,
    Posts
    16
    Local Date
    03-28-2024
    Local Time
    01:34 AM
    There is another (a few actually) u-tube showing the annealing process to de-temper the brass before you try to form it in a die. There was a very high failure rate before the process was learned. It took a lot of small moves before the shells were coming out with minimum wrinkles.

  8. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    John Kearns's Avatar
    Join Date
    May 2011
    Last On
    02-11-2020 @ 12:49 PM
    Location
    Canada
    Posts
    7
    Local Date
    03-28-2024
    Local Time
    03:34 AM
    Thread Starter
    Elwood was indeed a legend. My dutch uncle and he were great pais and i spent many afternoon visits in his kitchen listening to them talk guns. I belive I fired my first centerfire on the range out back. Elwwod had built my uncle a donaldson wasp on a wincester hi wall. THat would be around 1949 or 1950. I still have a model 70 he barreled in the wasp. It stil shoots beautifully. He is missed by all who knew him. Sorry to wander off topic.
    I had a sizing die bored out to the 9/16"
    trim, anneal. size, annea,l final size very easy to do with no brass loss. My trimming method needs improving but all in all much easier than I had expected it to be.

  9. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    Richardwv's Avatar
    Join Date
    Mar 2009
    Last On
    09-05-2017 @ 07:24 PM
    Location
    Back Creek Valley, WV
    Posts
    97
    Local Date
    03-28-2024
    Local Time
    04:34 AM
    Before investing the time/energy/money in making reformed brass from 24 gauge shells, I'd strongly recommend you find out whether they can be safely used in YOUR martini. The wide variations in chamber dimensions (something like 30 different official specs during the rifle's service life), plus over a century of wear makes a high percentage of these rifles (around a third) unsuitable for reformed brass. For a further education, see: Word of caution about balloon head cases

    I have formed literally 1000s of these cases and use them extensively. But the fact remains they most definitely aren't for every Martini and it isn't just wear that is at issue. Some of the chambers from day one have been unsuitable, since they leave the critical head/wall junction unsupported. Fortunately the penalty for head seperation isn't as high with the Martini as with many rifles, but it still isn't fun and could cause eye injury to anyone nearby without eye protection.

+ Reply to Thread

Similar Threads

  1. Martini Henry 303
    By douglas670 in forum Martini Henry Rifles
    Replies: 2
    Last Post: 03-30-2010, 02:32 PM
  2. Best Martini Henry
    By MIL rifle1 in forum Martini Henry Rifles
    Replies: 12
    Last Post: 03-08-2010, 05:14 AM
  3. .303 Martini Henry pistol!
    By A. F Medic in forum Other Military Service Pistols and Revolvers
    Replies: 7
    Last Post: 07-24-2009, 01:38 PM
  4. .303 Martini Henry pistol!
    By A. F Medic in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 0
    Last Post: 07-21-2009, 12:10 AM
  5. Martini Henry fun today
    By smle-man in forum Martini Henry Rifles
    Replies: 10
    Last Post: 07-07-2009, 03:15 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks