+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16

Thread: Navy arms RFI .308 rifles

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Engine49guy's Avatar
    Join Date
    Mar 2009
    Last On
    10-08-2010 @ 12:02 AM
    Posts
    10
    Local Date
    03-28-2024
    Local Time
    05:01 PM

    Navy arms RFI .308 rifles

    I recently aquired 2 RFI Ishapore rifles in .308 caliber.
    The first is a standard length rifle with forward ramp site in .308.

    The second is a carbine,
    It was described as a "Navy Arms" conversion" although I cannot find any markings with that name.

    It has a shortened appearence similar to a No.5 Jungle carbine complete with muzzle flash cone and bayonet.
    There are several noticable differences from a standard No.5 Jungle Carbine I notice such as sites, buttstock pad, wood stocks, The most noticeable is the different magazine being chambered for .308 NATO.

    Can anyone tell me a bit about these and their approximate values?
    Also, Very curious if they were converted after they left the Ishapore factory, Or were they originally made to be .308?

    These pictures are identicle to my rifle except mine is a 1965 and says 7.62mm2A instead of 2A1.
    Thanks


    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Head Moderator
    (Founding Partner)

    Site Founder
    Stevo's Avatar
    Join Date
    Oct 2006
    Last On
    08-31-2015 @ 06:39 PM
    Location
    NW Alberta
    Posts
    2,357
    Local Date
    03-28-2024
    Local Time
    03:01 PM
    They were manufactured in 7.62 NATO and "bubbafied" into carbines in the US.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    RJW NZ's Avatar
    Join Date
    Aug 2008
    Last On
    10-04-2014 @ 11:58 PM
    Location
    Auckland NZ
    Posts
    1,241
    Local Date
    03-28-2024
    Local Time
    02:01 PM
    Despite comments about bubbae etc I really liked mine, cheap to feed and fun to shoot.

  6. #4
    Head Moderator
    (Founding Partner)

    Site Founder
    Stevo's Avatar
    Join Date
    Oct 2006
    Last On
    08-31-2015 @ 06:39 PM
    Location
    NW Alberta
    Posts
    2,357
    Local Date
    03-28-2024
    Local Time
    03:01 PM
    Quote Originally Posted by RJW NZicon View Post
    Despite comments about bubbae etc I really liked mine, cheap to feed and fun to shoot.
    They're kinda like a moped, cheap, fun to drive and they get you where you want to go. You just don't want your Harley-riding buddies to see you on one.

    If they were available in Canadaicon, I'd pick one up. They'd make a great truck gun. Mount an Aimpoint and a muzzle brake and you'd be good to go.

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    Engine49guy's Avatar
    Join Date
    Mar 2009
    Last On
    10-08-2010 @ 12:02 AM
    Posts
    10
    Local Date
    03-28-2024
    Local Time
    05:01 PM
    Thread Starter
    When I hear Bubbafied I think garage and hacksaw.
    Were these converted by a legitamite company?
    I have heard the name Navy arms but cant think of what they make...
    Was it single action revolvers?
    Took a pic of the 2 together..


  8. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    blacksan's Avatar
    Join Date
    Sep 2009
    Last On
    03-16-2014 @ 10:06 AM
    Location
    Virginia
    Age
    59
    Posts
    15
    Local Date
    03-28-2024
    Local Time
    05:01 PM
    Those rifles where converted in a now defunct shop in Martinsburg, WV. Gibbs/Navy Arms at one time was a neat place to visit because they had tons of stuff stacked in there shop and it was a treasure hunt smeared with cosmo.

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    RJW NZ's Avatar
    Join Date
    Aug 2008
    Last On
    10-04-2014 @ 11:58 PM
    Location
    Auckland NZ
    Posts
    1,241
    Local Date
    03-28-2024
    Local Time
    02:01 PM
    Hey, Engine 49er, the bubba name has come about more because purists don't like to see a good gun 'improved' with mods that make it less of a gun afterwards and ruin any collectibility too. In fact most of the work they did was adequate by gun modifier standards, and there were also one of two stories about some shoddy work, so these have lingered in peoples minds. Overall though the guns they made are in fact pretty popular with people who own them.
    If the price is right buy, don't hesitate.

  10. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    Engine49guy's Avatar
    Join Date
    Mar 2009
    Last On
    10-08-2010 @ 12:02 AM
    Posts
    10
    Local Date
    03-28-2024
    Local Time
    05:01 PM
    Thread Starter
    Thanks for the help.
    Brought them to the range with some cheap Indian ammo I had laying around.
    Shot great.
    Great fun for a day of informal shooting.

  11. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    blacksan's Avatar
    Join Date
    Sep 2009
    Last On
    03-16-2014 @ 10:06 AM
    Location
    Virginia
    Age
    59
    Posts
    15
    Local Date
    03-28-2024
    Local Time
    05:01 PM
    Quote Originally Posted by Engine49guy View Post
    Thanks for the help.
    Brought them to the range with some cheap Indian ammo I had laying around.
    Shot great.
    Great fun for a day of informal shooting.
    I also have one that I bought years ago and it is fun to shoot. Mine has a good bore and also reasonably accurate too. I guess the folks at Gibbs where sober/happy when they made mine.......... I only wished I would have purchased another as they where pretty dam cheap at the time.

  12. #10
    FREE MEMBER
    NO Posting or PM's Allowed
    RJW NZ's Avatar
    Join Date
    Aug 2008
    Last On
    10-04-2014 @ 11:58 PM
    Location
    Auckland NZ
    Posts
    1,241
    Local Date
    03-28-2024
    Local Time
    02:01 PM
    Last USAicon gunshows I was at the 45/70 conversions were constantly over $400, and I always noticed people online asking for them too.

    Story; at that Costa Mesa show in 2003 ish a buddy and I were lingering at the end of the day and someone walked in carrying two rifles, navy arms, jungle carbine and a stock but nice ishapore. He was trying to get beer money from the rifle sale. I helped him by getting the carbine, and at first glance down the bore it was blocked with something, so I blew and sucked and tried my best but what ever it was wouldn't come out so I took a gamble on the bore and for $100 it was mine.
    Later I poked a dowel through a bore and a bludy big black widow fell out. Moral of the story? Don't suck on the end of a cheap gun barrel, you could get a lot more than bargained for.

    It turned out to be one of my favorite shooters.

    Now that you own one of these shall we say 'illegitimate' enfields, I tried one at the range that had two slots cut across the top of the flash cone. It completely did away with muzzle rise!
    A gun shop was making them and they're available online, but you have the kind of rifle thats forgiving of worthwhile experiments like that, just a thort.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Navy Arms 1851 cartridge conversion
    By RCS in forum Black Powder
    Replies: 6
    Last Post: 11-10-2009, 09:34 PM
  2. Navy Arms 03A4's
    By Homer03 in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 8
    Last Post: 07-25-2009, 05:04 PM
  3. Marcus Luttrell's (Navy Seal and Navy Cross Recipient) dog shot by some punks
    By mojalajab in forum The Watering Hole OT (Off Topic) Forum
    Replies: 6
    Last Post: 04-08-2009, 08:33 PM
  4. REME Precis No. SA/Rifles/3 (Zeroing of No.1, No.3, No.4, No.5 Rifles)
    By Badger in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 0
    Last Post: 05-13-2008, 10:15 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks