+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: Dating an Ishy

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    lngstrt's Avatar
    Join Date
    Jul 2007
    Last On
    08-31-2018 @ 08:00 PM
    Location
    Central Southwest
    Age
    67
    Posts
    138
    Local Date
    03-28-2024
    Local Time
    08:31 AM

    Dating an Ishy

    I have a N01 Mk III Ishapore that I am stumped regarding the date of manufacture. The S# is 130xx Z. No letter before the #. It has an FR 40 mark.



    The barrel is numbered to the receiver.



    There is no RFI or date on the bolt side of the receiver.

    It has the cut-off slot.



    Any thoughts on when she might have been made?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Moderator
    (Milsurp Forums)


    Amatikulu's Avatar
    Join Date
    Dec 2007
    Last On
    12-30-2023 @ 05:23 PM
    Location
    USA
    Posts
    1,282
    Local Date
    03-28-2024
    Local Time
    10:31 AM
    The FR 48 indicates it was completely rebuilt in 1948 - whatever marking that would identify it before that were removed. Does the barrel have a date on the left side of the knox form?
    Last edited by Amatikulu; 11-08-2009 at 07:21 AM. Reason: next time I'll wear glasses

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel Thunderbox's Avatar
    Join Date
    Dec 2008
    Last On
    01-10-2022 @ 02:07 PM
    Posts
    1,150
    Local Date
    03-28-2024
    Local Time
    03:31 PM
    1948 rebuild of - probably - an English 1914-16 rifle. Show us the right butt socket markings, and anything on the left side of the barrel.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    lngstrt's Avatar
    Join Date
    Jul 2007
    Last On
    08-31-2018 @ 08:00 PM
    Location
    Central Southwest
    Age
    67
    Posts
    138
    Local Date
    03-28-2024
    Local Time
    08:31 AM
    Thread Starter
    I'll look at the barrel again but I don't recall a barrel date. There are absolutely no markings on the butt socket on the bolt handle side ... none. Doesn't even look 'scrubbed', although it must have been.

    There are GRI marks on receiver and barrel.

    [/IMG]

    I'll take more pics later.

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    lngstrt's Avatar
    Join Date
    Jul 2007
    Last On
    08-31-2018 @ 08:00 PM
    Location
    Central Southwest
    Age
    67
    Posts
    138
    Local Date
    03-28-2024
    Local Time
    08:31 AM
    Thread Starter
    Still no extra pics but, definitely no date and the butt socket, on the bolt side shows no signs of scrubbing. Absolutely smooth. Usually you can see evidence of the scrub.

    What does the serial number tell us? 'Z' after the 5 digit number. Did I read somewhere that Ishapore started the letters backwards on one of their FR series? In the 1960's maybe?

  8. #6
    Legacy Member krinko's Avatar
    Join Date
    Aug 2008
    Last On
    01-28-2024 @ 02:39 PM
    Location
    Omaha-ha-ha, Nebraska
    Posts
    337
    Local Date
    03-28-2024
    Local Time
    09:31 AM
    You are dead right about the serial number prefixes running backwards for these second type FR rifles----I have an "FR '49" rifle with an "X" prefix.
    The smooth right side of the buttsocket is normal for these rifles----but do I spy a Britishicon "GR" proof on the receiver ring just below the Indian "GRI" proof?
    If so, that's more origin information than I've ever seen left on an FR.
    -----krinko

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    lngstrt's Avatar
    Join Date
    Jul 2007
    Last On
    08-31-2018 @ 08:00 PM
    Location
    Central Southwest
    Age
    67
    Posts
    138
    Local Date
    03-28-2024
    Local Time
    08:31 AM
    Thread Starter
    Ya' gotta love the mysteries some of these old girls present!! The second and third Enfields I bought a couple years ago were this Ishy and a 1914 BSA. The BSA has 'EY' on the Knox form and receiver. But ... It also has the Ishapore screw. Does that mean it was marked EY and then shipped off to India or did the Indians mark it EY?
    The Ishy has DP stamped in the wood of the fore stock but nowhere on the metal parts. Also evidence of 'removed' yellow paint on the fore stock. I suspect it was re-stocked with DP wood somewhere along the line and the 'evidence' removed. Headspace is a bit loose with a SAAMI gauge but otherwise checks out good.
    Mysteries .... perhaps only the Shadow knows.
    Last edited by lngstrt; 11-09-2009 at 10:27 AM. Reason: spelling ... :)

  10. #8
    Legacy Member Sunray's Avatar
    Join Date
    Mar 2009
    Last On
    03-29-2021 @ 03:01 PM
    Location
    London, Ontario
    Posts
    1,053
    Local Date
    03-28-2024
    Local Time
    11:31 AM
    The C.A.I. means Centrury Arms International. They are notorious for assembling rifles out of parts bins with zero QC. No headspace check to ensure the rifle is safe to shoot. Check the headspace before you do shoot it.
    Go here for good info(especially markings).
    The Lee-Enfield Rifle
    Spelling and Grammar count!

  11. #9
    Legacy Member krinko's Avatar
    Join Date
    Aug 2008
    Last On
    01-28-2024 @ 02:39 PM
    Location
    Omaha-ha-ha, Nebraska
    Posts
    337
    Local Date
    03-28-2024
    Local Time
    09:31 AM
    "The C.A.I. means Centrury Arms International. They are notorious for assembling rifles out of parts bins with zero QC. No headspace check to ensure the rifle is safe to shoot."

    OHare, is that you?
    -----krinko

  12. #10
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    05:31 PM
    Just another little point of interest and that's the kakhi paint undernath the woodwork of these rifles and Brens from not only India but elsewhere too. Early on in the war it was quickly established out in the tropics that the blueing process known to Armourers as 'browning' (don't ask me why, I haven't got a clue.....) and known chemically as 'rust blueing' or 'controlled corrosion' was at best, useless at protecting the steel or as a darkening process. It was also very time consuming too. So a solution was sought. In the meantime the process was abandoned everywhere outside the Ordnance factories and painting was approved. Just how dire the process was was quite clear with the BSA No5 rifles in Malaya and Borneo where the humidity and salt water laden silt would destroy the factory finish as soon as it got a sniff of it. Once rust had formed, it attacked its way into the wood too. We have the actual paint code and formula somewhere..........

    The nett result was that by 1944, Enfield started the first beadblasted finish, phosphated and over-painting with the spirit based oven bake paint finish that we have today and never looked back. There was a cut-off date for Enfield revolvers that was to follow the Mk3 Brens but I have seen nothing more. Quite clearly Fazakerley followed soon afterwards as can be seen on the post was rifles.

    Anyway, that's the story of the kakhi paint

    Incidentally, what finish is present underneath the layers and layers and layers of gloss paint found on the Ishapore rifles? Any ideas

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Help dating a Rock-Ola
    By maxwindage1 in forum M1/M2 Carbine
    Replies: 3
    Last Post: 07-25-2009, 12:45 PM
  2. Ishy 2a questions
    By redbaron in forum Gunsmithing for Old Milsurps
    Replies: 10
    Last Post: 03-04-2009, 08:36 AM
  3. I need help dating and identifying my No.4
    By a303shooter in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 2
    Last Post: 12-06-2008, 11:55 PM
  4. Ishy 2A/2A1 Rifle web site
    By Badger in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 0
    Last Post: 04-03-2007, 08:22 PM
  5. Ishy 2A1
    By Oatmeal Savage in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 5
    Last Post: 11-10-2006, 03:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks