+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15

Thread: Ross Rifle Mk II 5*

Click here to increase the font size Click here to reduce the font size
  1. #1
    Deceased May 2nd, 2020 Cosine26's Avatar
    Join Date
    Mar 2009
    Last On
    05-18-2020 @ 07:29 PM
    Location
    Cal
    Posts
    506
    Local Date
    03-19-2024
    Local Time
    02:43 AM

    Ross Rifle Mk II 5*

    Ross Rifle Mk II 5* (Part 1)
    A series of articles starting with “The ‘Stepchild’ Ross” by C.C. Meredith appearing in the November 1944 AMERICAN RIFLEMAN magazine and continuing through the ”Reviving the Ross” and “Ross Reversal” by G.H.V Stent in the April 1945 and May 1946 AMERICAN RIFLEMAN piqued my interest in the Ross Rifle. (These articles created quite a controversy in the “Dope Bag” section of the magazine for several months thereafter – both pro and con.) I had never seen one until I walked into a gun shop in New York and saw one leaning over in a corner. I recognized it by its distinct bolt handle shape and asked to examine it and was allowed to do so. I asked the price and the owner said $10. I offered him $5 and we compromised on $7.50. Neither of us could figure out where the serial number was located so the bill of sale simply says “One M1905 Ross Rifle”. From this page I now know how to identify the S/N.
    The rifle was only in fair condition. The stock was well used and bore several scars. The bore was/is dark but the rifling is sharp. I have fired the rifle and though it is not marked it does indeed have the large chamber. The cartridge case when extracted has very little neck left, the chamber is so large. The bolt face shows no indication of having been fired much. It is missing the hand guard between the receiver and the rear sight base.
    Ross Rifle Mk II 5* Part 2
    The description is as follows:

    http://i116.photobucket.com/albums/o...le/RossMks.jpg
    http://i116.photobucket.com/albums/o...le/Ross675.jpg
    LEFT SIDE OF RIFLE:
    1. On the left receiver wall is the annotation “Ross Rifle Co, Quebec Canadaicon 1905”. It looks to me as if the stamping was made after the receiver was hardened for it is very shallow.
    2. On the barrel there appears to be a pair of crossed flag. In the top opening of the pair is what appears to be a crown. In the bottom opening there appears to be a “P”. In the side openings are marks which I cannot decipher.
    3. Just below this there appears a crown and the letters “I” and “Q” running parallel with the bore with the crown on top.
    4. On the left side of the stock just behind the rear sight are the numbers “182” and “267”. The 182 is above the 267.
    5. On the left but stock just about where the rifleman would lay hs face the numbers are repeated only this time the 267 is above the 182.
    6. The stock has two cross bolts: one just even with the rear of the rear sight and the other just even with the front of the trigger guard.
    RIGHT SIDE OF RIFLE: Reading from the butt towards the muzzle there appears to be a series of marking which lie essentially in three columns.
    1. 60/80
    2. Below that A 13D (It looks as if someone had tried to strike over these with a common screw driver to obliterate them
    3. Two circles the larger being ¾ inch and the inner one being 3/16 inch. There is some sort of notation in the small circle but I cannot read it. Between the inner circle and the outer circle along the bottom of the larger circle appears the work “Quebec”.
    4. To the right of the circle towards the muzzle is the Notation “Roman Numeral II with a 5* above it. Further to the right is the notation “ (Underlined) 796 over 1910”. I take it that this is the S/N and the year of manufacture.
    5. Further to the right and in line with the first notation is the notation’ “6/15”
    6. Further to the right is the notation in capital letters “BMCD”. This had been “struck out” with the screw driver blade and directly beneath is the notation “CEF”. Below that is the notation: I 5” also struck out with the blade.
    Ross Rifle Mk II 5* (Part 3)
    The Sights:
    1. The rear leaf sight is marked at the top “Sutherland Rifle Sight Co, New Glascow N.S. and is really a wondrous thing. The rear of the leaf is marked: “ Pantd May 22 01, Apr 18 05 and May 21 07. The face is marked 6 to 19. I do not know the units.
    2. The slide contains an elevating screw, a lock screw and a windage adjustment screw. The windage part of the slide can be move right or left with an adjustment screw 25 units each calibrated in increments of 5. I do not know what the units are.
    3. Along the left side of the leaf are marks of 6/20/80/80 then a big “1”, followed by 20/40/60/80 and a big “2”. The slide is calibrated from 1 to 10 to act as a venire.
    4. The bolt is marked “51” on the bottom of the bolt handle rood and along the back is the “crossed flags followed by a crown and a “9”
    Ross Rifle Mk II 5* (Part 4)
    It is my conjecture that this is a Mk II 5* which made it to Franceicon with the CEF and was used for training. How it made it back to the US is a mystery. There are no markings ast would indicated that it served with the US Army. Some of my information come from “Sir Charles Ross and his Rifle” published by Museum Restoration Service, Ottawa Canada 1969. I would appreciate any comments.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by Cosine26; 07-25-2010 at 11:50 PM.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Administrator

    Site Owner
    Badger's Avatar
    Join Date
    Oct 2006
    Last On
    @
    Location
    Toronto, Canada
    Age
    75
    Posts
    12,940
    Real Name
    Doug
    Local Date
    03-19-2024
    Local Time
    03:43 AM
    My Videos in Video Club
    12

    Thumbs up

    Interesting ....

    In the Canada - Milsurp Knowledge Library (click here), we have on display a 1905 Mk II***** (5 star) Ross Rifle (click here)

    Regards,
    Badger

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    Rossguy's Avatar
    Join Date
    Jan 2008
    Last On
    06-29-2010 @ 09:30 AM
    Location
    Deep in Dixie- Extreme SE Tennessee
    Posts
    40
    Local Date
    03-19-2024
    Local Time
    02:43 AM
    Just imagine how many keystrokes would have been saved by posting two photos.... You only gave us part of the serial number. 796 over 1910 needs two letters just to the right of it as well- one of my 5*'s is 158 over 1910 BU . After the sequential numbering got to 999 over 1910 BU the next rifle would have been 1 over 1910 BV........clear? Any numbers on the bolt or the receiver are only assembly numbers.
    A jpeg would clear it up in a flash, but as these early "short" Ross rifles moved from one Batt'n to another and then to Cadet Corps, each Armourer would strike out previous ownerships, and add his. Just like a passport. Your rifle may have gone to Englandicon with Canadaicon's First Division when the war started in 1914 (not 1917) but they didn't go across the Channel to Franceicon-
    First Div carried shiny new MkIII Ross rifles. MkII's were used for training in England only then got shipped back to Canada.Is it currently in the US or Canada?

  6. #4
    Deceased May 2nd, 2020 Cosine26's Avatar
    Join Date
    Mar 2009
    Last On
    05-18-2020 @ 07:29 PM
    Location
    Cal
    Posts
    506
    Local Date
    03-19-2024
    Local Time
    02:43 AM
    Thread Starter

    Ross Rifle Mk II 5*

    I did not purposely omit the letters of the serial number; I just did not know that they were a part. Unfortunately the stock has dent there and I cannot read it in entirety. It is either “BV”, “PV” or “RV”. The dent occurs right where the loop of the “B” or the tail of the “R” would be. I have studied the area with a magnifying glass but the damage is too great to make a positive identification. The rifle does not have provisions for clip or charger slots; however it does still have the “cutoff” and the lifter for aid in loading.
    I tried to take pictures but could not get any to come out that that showed the detail s. I shall try again later and post them if I can get them to come out.
    Thanks for the input.

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    Rossguy's Avatar
    Join Date
    Jan 2008
    Last On
    06-29-2010 @ 09:30 AM
    Location
    Deep in Dixie- Extreme SE Tennessee
    Posts
    40
    Local Date
    03-19-2024
    Local Time
    02:43 AM
    The first letter could only be a "B"- The rifle is too late for an "A", and "P" or "R" are too late for even a 1918-assembled Mk III- my highest Mk III serial ever recorded is 433/1918 OX, and the rifle is clearly one of the "Make-up Run" assembled from left-overs long after the Ross Plant was effectively stolen by the Canadianicon Gov't from Sir Charles in early 1917. If you can either post a jpeg of the markings on the right side of the stock or E it to me directly, we can likely identify most or all of the previous owners.....

  8. #6
    Deceased May 2nd, 2020 Cosine26's Avatar
    Join Date
    Mar 2009
    Last On
    05-18-2020 @ 07:29 PM
    Location
    Cal
    Posts
    506
    Local Date
    03-19-2024
    Local Time
    02:43 AM
    Thread Starter

    Poss MkII 5* Pictures

    I have taken some pictures but must figure out how to get defused lighting. Everything looks good until I snap the picture then everything is 'washed out'. Will keep trying
    Thanks for the info



    Last edited by Badger; 03-09-2011 at 07:58 AM.

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    Armyphotog's Avatar
    Join Date
    Sep 2009
    Last On
    03-25-2010 @ 04:17 PM
    Posts
    7
    Local Date
    03-19-2024
    Local Time
    02:43 AM
    Quote Originally Posted by Cosine26 View Post
    Ross Rifle Mk II 5* (Part 1)
    A series of articles starting with “The ‘Stepchild’ Ross” by C.C. Meredith appearing in the November 1944 AMERICAN RIFLEMAN magazine and continuing through the ”Reviving the Ross” and “Ross Reversal” by G.H.V Stent in the April 1945 and May 1946 AMERICAN RIFLEMAN piqued my interest in the Ross Rifle. (These articles created quite a controversy in the “Dope Bag” section of the magazine for several months thereafter – both pro and con.) I had never seen one until I walked into a gun shop in New York and saw one leaning over in a corner. I recognized it by its distinct bolt handle shape and asked to examine it and was allowed to do so. I asked the price and the owner said $10. I offered him $5 and we compromised on $7.50. Neither of us could figure out where the serial number was located so the bill of sale simply says “One M1905 Ross Rifle”. From this page I now know how to identify the S/N.
    The rifle was only in fair condition. The stock was well used and bore several scars. The bore was/is dark but the rifling is sharp. I have fired the rifle and though it is not marked it does indeed have the large chamber. The cartridge case when extracted has very little neck left, the chamber is so large. The bolt face shows no indication of having been fired much. It is missing the hand guard between the receiver and the rear sight base.
    Ross Rifle Mk II 5* Part 2
    The description is as follows:
    LEFT SIDE OF RIFLE:
    1. On the left receiver wall is the annotation “Ross Rifle Co, Quebec Canadaicon 1905”. It looks to me as if the stamping was made after the receiver was hardened for it is very shallow.
    2. On the barrel there appears to be a pair of crossed flag. In the top opening of the pair is what appears to be a crown. In the bottom opening there appears to be a “P”. In the side openings are marks which I cannot decipher.
    3. Just below this there appears a crown and the letters “I” and “Q” running parallel with the bore with the crown on top.
    4. On the left side of the stock just behind the rear sight are the numbers “182” and “267”. The 182 is above the 267.
    5. On the left but stock just about where the rifleman would lay hs face the numbers are repeated only this time the 267 is above the 182.
    6. The stock has two cross bolts: one just even with the rear of the rear sight and the other just even with the front of the trigger guard.
    RIGHT SIDE OF RIFLE: Reading from the butt towards the muzzle there appears to be a series of marking which lie essentially in three columns.
    1. 60/80
    2. Below that A 13D (It looks as if someone had tried to strike over these with a common screw driver to obliterate them
    3. Two circles the larger being ¾ inch and the inner one being 3/16 inch. There is some sort of notation in the small circle but I cannot read it. Between the inner circle and the outer circle along the bottom of the larger circle appears the work “Quebec”.
    4. To the right of the circle towards the muzzle is the Notation “Roman Numeral II with a 5* above it. Further to the right is the notation “ (Underlined) 796 over 1910”. I take it that this is the S/N and the year of manufacture.
    5. Further to the right and in line with the first notation is the notation’ “6/15”
    6. Further to the right is the notation in capital letters “BMCD”. This had been “struck out” with the screw driver blade and directly beneath is the notation “CEF”. Below that is the notation: I 5” also struck out with the blade.
    Ross Rifle Mk II 5* (Part 3)
    The Sights:
    1. The rear leaf sight is marked at the top “Sutherland Rifle Sight Co, New Glascow N.S. and is really a wondrous thing. The rear of the leaf is marked: “ Pantd May 22 01, Apr 18 05 and May 21 07. The face is marked 6 to 19. I do not know the units.
    2. The slide contains an elevating screw, a lock screw and a windage adjustment screw. The windage part of the slide can be move right or left with an adjustment screw 25 units each calibrated in increments of 5. I do not know what the units are.
    3. Along the left side of the leaf are marks of 6/20/80/80 then a big “1”, followed by 20/40/60/80 and a big “2”. The slide is calibrated from 1 to 10 to act as a venire.
    4. The bolt is marked “51” on the bottom of the bolt handle rood and along the back is the “crossed flags followed by a crown and a “9”
    Ross Rifle Mk II 5* (Part 4)
    It is my conjecture that this is a Mk II 5* which made it to Franceicon with the CEF and was used for training. How it made it back to the US is a mystery. There are no markings ast would indicated that it served with the US Army. Some of my information come from “Sir Charles Ross and his Rifle” published by Museum Restoration Service, Ottawa Canada 1969. I would appreciate any comments.
    The 796/1910 is indeed the serial no., except there should be a letter or series of letters out to the side, which is also part of the serial no. They only numbered to 999 and then started over with another three digit series with a different letter designation. And, yes, it was mfg. in 1910 with the last of improvements as designated by the 5*.

    What kind of ammo did you shoot in it? It fires .303 Britishicon, and if it did that to the case, I suggest you refrain from shooting it. It apparently is not safe. You might part it out, and make more than your $7.50 investment.

  10. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    Rossguy's Avatar
    Join Date
    Jan 2008
    Last On
    06-29-2010 @ 09:30 AM
    Location
    Deep in Dixie- Extreme SE Tennessee
    Posts
    40
    Local Date
    03-19-2024
    Local Time
    02:43 AM
    As only one of the custodians of Sir Charles reputation, I must ask you politely : on what do you form your opinion that "it apparently is not safe"? Please don't troop out the old hairy chestnut about the bolt blowing back- that has long since been defined as an urban myth, and the few documented occasions that it did occur only with a 1910-series Ross, not a 1905, it was clearly the result of someone with little or no specific Ross knowledge and/or absolutely no mechanical knowledge or sympathy dismantling the bolt, then incorrectly reassembling it before firing...stupidity has it's own rewards, or as I look at it, it's further proof that God indeed does occasionally vacuum the terminally stupid from the bottom of the gene pool. With sensibly loaded ammunition, no problems except a possible lack of accuracy due to bore wear should occur.

  11. #9
    Legacy Member Cantom's Avatar
    Join Date
    Oct 2006
    Last On
    05-24-2021 @ 08:44 AM
    Location
    Ontario Canada
    Posts
    411
    Real Name
    Tom
    Local Date
    03-19-2024
    Local Time
    03:43 AM
    What kind of ammo did you shoot in it? It fires .303 Britishicon, and if it did that to the case, I suggest you refrain from shooting it. It apparently is not safe. You might part it out, and make more than your $7.50 investment.
    That is a complete fallacy. The 1905 is very strong and completely safe to shoot.
    Rossguy said it correctly. Only an incorrectly assembled bolt on a Mk III/1910 action was dangerous, assembled correctly they are extremely strong.

    The chambers were reamed out to make the rifles more reliable with out of spec British ammo, the fact that the case expands when fired is not dangerous or unsafe.

  12. #10
    FREE MEMBER
    NO Posting or PM's Allowed
    Juno63's Avatar
    Join Date
    May 2008
    Last On
    04-18-2011 @ 09:02 AM
    Posts
    2
    Local Date
    03-19-2024
    Local Time
    03:43 AM
    Assuming the correct end of the rifle is pointed down range

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. My Ross Rifle
    By Amatikulu in forum The Ross Rifle Knowledge Library Collectors Forum
    Replies: 9
    Last Post: 09-24-2009, 12:29 PM
  2. My new Ross Rifle Mk.III
    By Oatmeal Savage in forum The Restorer's Corner
    Replies: 45
    Last Post: 08-25-2009, 09:09 PM
  3. Ross Rifle
    By oldhound in forum The Restorer's Corner
    Replies: 8
    Last Post: 03-08-2009, 09:19 PM
  4. Ross rifle M10.....
    By Dante in forum The Ross Rifle Knowledge Library Collectors Forum
    Replies: 2
    Last Post: 03-03-2007, 11:45 AM
  5. Ross Rifle Company M10 Military Rifle - $950 (Cdn)
    By Badger in forum Commercial Auction and Sale "Gossip"
    Replies: 6
    Last Post: 01-08-2007, 02:57 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks