+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: Model 1903-A3 National Match - Need '03 Expert Help - More Pics

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member NMC_EXP's Avatar
    Join Date
    Mar 2009
    Last On
    01-06-2021 @ 06:59 PM
    Location
    U.S.A. - Colorado
    Posts
    73
    Local Date
    03-28-2024
    Local Time
    07:34 PM

    Question Model 1903-A3 National Match - Need '03 Expert Help - More Pics

    Greetings

    I purchased a 1903-A3 which had been modified as a match rifle. The obvious modifications consisted of the additions of: (1) a Redfield International rear sight on a base marked "WIN MOD 52", (2) a globe front sight, (3) polished follower, and (4) an aftermarket target stock. It still has a factory barrel on it, and the bolt is not polished.

    My intent was to use this as a match rifle - can't see a front post anymore - do not care for 'space guns' - I like the '03.

    After I brought it home I was surprised to find that depending on where the Redfield Olympic was positioned, either the bolt could not be operated or the stripper clip guide was blocked meaning the rifle cannot be used in across the course matches.

    This was not a big deal as I am no fan of the International sight. Decided to put a vintage Lyman on the right side of the receiver. I consulted Brophy to find out which type of Lyman 48 to look for.

    Another surprise on page 205 - Brophy discusses the aborted Model 1903-A3 National Match project. Aborted because the Redfield Intl sight either blocked the bolt or clip guide.

    Per Brophy 140 of these were made then sold thru DCM.

    If this is one of the 140, I do not want to drill & tap it for a Lyman.

    If it is not, I will put a Lyman on it and punch some paper, hopefully in the general vicinity of the black part.

    Any of you guys ever seen one of these things, and is there any way to determine if this is or is not one of the 140?

    Regards,

    Jim

    Attachment 14607Attachment 14614Attachment 14611Attachment 14608Attachment 14615Attachment 14605Attachment 14612Attachment 14609Attachment 14606Attachment 14613Attachment 14610
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by NMC_EXP; 08-02-2010 at 02:08 PM. Reason: Add photos
    “...successful rifle shooting on the range is nothing more than first finding a rifle and lot of ammunition which will do precisely the same thing shot after shot, and then developing the same skill in the rifleman.” ~ E. C. Crossman

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel Chuckindenver's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 12:38 PM
    Location
    Denver Co
    Age
    61
    Posts
    3,152
    Real Name
    chuck
    Local Date
    03-28-2024
    Local Time
    06:34 PM
    bolt should be marked NS, polished, and serialed to the rifle. should have a milled trigger guard, and floorplate, as well as follower,
    looks like someone has ground the reverse dove tail from the rear bridge, so any collectors value went away with the grinding....i dont think that one is one of the A3 NM rifles...
    more pics, and some of the sight,,,,and of the screws drilled for the sight would helpfull...military installation of the sight would be nice...grind marks ect..would be other then military imstall.
    warpath metal finishing contact info.
    molinenorski@msn.com
    720-841-1399 during normal bus, hours.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member NMC_EXP's Avatar
    Join Date
    Mar 2009
    Last On
    01-06-2021 @ 06:59 PM
    Location
    U.S.A. - Colorado
    Posts
    73
    Local Date
    03-28-2024
    Local Time
    07:34 PM
    Thread Starter
    I intend to post more photos tomorrow plus info on trigger guard & floorplate.

    Did the armory grind off the rear sight dovetail on the A3-NM rifles?

    I have never seen a good photo of an A3 NM much less the real thing.

    Based on the law of averages if nothing else, I am leaning towards this being a civilian modification which duplicated the armory screw-up or the owner did not care about using stripper clips.

    The current bolt not being polished makes me think civilian modification. Can't imagine why someone would swap out a slicked up bolt for a parkerized version but the bolt operates smooth as glass.

    Regards

    Jim
    “...successful rifle shooting on the range is nothing more than first finding a rifle and lot of ammunition which will do precisely the same thing shot after shot, and then developing the same skill in the rifleman.” ~ E. C. Crossman

  6. #4
    Advisory Panel Chuckindenver's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 12:38 PM
    Location
    Denver Co
    Age
    61
    Posts
    3,152
    Real Name
    chuck
    Local Date
    03-28-2024
    Local Time
    06:34 PM
    no, they would not have ground off the sight mounting dovetail..the real ones iv seen had early steel Palma Redfield sights, though close to what you have,..they are different.
    the 52 sight is a .22 cal rifle sight..the Palma sight used for the A3 NM is a high power long range sight.
    warpath metal finishing contact info.
    molinenorski@msn.com
    720-841-1399 during normal bus, hours.

  7. #5
    Legacy Member NMC_EXP's Avatar
    Join Date
    Mar 2009
    Last On
    01-06-2021 @ 06:59 PM
    Location
    U.S.A. - Colorado
    Posts
    73
    Local Date
    03-28-2024
    Local Time
    07:34 PM
    Thread Starter
    Quote Originally Posted by chuckindenver View Post
    no, they would not have ground off the sight mounting dovetail..the real ones iv seen had early steel Palma Redfield sights, though close to what you have,..they are different.
    the 52 sight is a .22 cal rifle sight..the Palma sight used for the A3 NM is a high power long range sight.
    I added more photos to my original post

    The rear sight base on this rifle is marked WIN 52 with an electric pencil.

    According to Brophy the 03-A3 Natl Match had the Redfield International rear sight. He did not mention the base.

    Whoever ground off the original rear sight base was a craftsman. Zero grind marks and apparently the receiver was re-parkerized afterwards. You can see a slightly different color where the original base was.

    The barrel is an RA 4-43. The barrel is smooth - no tool marks plus the Ordnance Shell is very faint. Barrel may have been polished and refinished. The barrel finish color is black. The receiver is grey-green parkerizing.

    The bolt and all the small parts are Remington. Floorplate, follower & trigger guard are forged.

    Regards

    Jim
    “...successful rifle shooting on the range is nothing more than first finding a rifle and lot of ammunition which will do precisely the same thing shot after shot, and then developing the same skill in the rifleman.” ~ E. C. Crossman

  8. #6
    Advisory Panel Chuckindenver's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 12:38 PM
    Location
    Denver Co
    Age
    61
    Posts
    3,152
    Real Name
    chuck
    Local Date
    03-28-2024
    Local Time
    06:34 PM
    hard to really say,., maybe someone has a SRS list that can see if its a hit...
    you could write redstone, and have them do a record search... im saying no...nice rifle...but not a 1903A3 NM...the ones iv seen, and one i held and drooled on,..had the reverse dovetail still on..
    all the barrels will be darker. they are much softer then the receiver.. anyone that does parkerizing could have refinised the metal..
    warpath metal finishing contact info.
    molinenorski@msn.com
    720-841-1399 during normal bus, hours.

  9. #7
    Legacy Member NMC_EXP's Avatar
    Join Date
    Mar 2009
    Last On
    01-06-2021 @ 06:59 PM
    Location
    U.S.A. - Colorado
    Posts
    73
    Local Date
    03-28-2024
    Local Time
    07:34 PM
    Thread Starter
    Quote Originally Posted by chuckindenver View Post
    hard to really say,., maybe someone has a SRS list that can see if its a hit...
    you could write redstone, and have them do a record search... im saying no...nice rifle...but not a 1903A3 NM...the ones iv seen, and one i held and drooled on,..had the reverse dovetail still on..
    all the barrels will be darker. they are much softer then the receiver.. anyone that does parkerizing could have refinised the metal..
    I could not find much info on 03-A3 NM on the web. One reference stated that the armory did not make a record of the serial #'s.

    You mentioned contacting Redstone - as in Redstone Arsenal or a member here called Redstone?

    I took a closer look at the photos in Brophy and you are correct - the rear sight base is still there. This rifle is a civilian modified piece.

    Guess I'll shop around for a Lyman 48, take it to a match and scare the heck out of the mouse gunners.

    Where did you find a real 03-A3 NM?
    “...successful rifle shooting on the range is nothing more than first finding a rifle and lot of ammunition which will do precisely the same thing shot after shot, and then developing the same skill in the rifleman.” ~ E. C. Crossman

  10. #8
    Advisory Panel Chuckindenver's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 12:38 PM
    Location
    Denver Co
    Age
    61
    Posts
    3,152
    Real Name
    chuck
    Local Date
    03-28-2024
    Local Time
    06:34 PM
    iv seen 3 actually, one at the Cody weapons museum, one at the Rockisland museum, and saw on FS at a local gunshow, got to hold that one..
    Redstone ars, has all the small arms info.
    warpath metal finishing contact info.
    molinenorski@msn.com
    720-841-1399 during normal bus, hours.

  11. #9
    Legacy Member NMC_EXP's Avatar
    Join Date
    Mar 2009
    Last On
    01-06-2021 @ 06:59 PM
    Location
    U.S.A. - Colorado
    Posts
    73
    Local Date
    03-28-2024
    Local Time
    07:34 PM
    Thread Starter
    Quote Originally Posted by chuckindenver View Post
    iv seen 3 actually, one at the Cody weapons museum, one at the Rockisland museum, and saw on FS at a local gunshow, got to hold that one..
    Redstone ars, has all the small arms info.
    I'm about 90 miles from Rock Island Arsenal. My brother's last command was headquartered at RIA. Went to the museum a couple of times when I visited him but did not have the chance to spend much time there.

    Thanks for all the info. The good news is I get to use the rifle rather than stashing it in the safe.

    Regards

    Jim
    “...successful rifle shooting on the range is nothing more than first finding a rifle and lot of ammunition which will do precisely the same thing shot after shot, and then developing the same skill in the rifleman.” ~ E. C. Crossman

  12. #10
    Legacy Member Calif-Steve's Avatar
    Join Date
    Mar 2009
    Last On
    10-01-2023 @ 12:52 AM
    Posts
    2,508
    Local Date
    03-28-2024
    Local Time
    07:34 PM
    Nice rifle. Not a true 03-A3 NM. But still a nice rifle.

  13. Thank You to Calif-Steve For This Useful Post:


+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. National Match, International Match? Need help!
    By 404tbang in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 16
    Last Post: 04-27-2010, 10:27 PM
  2. National Match?
    By frankie in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 3
    Last Post: 03-13-2010, 08:27 AM
  3. Price for a National Match 1903
    By epidoc in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 5
    Last Post: 10-21-2009, 04:37 PM
  4. National Match
    By fred_ex in forum M1 Garand/M14/M1A Rifles
    Replies: 7
    Last Post: 08-19-2009, 08:26 AM
  5. 6.09 SA National Match...
    By JAS in forum M1 Garand/M14/M1A Rifles
    Replies: 4
    Last Post: 04-19-2009, 12:33 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks