+ Reply to Thread
Results 1 to 6 of 6

Thread: Stevens 520-30 trench Shotgun Questions

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Valkyrie45's Avatar
    Join Date
    Apr 2009
    Last On
    02-19-2011 @ 08:29 PM
    Posts
    14
    Local Date
    03-28-2024
    Local Time
    10:02 AM

    Stevens 520-30 trench Shotgun Questions

    I have located nice looking 520-30 Trench shotgun and am considering purchasing it. I have looked at a lot of blogs and determined it is all correct with the proper markings and the barrel SN matches the Reciever's. It has a serial number of 58,XXX. I did not pull the stock off to check how it is marked but everything looks to be correct, EXCEPT!

    A Redfield peep sight is attached to the left side of the receiver. The sight is attached by a screw and the sight arm runs towards the back a short distance then turns up vertically and turns again horizontally and crosses directly behind the back side of the receiver. A peep sight is perfectly aligned down the top of the barrel to the bead on the heat shield. Could this be a military addition or was it added at some point since serving?

    How much does this devalue this peace of historyif any? It has at least 85 percent originl finish. The Heat Shield is a bright blue with the plum coloring at the bayonet lug portion. Any help determining the value of this Trench gun would be appreciated. Sorry, I don't have any photos to share.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member emmagee1917's Avatar
    Join Date
    Aug 2009
    Last On
    11-27-2022 @ 11:10 AM
    Location
    Yuma , Arizona
    Posts
    1,402
    Local Date
    03-28-2024
    Local Time
    08:02 AM
    Like most other guns , a threaded hole added to the reciever by Bubba gives the gun a big drop in price. Is the finish under the sight damaged with wear? Be hard to give a figure , but I would bet a good 20-25 percent price drop over one not fiddled with. Remember the addage about taking a $ 750 dollar gun and spending $500 dollars to turn it into a $250 gun .
    Chris

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    Valkyrie45's Avatar
    Join Date
    Apr 2009
    Last On
    02-19-2011 @ 08:29 PM
    Posts
    14
    Local Date
    03-28-2024
    Local Time
    10:02 AM
    Thread Starter
    I didn't take the sight off but would figure the finish is marred some from having the sight tight against it. He is asking 1350 for it. He thinks the sight is military and I didn't know wheather it was or not. I have very little experience with Military shotguns. All the ones I have seen for sale have been a lot rougher and ask incredible prices! When I saw the sight my heart sank! I had never seen one on a Trench gun before. This one looks really good and even appears to be of the period.

    I don't think he will take anything less, he feels the weapon is correct like it is. Everything else is so right, it is a shame someone added the sight! Just wondering what would be a fair price for it as it is.

    Thanks for your help.

  6. #4
    Legacy Member emmagee1917's Avatar
    Join Date
    Aug 2009
    Last On
    11-27-2022 @ 11:10 AM
    Location
    Yuma , Arizona
    Posts
    1,402
    Local Date
    03-28-2024
    Local Time
    08:02 AM
    Well , I paid $1000 for a 1897 all correct trench several years ago. It had been rebuilt to new and refinished. I bought it as a shooter and use it as such. There is a company taking used 520-30 non-militaries and adding fake heatshields and refinishing them ( no fake markings , though) and selling them for around $800. The price he's asking is upper endish , but fair. It will never be a collectable , but if you want a shooter go for it. Nothing wrong with buying what you want as long as you go in with your eyes open.
    Chris

  7. #5
    Legacy Member nhetzer's Avatar
    Join Date
    Mar 2009
    Last On
    01-14-2024 @ 10:38 PM
    Location
    Ohio
    Posts
    181
    Real Name
    Nick Hetzer
    Local Date
    03-28-2024
    Local Time
    10:02 AM
    If you just want a shooter and aren't concerned about it being a matching gun, you're better off looking elsewhere. The heat shield is the key here. You can get a barrel and a receiver for less than $500. A stock will run you about $60 for both pieces. They can indeed be found for that. I've bought plenty of them. The heat shield is rare part. If he has an original heat shield, then I say buy it and get another receiver. The heat shield alone could bring that price. They are crazy expensive when you can find them. Good luck with your decision.

  8. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    scosgt's Avatar
    Join Date
    Mar 2011
    Last On
    12-28-2016 @ 05:22 PM
    Location
    Valley Stream
    Posts
    70
    Local Date
    03-28-2024
    Local Time
    10:02 AM

    520-30

    The gun is ruined for collecting.

    IF the adaptor is nice and for real, but it and sell the gun as a shooter. Keep the adaptor. A good clean gun missing the adaptor will turn up. For the Stevens, adaptors are harder to find than guns.

+ Reply to Thread

Similar Threads

  1. Stevens 520-30 Trench Shotgun
    By ragman in forum Military Shotguns
    Replies: 13
    Last Post: 10-07-2010, 09:31 PM
  2. Stevens 620 Trench Gun questions
    By k98425 in forum Military Shotguns
    Replies: 4
    Last Post: 08-01-2010, 08:48 PM
  3. Stevens 620A Trench Gun questions!
    By gfguns in forum Military Shotguns
    Replies: 12
    Last Post: 12-27-2009, 11:40 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks