+ Reply to Thread
Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 50

Thread: New fixer-upper 1891 Carcano Cavalry Carbine

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    09:39 AM

    New fixer-upper 1891 Carcano Cavalry Carbine

    Found this yesterday and asked some advice on the advice forum and ended up picking it up today.

    Local gun shop find. Original price $249.95 which I figured was way too high. Did some looking around on Gunbroker and other places and with the advice received here figured it was a bit much for my tastes. But went back to look at it again today to get some more details on markings etc and during my inspection, the shop owner approached me and said he'd make a deal with me on it. It had been marked on sale for $229.95 which was still way too high. He said he'd take $175 for it, I countered with $160 and we made the deal.

    Looking at the photos I'm now wondering what I got myself into. Natural sunlight really draws attention to flaws that don't show up under indoor lighting.

    In any case, there is very little pitting on it despite the large amounts of surface rust. The bore is very good, nice and clean and the action and trigger work great. I have removed the stock from it and found no surprises underneath other than perhaps there is almost no rust at all under the stock. It just looks and feels like something that has sat in a garage through quite a few humid summers to me. Stock interior is a very light tan.

    I bought it as a project gun, I like cleaning these things up but usually it's mostly the stocks not this much metal. It has no import marks and the serial number on the barrel/receiver matches that on the stock.

    These are the before photos, hopefully by the time I'm done it will look a lot better.






    Terni manufacture, small "X" on the stock that I hadn't noticed before.


    I'm guessing the 36 is the year but the XIV confuses me.


    Small number 12, inspection mark or manufacturer mark?


    Small separated section of wood, should be easily repaired, nothing missing. "Nice" overspray on the stock adding to the sitting in the garage feeling.

    Nothing seems to be broken or missing that I can tell, the interior looks almost like new. If anyone can offer any information on it's markings, or advice on cleaning up the metal or wood I'd appreciate it. Wood I'm pretty good with but the metal is more extensive than I've done before.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by Aragorn243; 03-26-2011 at 02:50 PM.

  2. Thank You to Aragorn243 For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    onlycrimson's Avatar
    Join Date
    Jan 2011
    Last On
    11-18-2012 @ 02:22 PM
    Location
    MI
    Posts
    98
    Local Date
    03-28-2024
    Local Time
    08:39 AM
    Cool little gun that is on my list. If it's just surface rust you should be able handle it easily. Is there some wood missing on the hand guard by the rear sight? Nice score though!

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    09:39 AM
    Thread Starter
    No wood missing on the hand guard but there is a crack in it. What looks like missing wood is where the guard is carved out for the sight to flip down into. It has a fixed sight underneath the adjustable. The small crack has me a little concerned as the wood is so fine there. I figure I'll try to get the oil out before I glue it.

  7. #4
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    09:39 AM
    Thread Starter
    Found the cleaning rod. Intact and inside its storage area. Metal is cleaning up nicely so far. Getting ready to give the stock a first round of cleaning.

  8. #5
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-28-2024
    Local Time
    03:39 PM

    Carcano deciphered

    Aragorn, on another forum you wrote "It is a Turni, round barrel shank 36-XIV, has a 12 inside a circle stamped on the butt stock close to or part of the wrist. There is a 15 inside a circle on the bolt. Barrel also has what appears to be an AT stamped on it that is partially obscured by the wood and a few other non-letter markings near the wood line. Bayonet is marked F90."

    I am posting my answer here, so that readers can refer back to the photos on the previous post.


    You have an Italianicon Mannlicher-Carcano Type M91 d.c. (Modello 91 da cavalleria).
    Manufactured by Terni in 1936 - Fascist year XIV. Hence the marking 36-XIV.

    The crown itself is the acceptance mark, which had previously been applied alone. From 1930 on, R-E was added to distinguish army weapons from those belonging to fascist units.
    (R-E = Regio Esercito = royal army).

    AT is the 1936 barrel code for Terni.

    The small numbers in circles are inspection codes.

    F90 on the bayonet is probably a code for the manufacturer of the blade.

    Patrick


  9. The Following 4 Members Say Thank You to Patrick Chadwick For This Useful Post:


  10. #6
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    03-28-2024
    Local Time
    09:39 AM
    I think you did well!

    If you are careful it ought to clean up fine. Wood's nicer than expected. The worst area seems to be the rear sling metal, which is hardly critical.

  11. #7
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    09:39 AM
    Thread Starter
    I just finished cleaning up the rear sling metal. It came out alright. There is pitting on the outside of the metal of this real sling metal and on the outside metal at both screw holes of the magazine and the inside of the butt plate. All is hidden when the parts are installed so I'm just going to stabilize them and let them alone, they are plenty solid. The butt plate came out a lot better than I expected. Got the rust off and it still maintains a patina although a mottled one. That was the one obvious thing that was covered with heavy rust. Stock is going through it's second coat of the spray orange stuff. Lots of black came off the first time around.

    This is after preliminary cleaning:


  12. Thank You to Aragorn243 For This Useful Post:


  13. #8
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    09:39 AM
    Thread Starter
    I've had two days to work in this, probably spent a total of 8 hours on it. The stock was treated with two coatings of citris strip and two coatings of wood bleach on the rust stained areas, rubbed down with steel wool and given one coat of BLOicon. The cracks were glued, I did use the dreaded sandpaper on the butt stock crack repair.

    The metal was scraped with the flat edge of a screwdriver to knock the heavy rust off, wire brushed and lightly steel wooled. The magazine is showing some pitting but everything else cleaned up pretty well. I tried to take the same photos for comparison but this is with flash rather than sunlight as it is now getting dark here.

    Let me know what you think.

    Before:


    After:


    Before:


    After:


    Before:


    After:


    Before:


    After:


    I'm not done with it but was anxious to get it back together. Probably won't get much time to work on it again for a while. I want to go over it again very closely for rust that I may have missed.

  14. The Following 5 Members Say Thank You to Aragorn243 For This Useful Post:


  15. #9
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    03-28-2024
    Local Time
    09:39 AM
    Feeling better about your purchase now, Strider?

    As far as ammo goes, Norma's the worst, Prvi is a safe but not too accurate choice, and the Hornady is outstanding- IF your bore is in excellent shape. Hornady runs a larger dia. bullet- I like it, but it has stirred some controversy in the past. There's several older threads about ammo and such in this and the "ammunition and reloading" forum. An excellent old MKLicon article as well, I think.

    My little carbine is about the least accurate of my Carcanos, but the front sight's too close for good focus anymore. A younger fellow would probably do better. What's interesting to me is that all my fixed sight Carcanos have spot on combat zeroes!

    Military Surplus Collectors Forums

    More 6.5 Carcano fun coming!

    6.5 carcano
    Last edited by Badger; 03-28-2011 at 08:13 AM. Reason: Edited post to show link with description ....

  16. #10
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    09:39 AM
    Thread Starter
    Yes, I feel pretty comfortable with my purchase now. I figured the metal would clean up but you never really know for sure. I still have to find some clips before I plan on getting ammo for it. I've looked around and found several places that sell them so that shouldn't be too hard. I'm not in a rush to shoot it though.

    Slings appear to be a bit tougher. I found a couple of old ones for sale that don't look like they are correct, one on ebay looks more like a Chileanicon Mauser sling than a Carcano. There doesn't appear to be any repro slings out there either other than K98icon slings which various sources say were used on these. Finnishicon marked slings seem more common but this isn't a Finnish marked rifle so I don't really want to go with one of them.

+ Reply to Thread
Page 1 of 5 1 2 3 ... LastLast

Similar Threads

  1. Canadian Lee Enfield Cavalry Carbine
    By K31 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 8
    Last Post: 03-08-2011, 09:16 PM
  2. Lee Metford Cavalry Carbine Mk1
    By 8udr in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 11
    Last Post: 09-18-2010, 09:45 AM
  3. MH Cavalry Carbine Question
    By Bruce_in_Oz in forum Martini Henry Rifles
    Replies: 1
    Last Post: 04-19-2010, 05:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks