+ Reply to Thread
Results 1 to 1 of 1

Thread: XM15 retro

Click here to increase the font size Click here to reduce the font size
  1. #1
    Moderator
    (Edged Weapons Forum)
    sdh1911's Avatar
    Join Date
    Oct 2006
    Last On
    02-23-2016 @ 03:41 PM
    Location
    Stanhope, New Jersey
    Age
    67
    Posts
    927
    Local Date
    03-28-2024
    Local Time
    05:21 AM

    XM15 retro

    Being as how my little guys burnt the barrels of my last two AR's I figured I'd build one just for me. I took a Bushy XM 15, shortened the barrel 1 tread and re-cut the chamber to min spec, lapped the bolt, cleaned up the two stage trigger to a clean 3lbs break and then had to give some thought to sights, I always liked the Redfields palma and had one laying around so what the heck, a little milling and a few screws and bingo, backs done. I found a neat front sight at a local gunshow, so I mounted it on two hardened rods and fabricated a clamping block so I can adjust the sights according. I managed to set everything up so that at 100 yards my cheek fits exactly on the stock. I'll be taking it up to the range as soon as time permits. I keep you all posted regardless of how the test drive goes-SDH
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks