+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16

Thread: Nagant M1895's at Cabela's

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    08:35 AM

    Nagant M1895's at Cabela's

    Cabela's has a shipment of M1895 Nagants in at the moment for $149.00 with an imitation leather holster. I only looked at one and it looked in decent shape but was probably an arsenal refinish. The big drawback was a nasty looking large import marking. The one I looked at was dated 1941.

    I thought about picking one up but figured I'd research it a bit first, they have 18 of them in the Hamburg store.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    08:35 AM
    Thread Starter
    Did some looking around and from the looks of things $149 is a bit high for one of these right now although with shipping and FFL transfer fee it's probably break even. I may still get one as I can get it for free at Cabelas because of my points. Reviews seem to say it is a good reliable revolver that's main drawback is difficulty of getting ammunition. Cabela's has that too. Anyone have any quick advice on what to look for? Early years I saw, doubt they have any of them.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    03-28-2024
    Local Time
    08:35 AM
    I have yet to buy one, but it's mostly due to the refinish. If one turns up not redone, it'll probably come home with me.

    If you get one, a range report would be most interesting!

  6. #4
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    08:35 AM
    Thread Starter
    I did go back up today and picked one up. I asked the fellow to bring out as many as he could, he brought out three. First one out of the box was a 1932 Tula with a very nice bore and wood grips. #2 was a WWII Izhevsk with a dark bore and bad rifling and plastic grips. #3 was a WWII Izhevsk with good rifling but a dark bore and plastic grips. By this time I figured which one was going home but I asked him to bring out two more which he did. A second Tula WWII manufacture and another Izhevsk WWII manufacture with plastic grips and slightly pitted bores were what came out of that batch.

    So I now have a 1932 Tula with wood grips. Nice looking gun with the exception of the import mark which is very nasty. Seems to function nicely, grips look very nice and match. With the plastic grips, the portions they replace are the outer two but there is wood in the center as well which they left in place. The wood is a light reddish color and the plastic grips are dark brown. It has been refinished, the trigger guard is Izhevsk.

    They come with an imitation leather holster with leather straps, a leather lanyard, a two piece reversible screwdriver with wood handle and a cleaning rod.

    They now have no ammo in the store. I went to get a box and they were all gone. Had half a dozen on the shelf as of Thursday. They did pull the box out of the case for me which was three rounds short and knocked off $5 for it. The guy and I were both wondering where the three rounds went, possibly inside a sold revolver but the fellow that sold it to me was very paranoid about checking the cylinders so it wasn't him.

    My cost: $0.00 for the pistol and box of ammo. I love their rewards program, highly recommend it.
    Last edited by Aragorn243; 06-25-2011 at 07:16 PM.

  7. Thank You to Aragorn243 For This Useful Post:


  8. #5
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    08:35 AM
    Thread Starter
    And here it is:









    Seems to be a very protective holster. It has rings to hold the cleaning rod in place but no place for the screwdriver that I can find. Not sure what the little leather "box" is for, ammo perhaps, screwdriver will not fit in it.



    I don't know when I'll get to the range with it. I'm extremely slow at that. Trigger pull is a bit harsh as expected but not terrible like some imply. If you use it as a single action, it is much smoother. It has a weird feel to it when releasing the trigger because the cylinder moves back to the rear as you do that which is unusual. Examining the bores at Cabela's is not the easiest as they will not allow you to remove the cylinder. We experimented a bit and a piece of white paper in the cylinder gap and a bore light shined down from the muzzle lights it up pretty well, easy enough to view condition anyway.

  9. The Following 2 Members Say Thank You to Aragorn243 For This Useful Post:


  10. #6
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    08:35 AM
    Thread Starter
    I made it to the range today. Took the Nagant revolver and my Carcano carbine today.

    I want to preface this report stating that I have not fired a revolver of any type in approximately 30 years and do not often shoot semi-autos either but have never been a terrible shot when doing so. My last session on a range with a handgun was two years ago.

    My first group of seven shots was fired using single action with my hands braced on a rolled up blanket. Target was 25 yards and an 8.5x11 sheet of paper with a 1 1/2 inch bull in the center. Group size was about 6 inches, all low, six hit the paper and I assume the seventh was just below the bottom. I've never shot a handgun this way before in my life but figured it would be a bit more stable than offhand.

    My second group of seven shots was fired at a 2/3rds scale steel torso target (12"x20") at 25 yards offhand and using the double action. I hit the target all seven shots, my wife who was watching said they were all again low on the bottom half of the target.

    Ammunition was factory load prvi partizan FPJ bullet 6.35 g/98 gr

    I am extremely pleased with how this pistol operated and it's accuracy. With practice, I'm sure I can get that group size a bit more respectable. Trigger pull again is terrible for both single and double action but not bad enough to miss the kill zone on a man sized target at 25 yards.

    From my research into this, the factory loads are not anywhere near original military specs which probably explains why it shoots low. Handloading to mil spec will probably correct this.

    I had no misfires, no difficulties loading and of the 14 rounds fired, all but one case just slid out on it's own and the 14th just needed a slight nudge. I did not use the pistols rod on any of them. Spun the cylinder and they just fell out. My only major problem is that I badly, very badly, need to get new glasses. I had difficulty seeing the bull in the center of the paper and found myself simply aiming for the center of the paper. But that's me, not the gun.

    No cases had any deformities and the primers all looked good.

  11. Thank You to Aragorn243 For This Useful Post:


  12. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    Mohawk's Avatar
    Join Date
    Dec 2010
    Last On
    08-01-2011 @ 02:15 AM
    Location
    Western US
    Posts
    148
    Local Date
    03-28-2024
    Local Time
    05:35 AM
    Try .32 H&R Mag in it. You would be surprised how much more accurate it will become...Just My .02

  13. #8
    Legacy Member m4a3sherman's Avatar
    Join Date
    May 2011
    Last On
    10-09-2023 @ 11:29 PM
    Location
    Pacific Northwest
    Age
    35
    Posts
    254
    Real Name
    Ben
    Local Date
    03-28-2024
    Local Time
    07:35 AM
    I picked up two a few years back at a pawnshop (well I say I.... I was only 19). Either way they came with one of th aftermarket cylinders for .32 and we used that I think entirely. I've been told one can fire the .32 in the standard cylinder but your cases will bulge and stick. I've since sold the two revlovers but seeing how prices have gone up, I should have kept them- I paid )$160 for both in great shape and the cylinder converter. Ah... Good times.

    My biggest complaint was the the trigger pull but to be fair, I never took her down and polished the innards.

  14. #9
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    08:35 AM
    Thread Starter
    Not sure when it started but Cabela's has these on sale now for $119.99 for a savings of $30 off regular price. The sale lasts until the end of the month. It was not an advertised sale so it is possible it may go a bit longer.

    Having a Tula, decided to try to get a decent Izhevsk. Asked the fellow to bring a few out, he said he could bring out two but relented and brought out four. First one was a Tula, next two Izhevsk with badly pitted bores. Number four was a 1943r Izhevsk with a bright bore and no pitting. Unfortunately, instant check was down and I didn't have time to wait so it remains on layaway for now. Looks about the same overall condition as my Tula. Not sure when I'll go pick it up as it's an hour and a half round trip. Probably sooner rather than later. Again, my cost $0.00. Actually, my cost will be $0.01 as I owe them a penny. They won't hold a fully paid for item. Odd policy.

  15. #10
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    08:35 AM
    Thread Starter
    Picked it up last evening and cleaned it up a bit. Bore looks new, the few spots I had seen at Cabelas were fuzz like I expected. Is a 1944r not a 1943r. Condition near identical to the Tula. Did not get a lanyard with this one. May try to find a set of plastic grips for it. Cylinder serial matches the receiver. Haven't taken it apart yet to check the other numbers. It is a rebuild so I expect some force matching. Has a Tula hammer and a few other Tula parts.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Nagant 91/30
    By douglass in forum The Restorer's Corner
    Replies: 15
    Last Post: 05-01-2011, 02:18 PM
  2. M28 Mosin Nagant
    By ernie w in forum Soviet Bloc Rifles
    Replies: 4
    Last Post: 01-10-2011, 01:31 PM
  3. My little trip down to Cabela's
    By spinecracker in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 08-03-2009, 02:12 PM
  4. nagant
    By yoeri in forum Ammunition and Reloading for Old Milsurps
    Replies: 2
    Last Post: 05-17-2009, 07:03 AM
  5. Nagant Sniper
    By gunasauras in forum Milsurps General Discussion Forum
    Replies: 14
    Last Post: 01-03-2007, 08:37 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks