+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: 1918 holster

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Hoss's Avatar
    Join Date
    Sep 2011
    Last On
    01-04-2020 @ 04:35 PM
    Location
    Texas
    Posts
    39
    Local Date
    03-28-2024
    Local Time
    03:16 AM

    1918 holster

    I have an old flap holster my wife inherited along with a US&S 1911 (and a few other pieces).

    The back says Warren Leather Goods Co 1918 J.A.O.

    First thought was that it was for the 1911, but it flat out didn't fit so I figured it must be for something else. Poking around on the internet tonight, it looks like it might be a WW1 era holster for a 1911. So if that's right, why doesn't the US&S fit? I literally shoved the gun in as far as I could and still had to wrestle with the flap to get it closed. Then when I pull it out, its harder to get out than it was to get in and lots of shavings come out with the gun. I want to get a military holster for that pistol, are they all going to be that tight?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    01:16 AM
    Is it a revolver holster? Give us a pic. Have a look here and see if you see it...45 auto,38 revolver,45revolver

    I guess the center one's a red herring. How bout the outside two?
    Regards, Jim

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    Hoss's Avatar
    Join Date
    Sep 2011
    Last On
    01-04-2020 @ 04:35 PM
    Location
    Texas
    Posts
    39
    Local Date
    03-28-2024
    Local Time
    03:16 AM
    Thread Starter
    I'd say the first one for sure. Here are a couple of pics, I hope they display well enough. I don't see a quick upload feature, so I'll just do them as attachments.

  6. #4
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    01:16 AM
    Oh sure, that's a nice WW1 Warren Leather Goods 1916 pattern holster for the 1911 or A1. It probably needs some leather dressing to soften it and the gun will go in easier. I had a Gratton & Knight WW1 that was scummy and gross and made grinding noises when I put the gun in and out. It was scratching my .45. I threw it in the washing machine with my work clothes and it was completely clean when finished. I put the gun in to pop out the dents and set it up to dry for some time. After dry, I applied Dubbin and kept adding until it was saturated. Nice and supple and soft for years after. No more grinding. Now, maybe that's a bit radical but they were meant to go through all kinds of weather and conditions and it DID sort it out. You may need some leather dressing to fix yours.
    Regards, Jim

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    Hoss's Avatar
    Join Date
    Sep 2011
    Last On
    01-04-2020 @ 04:35 PM
    Location
    Texas
    Posts
    39
    Local Date
    03-28-2024
    Local Time
    03:16 AM
    Thread Starter
    Would the washing machine treatment get rid of the corrosion or make it worse? the shavings that came out with the gun were colored green, which makes me not want to use the holster at all unless there's a way to clean it out.

  8. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    Johnny Peppers's Avatar
    Join Date
    Mar 2009
    Last On
    05-01-2015 @ 11:25 PM
    Posts
    1,810
    Local Date
    03-28-2024
    Local Time
    03:16 AM
    The green growth is verdigris, and is the result of the tannic acid in the leather reacting with the copper rivets. If you wipe it off and it get into the leather it is very hard to remove, so the best method of removing it I have found is to remove it with something like a toothpick that will not scratch the leather. Also, the verdigris is poison, so be careful in removing it.
    I treat my leather holsters with Pecards, and coating the area where the verdigris is growing with Pecards and letting it set for a few days helps in the removal.

  9. #7
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    01:16 AM
    What Johnny says is true, I said what I DID was to wash it. This Pecards is widly used and accepted as the proper thing. I too have sat with a toothpick removing the verdigris from between leather sandwiched in by fittings. Like the back at the M1910 hook, or the eyelet at the bottom.
    Regards, Jim

  10. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    Johnny Peppers's Avatar
    Join Date
    Mar 2009
    Last On
    05-01-2015 @ 11:25 PM
    Posts
    1,810
    Local Date
    03-28-2024
    Local Time
    03:16 AM
    Some holsters and slings really produce a lot of the verdigris while others produce little. I suppose it has to do with the amount of tannic acid left in the leather from the tanning process, but I have holsters that the verdigris has pushed the washer off the rivet. Model 1907 rifle slings are another source of verdigris as brass was used up until WWII, and the verdigris will grow around the brass frogs or hooks and where the D rings are sewn in.

  11. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    Hoss's Avatar
    Join Date
    Sep 2011
    Last On
    01-04-2020 @ 04:35 PM
    Location
    Texas
    Posts
    39
    Local Date
    03-28-2024
    Local Time
    03:16 AM
    Thread Starter
    Nasty. I think I'm most worried about the junk that's inside though. Don't see a way to reach it unless I take the stitches apart. Even if I was good with my hands, that would seem like a bad idea.

  12. #10
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    01:16 AM
    Why not try a toothbrush inside?
    Regards, Jim

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Holster ID - Help!
    By former173rd in forum Vintage Military Gear
    Replies: 18
    Last Post: 10-05-2011, 03:02 AM
  2. 1918 Graton & Knight Holster - Information needed.
    By jed1177 in forum Other Military Service Pistols and Revolvers
    Replies: 2
    Last Post: 01-29-2011, 09:19 PM
  3. Holster mfg.
    By pdh in forum The Watering Hole OT (Off Topic) Forum
    Replies: 1
    Last Post: 01-09-2011, 02:59 AM
  4. Colt 1918 holster
    By onthos in forum 1911/1911A1 Service Pistol
    Replies: 1
    Last Post: 11-07-2010, 01:52 PM
  5. 45 holster
    By rice 123 in forum 1911/1911A1 Service Pistol
    Replies: 10
    Last Post: 09-01-2009, 01:15 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks