+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: Questions on the M1896 Swedish Mauser

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    RogerD's Avatar
    Join Date
    Nov 2011
    Last On
    08-25-2013 @ 04:43 PM
    Location
    The Wild West
    Posts
    20
    Local Date
    03-28-2024
    Local Time
    07:44 AM

    Questions on the M1896 Swedish Mauser

    Hi again, I come baring questions that need answers.

    Firstly, I've recently bought a M/96 Swedishicon Mauser in relatively good condition for the holidays. The bore/barrel and everything is perfect, as it tells me on the little disk. (Neither the 1, 2, or 3 are marked saying otherwise.) The stock is of course a bit worn, with some dings and dents here, but no chipping or slivered parts at all. For the most part, the butt plate, bolt and receiver all match, and the only things that don't are the magazine plate and rings. It's one of the later ones, made in the 1920s.

    But as I look over some of the metal, I've found some factory marks (or I think they're factory), I'm not familiar with and haven't found any sites or anything that can help me decipher what they mean and where they came from. The first is a "T", on the front sight that I have no clue what it means, and on the receiver, just before the serial number there's a "HA" I have no clue what it means. Does anyone know what the "T" and "HA" stand for/mean?

    Also I was wondering what were some ammunition companies that make the 6.5x55 Swede, for a relatively cheap price, but are still good range shooting ammo? I've found Prvi Partizan makes a 139gr 6.5 Swede (which if I'm not mistaken the Swedish Army had their bullets at 143gr and I always like to buy the bullets that are closest to the military type), and that they are a good ammunition company. But I was just wondering if there were any others that were just as good or better? I'm not looking for any hunting rounds, just some range bullets (preferably FMJ) that I can buy for between $10-20 USD.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    gulliver62's Avatar
    Join Date
    Dec 2009
    Last On
    01-10-2013 @ 08:48 PM
    Location
    Atlanta, GA
    Posts
    71
    Local Date
    03-28-2024
    Local Time
    08:44 AM
    Are you sure that it is an HA and not an SA in a box? If it was an SA it would be a Finnishicon use Swede. I will try to get pics of mine so you can see.
    Also, the Privi is fine ammunition and the brass is excellent to reload.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    RogerD's Avatar
    Join Date
    Nov 2011
    Last On
    08-25-2013 @ 04:43 PM
    Location
    The Wild West
    Posts
    20
    Local Date
    03-28-2024
    Local Time
    07:44 AM
    Thread Starter
    Yes, it is indeed HA, not SA. I've seen SA on another rifle, Mosin-Nagants, that were Finnishicon captures at some point which has the SA, but my Swedishicon Mauser has HA.

  6. #4
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-28-2024
    Local Time
    03:44 PM

    HA = Frans Harald Andreasson

    HA in front of the number on the receiver is the mark of Frans Harald Andreasson, Captain in the 7th Artillery Regiment and inspection officer at the Carl Gustaf factory officer from Oct. 1. 1920 to Sep. 31. 1923


    Patrick

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    buffdog's Avatar
    Join Date
    Apr 2008
    Last On
    12-02-2013 @ 11:01 AM
    Location
    Manitoba, Canada
    Posts
    191
    Local Date
    03-28-2024
    Local Time
    07:44 AM

    Swedish Mausers

    Your rifle is a m/96 Swedishicon Mauser. The "T" on the front sight signifies that the front sight was changed to a height so that the m/41 spitzer cartridge would be compatable with the sights. The m/94 cartridge was a round nose, 156 grain bullet while the m/41 was a spitzer 139 grain bullet.

    Stock disk markings are to be taken with a grain of salt. New unmarked ones are available readily on e-bay. The only thing a stock disk tells you is that the rifle, when last inspected, had the condition as noted on the disk. It could have a thousand rounds fired after the last inspection, so you should always go by looking at the bore with the Mark I Eyeball.

    If you take the front and middle band off, (press down on the retainers and shove them toward the muzzle), and undo the two receiver screws, the action will come out of the stock. You have to raise the rear sight, and turn the top handguard 90 degrees. There should be a number on both the stock and the handguard that matches the receiver and bolt numbers.

    I would advise you against altering or sporterizing this rifle. The production during the 1920s is relatively small, with 8229 in 1920, 5195 in 1921, 5112 in 1922 and 4655 in 1923, the period that Frans Harald Andreasson would have been the Besiktningsofficer at Carl Gustafs, and any alterations will devalue the rifle considerably.

    On the bottom of the stock, at the wrist area, behind the trigger guard should be some stampings. One or two Crowns, and possibly some more like a Crown S. With the "T" marking on the sight, the rifle has been into the Arsenal at least once.

    What is the barrel length? The m/96 has a barrel length of approximately 29 inches. Some of the m/96 rifles were converted to the m/38 pattern with a barrel oapproximately 24 inches long.

    Are there two holes drilled in the receiver, for mounting a target diopter sight?

    Give us a bit more information and we can help you further.
    .

  8. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    RogerD's Avatar
    Join Date
    Nov 2011
    Last On
    08-25-2013 @ 04:43 PM
    Location
    The Wild West
    Posts
    20
    Local Date
    03-28-2024
    Local Time
    07:44 AM
    Thread Starter
    Thanks for all the information Buffdog, and Patrick, for the information. It's interesting to know that the "HA" is an inspector's initials. Does this increase the rifle's original 200 dollar range price, being who it is? Not that it's a big thing for me, I don't plan on selling this rifle at all in the near future, but it would just be an interesting little note of history on the rifle. Also, is there anymore info on this Harald Andreasson? How big of an inspector was he at the Carl Gustav factory?

    And now that I know how many were made in the 20s, I'm curious on how many they also made in 1918? The reason I ask, is because before I bought my 20s M/96, I was looking at a 1918 (not thinking of really buying it), and it seemed to be in pretty good condition for being nearly 100 year old rifle, just like the one I have, but it looked re-crowned and looked to have been sanded down by it's previous owner. I have no intention of sporterizing or altering the shape of this rifle. I may have got it for a good price, but I've never sporterized any of my relic rifles, they've all come as they were given. The dents and dings are pieces of history in my eyes/mind, and they can stay there as long as they like. My rifle also has the two crowns behind the trigger guard, but no "T". The two crowns are both a bit worn from ware of holding it there though, so they're not too easy to make out.

    Also, the barrel is the full 29", so I take it to be from what I've found on another site, to be just your standard M/96b (with the threaded barrel and "barrel cap" <--- is that what you'd call it?) There are no holes drilled into the receiver, or anything for a scope or target sights, just the typical thumb groove on the left side for obviously your thumb when you press the rounds down with a stripper clip.

    As for more info, that's all I really have. The bolt needs to have some cleaning, not just field stripped cleaning, but some exterior cleaning to get some grime off (that doesn't seem to hurt anything by itself, but it just looks a bit too dirty.) The wood looks to be a walnut, but from what I've read it could be another hardwood used by the Swedes? I'm pretty sure it's walnut though, seeing how dark it is and having experience with that type of wood before.

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    buffdog's Avatar
    Join Date
    Apr 2008
    Last On
    12-02-2013 @ 11:01 AM
    Location
    Manitoba, Canada
    Posts
    191
    Local Date
    03-28-2024
    Local Time
    07:44 AM

    m/96 Mauser

    There seems to be very little added value to these rifles depending upon who the Inspecting Officer was. Of course, some advanced collectors specialize on having a rifle for each year of production, and there are possibly some who want a rifle with each Inspection Officers initials on it.

    The first Crown on the wrist mean that the rifle was accepted by the Swedishicon Military and the second plain crown indicates it was fired for accuracy. Is there any Alphabetical Letter under the Crowns (such as a Crown over an S)? You indicate that the barrel has been threaded. This is known as a "B" type barrel and was done after 1955 for the purpose of attaching a Blank Firing Attachment for training. The Swedes used wooden bullets for blanks, and this attachment splintered the wooden bullet when fired so that no injuries would happen.

    This "B" type barrel on your rifle could be a replacement barrel done at an Armoury or Factory, or the original barrel threaded. Either way, there should be a marking under the wrist of the stock to indicate the location where the work was done. It is a bit of a puzzle as there is no indication of this work being done.

    It is possible that the stock is not the original one, and has been replaced. Although there was still some Walnut used after 1914, most of the stocks were Beech. Again, the only way to be sure is to take the barrel and receiver off the stock, and check to see if the receiver serial number is the same as the number on the wood stock and handguard. My previous post tells you how to do this.

    In 1918, there were 15,889 m/96 rifles made. A rifle with the wood sanded loses much of it's collectors value. Generally you can tell a refinished rifle because the wood at the finger grooves is rounded and not sharp, and the wood where it is fitted to the metal is even with or below the metal parts. Original wood stands "proud" above the metal fittings.

    .
    Last edited by buffdog; 12-15-2011 at 03:30 PM.

  10. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    RogerD's Avatar
    Join Date
    Nov 2011
    Last On
    08-25-2013 @ 04:43 PM
    Location
    The Wild West
    Posts
    20
    Local Date
    03-28-2024
    Local Time
    07:44 AM
    Thread Starter
    Yeah, my mistake on the stock identification, it's not Walnut like I thought, but Copper Beech (which I didn't even know there was such thing). Also, I found on the other side of the blade sight, opposite the T, a marking of +0.5 that is on it. I take this to indicate it shoots a little high, but not too high? And as for the two crowns on the wrist, they're kind of worn from having been gripped there so many times, that they're kind of hard to make out now. There's no alphabetical lettering that I can see, but what does it mean if it does? The the other Swedishicon Mauser I checked out (the 1918 one), had a letter I think?

    Also, it doesn't look like my stock's been sanded (or at least too much) as most of the wood does still stand above parts of the metal. And how many Inspection Officers were there at Carl Gustafs plant? What are their initials?

  11. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    buffdog's Avatar
    Join Date
    Apr 2008
    Last On
    12-02-2013 @ 11:01 AM
    Location
    Manitoba, Canada
    Posts
    191
    Local Date
    03-28-2024
    Local Time
    07:44 AM

    Inspection Officers

    .
    There were 16 assigned Inspection Officers from 1894 to 1946 plus 5 other Inspection Officers plus 10 Inspector Armourers.Now I can see where this one is heading. The next request will be for the Names and history of service of all these 31 people, and for someone to spend a couple of hours providing that when you can research it for yourself is a bit too much to ask.

    So, instead, I will provide you with a valuable lesson on research. You have to know where to find answers to questions such as you asked. If you are really interested and want to learn more on your subject, you have to obtain written, factual information, and this is a good time to start building a Library for yourself.

    To learn about the Swedishicon Mauser rifles, I would suggest you buy a copy of the book "Crown Jewels" by Dana Jones. It is about $50 but if you are serious about Gun Collecting, a good reference library is a must and books are worth it for the information that they can provide.

    -------------------------------------------------------------------------------------------------------

    The first Crown nearest the trigger guard is a Military Acceptance mark. The second one indicates the rifle was fired for accuracy (and zeroed with the front sight,) when accepted.

    Rifles were inspected on a regular basis in Sweden, either by an Armoury such as Carl Gustafs (Crown C",) or a Tygstation (Inspection and Repair Depot or Workshop) such as Stockholm (Crown S), Tygstation A4 at Ostersund (Crown O) or others. There were eleven such Tygstations in Sweden. Each time a rifle was inspected, repaired or modified, it was stamped on the wrist if the repair/modification/inspection was of a major nature. An armourer could put a small punch mark on the trigger guard when a rifle was looked at for a minor problem.

    .

  12. #10
    FREE MEMBER
    NO Posting or PM's Allowed
    gunner's Avatar
    Join Date
    May 2009
    Last On
    09-02-2018 @ 08:20 AM
    Location
    Bavaria, Germany
    Posts
    1,657
    Local Date
    03-28-2024
    Local Time
    01:44 PM
    HA was a inspector from 1921 to 1923 and that means your rifle should be in the SNr- range from 494147 up to 503960 and it should have a beech wood stock. The Crown with the letters atop of the breech is standard other than a crown over an C an a two digit number at the left side of the breech. This woud mean that the rifle was converted into a Matchrifle m/63 and the number means the year of the conversion.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Swedish Mauser M1896 M96 1915 (Carl Gustafs)
    By Oh-Six in forum Mauser Rifles
    Replies: 4
    Last Post: 10-09-2011, 12:21 AM
  2. M38 Swedish Mauser
    By xa-coupe in forum Mauser Rifles
    Replies: 13
    Last Post: 07-15-2011, 03:50 AM
  3. 1938 Model Turkish Mauser - questions, questions...
    By spinecracker in forum Mauser Rifles
    Replies: 1
    Last Post: 08-28-2010, 10:46 PM
  4. Swedish Mauser
    By MORB in forum Mauser Rifles
    Replies: 9
    Last Post: 10-31-2009, 09:17 PM
  5. 1896 Swedish Mauser 6.5x55mm (Mfg by Mauser Werk Oberndorf) (CGN Private Ad)
    By Badger in forum Appraisals, Fakery, Dispute Resolution & Mediation Forum
    Replies: 1
    Last Post: 10-03-2007, 07:35 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks