+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 20

Thread: Newbie needs ammo advice / help ?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Member Roofuss's Avatar
    Join Date
    Nov 2011
    Last On
    11-12-2012 @ 04:44 AM
    Location
    central Arizona mountains
    Age
    63
    Posts
    20
    Local Date
    05-19-2013
    Local Time
    12:01 PM

    Newbie needs ammo advice / help ?

    I just purchased my very first 1903A3 Remington rifle with a 2 groove 2-44 dated barrel . I want to eventually reload for this rifle, but for right now, would like to find some "over the counter " 30-06 ammo just to try out the rifle to see just what exactly I have . Any ideas or suggestions on what would be a good choice ? I currently reload for several pistol & rifle calibers, but .30-06 is not one of them, so I will have to get dies, etc. to do so. Should I slug the barrel for the correct bullet size or .....?



    I'm a newbie in the military arms hobby, so please excuse my being a bit ignorant in this area Thanks !!

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    Expert gunsmithing, marksmanship training and equipment for Police, Military and Security personnel as well as for competition marksmen and hunters. William J. Ricca Surplus Sales - Dealer in U.S. parts and accessories Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Chuck in Denver ... Buy-Sell-Trade .. Guns, Cars Motorcycles Service Publications - Collectors books that earn their place in your library! Quartermaster Stores Classifieds - Click HERE to Buy & Sell Banner AD Space Available - Click HERE to Inquire Milsurps Talk Radio (Click to Listen) … Collector talk, military music & more …..
     

  3. #2
    Really Senior Member LeagleEagle's Avatar
    Join Date
    May 2009
    Last On
    11-17-2012 @ 10:46 PM
    Location
    Texas
    Posts
    407
    Local Date
    05-19-2013
    Local Time
    01:01 PM
    Best deal would be to join the CMPicon, they have Greek M2 ball at about .50 a round. Cheapest going these days. This is pretty good stuff too:
    http://www.ammunitiontogo.com/produc...acturers_id/26
    Last edited by LeagleEagle; 12-25-2011 at 11:07 PM.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 08:34 PM
    Location
    Victoria BC
    Posts
    4,271
    Local Date
    05-19-2013
    Local Time
    10:01 AM
    Loading for 30 cal isn't brain surgery but you're going to need correct info. Don't take second hand information from sites, instead buy at least three big name ammo manufacturer reloading data books and read all you can find about the cartridge you want to load. Then you will have a far better idea then the opinions offered. I've loaded hundreds of thousands of rounds and probably one third was .30 cal for use in M1icon, 1903, Johnson rifle, BAR and 1919A4. I wouldn't follow unproven information from the internet. The loads you get and the recommendations in the publications are the right direction to go.

    By the way, Leagleagle is right. CMPicon is probably cheapest for anyone in the US.
    Regards, Jim

  6. #4
    Member Roofuss's Avatar
    Join Date
    Nov 2011
    Last On
    11-12-2012 @ 04:44 AM
    Location
    central Arizona mountains
    Age
    63
    Posts
    20
    Local Date
    05-19-2013
    Local Time
    12:01 PM
    Thread Starter
    Jim & LeagleEagle : Thanks for the heads up on CMPicon .

    I do have several reloading books on hand, and as I said, I already reload, just not this particular caliber. My work schedule involves long & odd { sometimes 14 hr. } days, so free time is valuable to me . Right now, I 'm just looking for some "over the counter ammo", I could shoot right away to try the rifle out, that's all . I have never reloaded 30-06, so I'll need to spend the time & $$ in getting all the ingredients . Since I do not have the capability to do my own casting, I need to also look into bullet possibilities as well. Hope this might explain things a little better ?
    I am going to check out CMP, but if there are any other idea's .....I'll gladly welcome them, and thanks in advance

  7. #5
    Senior Member mannparks's Avatar
    Join Date
    Sep 2011
    Last On
    05-16-2013 @ 08:50 AM
    Location
    IOWA
    Posts
    164
    Local Date
    05-19-2013
    Local Time
    12:01 PM
    rufess,if this is the first rifle cartridge you will be loading for ,the 30-06 is no dought the most widley loaded cartridge out there,the loading data is vast just go slow and easy . the loading manual you have should have loads for your springfield.
    if you have loaded sucsessfuly for handgun your foot is in the door.---charles

  8. #6
    Member Roofuss's Avatar
    Join Date
    Nov 2011
    Last On
    11-12-2012 @ 04:44 AM
    Location
    central Arizona mountains
    Age
    63
    Posts
    20
    Local Date
    05-19-2013
    Local Time
    12:01 PM
    Thread Starter
    Understood, but am looking for some cheap over the counter ammo to shoot right now, and will reload after I get all my stuff together .

    I checked into CMPicon, all I could find is Prvi Partizan 180 gr. or Golden Bear 145 gr. FMJ . I found NO M2 ball / military surplus ammo in 30-06 listed at all . What am I doing wrong ?


  9. #7
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 08:34 PM
    Location
    Victoria BC
    Posts
    4,271
    Local Date
    05-19-2013
    Local Time
    10:01 AM
    With over counter stuff, you could use practicly anything except the light magnum or ultra high velocity stuff. Factory ammo is within spec and will shoot to point of aim. Stick to the 150 gr and there should be no major group differences.
    Regards, Jim

  10. #8
    Member Roofuss's Avatar
    Join Date
    Nov 2011
    Last On
    11-12-2012 @ 04:44 AM
    Location
    central Arizona mountains
    Age
    63
    Posts
    20
    Local Date
    05-19-2013
    Local Time
    12:01 PM
    Thread Starter
    Thanks Jim, that's what I was looking for !! I will look { CMPicon, or ? } into getting some cheap 150gr. ammo for right now just to try the rifle out.

    I am awaiting the sellers load data and any other info regarding the ammo he used in the past with this rifle, as my starting point, but he is currently out of town for the holidays . Again, thanks Jim

  11. #9
    Senior Member daveboy's Avatar
    Join Date
    May 2009
    Last On
    05-06-2013 @ 09:28 PM
    Location
    Alabama
    Posts
    117
    Local Date
    05-19-2013
    Local Time
    12:01 PM
    Sounds like you were looking at something other than the CMPicon site. I've never heard of them selling Privi or Golden Bear ammo. Anyway, I believe they only sell in pretty large lots. So, if you will eventually be reloading for it you might not want that much. Basically, any 150 grain ammo from the major manufacturers should work just fine

    You should not need to slug the barrel, barrels made as late as yours and in good condition should shoot .308" bullets.

    daveboy

  12. #10
    Member Roofuss's Avatar
    Join Date
    Nov 2011
    Last On
    11-12-2012 @ 04:44 AM
    Location
    central Arizona mountains
    Age
    63
    Posts
    20
    Local Date
    05-19-2013
    Local Time
    12:01 PM
    Thread Starter
    daveboy : My mistake, I went to the link that LeageEagle had posted earlier in the thread , turned out to be Ammo to Go , sorry , had a case of " Head up my Butt "

    ---------- Post added at 05:53 PM ---------- Previous post was at 05:46 PM ----------

    Haaaa ! Now we're cookin' !!

    CMPicon has 200 rnds. of M2 Greek HXP ammo loose in the can for $98.00 !!

    Thanks for the help, much appreciated !!

    ---------- Post added at 05:59 PM ---------- Previous post was at 05:53 PM ----------

    You should not need to slug the barrel, barrels made as late as yours and in good condition should shoot .308" bullets.

    daveboy

    Ok, but just so I have the info on hand, should I ever need it.... I have asked the previous owner for any / all data he might have . He is out of town for the holiday at present .
    He has owned & shot the rifle for many years and did reload for it , so I figure anything will help . Once again, thank you !! I am a newbie to this particular sight , and after just a short time ....I am impressed

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Need Advice on Garand Ammo
    By rocky47 in forum Ammunition and Reloading for Old Milsurps
    Replies: 6
    Last Post: 09-15-2011, 12:49 PM
  2. Newbie Needs Advice on M1 Carbine Rear Sight
    By AnnieO in forum M1/M2 Carbine
    Replies: 34
    Last Post: 08-26-2011, 04:02 PM
  3. Other advice on n4 bedding...I'm a newbie. Mr Laidler tell me the truth..
    By bow in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 12
    Last Post: 06-13-2011, 02:53 AM
  4. Newbie asks for advice
    By marlin in forum Ammunition and Reloading for Old Milsurps
    Replies: 6
    Last Post: 08-01-2010, 12:13 PM
  5. Newbie Needs Advice On 1927 Lithgow No.1 MKIII Rifle
    By traindriver in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 4
    Last Post: 07-24-2010, 06:36 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts