-
FREE MEMBER
NO Posting or PM's Allowed
No. 1 Mk. III* extractor problem
Hello,
I recently acquired a 1918 Lithgow No. 1 Mk. III*, I can post pictures of all of it at another time, but I noticed a problem with the extractor: I can move around the claw with ease, I showed it in the photos. The positions pictured are the extremes of movement, I can position it anywhere in between. What parts and/or work is required to rectify this?
Thanks,
Jim
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
03-07-2012 07:30 PM
# ADS
Friends and Sponsors
-
Legacy Member
you could be missing the extractor spring ?
-
-
-
FREE MEMBER
NO Posting or PM's Allowed
Thanks for the quick reply! Sorry, I do not really know what I need to look for, how can I check for that?
-
Advisory Panel
There's no spring tension on the extractor. I can't see the spring in the picture. It's either broken or missing.
-
Thank You to Brian Dick For This Useful Post:
-
Legacy Member
-
-
Legacy Member
Spring is either broken, missing or very weak.
-
-
Advisory Panel
When you get it be careful putting it in, I've had them break just going back in place...
-