+ Reply to Thread
Results 1 to 7 of 7

Thread: Utica M5 Bayonet

Click here to increase the font size Click here to reduce the font size
  1. #1
    Advisory Panel
    (Deceased Feb 2023)
    Bill Ricca's Avatar
    Join Date
    Mar 2009
    Last On
    09-03-2013 @ 09:18 AM
    Location
    Northeastern Pennsylvania
    Posts
    605
    Local Date
    03-28-2024
    Local Time
    07:35 PM

    Utica M5 Bayonet

    The M5 is my favorite. Unfortunately there are tons of M5A1's round, but not too many US M5's. The Utica is quite scarce.

    It has the Ordnance Bomb markings. None of the other M5's or M5A1's have it.



    I saw a publication that covered Utica's production and it said 28,000 Utica M5's were produced. That must be a very small percentage compared to the rest of production. The M5A1's production started in 1962.


    Here is a publication showing the productions of the M5A1's.

    http://www.billricca.com/pubs/m5_comb_fin2.jpg
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by Bill Ricca; 07-18-2012 at 10:02 PM.

  2. The Following 2 Members Say Thank You to Bill Ricca For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Legacy Member Joe W's Avatar
    Join Date
    Mar 2009
    Last On
    07-20-2021 @ 09:25 PM
    Location
    S.W. Florida
    Posts
    720
    Local Date
    03-28-2024
    Local Time
    07:35 PM
    The following is from Gary Cunningham's "Bayonet Points"

    "Within a fairly short time, complaints began to come in from the field that the M5 was sometimes very difficult to remove from the rifle, especially if wearing gloves. It was found that under many conditions it was too hard to sufficiently depress the latching lever, and that on some rifles there was a little fore-and-aft movement. Further development led to a modification of the latching lever and the cuts in the tang for the placement of the coil lever return spring. The spring angle was altered to change the direction of the load to an angle from the rear from its previous vertical position, and the hole in the lever was changed to an oval shape to allow some lateral movement to tighten the lever against the bayonet stud when locked. These changes caused the nomenclature to be changed from M5 to M5A1. I have not found the record as to when the change officially occurred (although it apparently was in the 1956 time period) - does anyone have that information? In the photo below, note the more or less vertical backcut (the line between the true edge at the bottom and the centerline of the blade) used on US contract M5 and M5A1 bayonets other than those made by J&D Tool Co which is discussed later in this article."

    I have a M5A1 that happened to come home with me when I was discharged from the M.C. in 1959. It was in 1956 that I was issued a M5 or M5A1 Bayonet, not sure at this time which it was. I most likly got the M5A1, which I still have, sometime in 1957.
    I am guessing that you may be speaking only of those M5A1 bayonets manufactured by Utica. The "Development Background" is surely wrong if it is implying that it was only between "Oct. 1962 and March 1967" that the M5A1 was manufactured.
    Last edited by Joe W; 07-12-2012 at 08:11 PM.

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Advisory Panel
    (Deceased Feb 2023)
    Bill Ricca's Avatar
    Join Date
    Mar 2009
    Last On
    09-03-2013 @ 09:18 AM
    Location
    Northeastern Pennsylvania
    Posts
    605
    Local Date
    03-28-2024
    Local Time
    07:35 PM
    Thread Starter
    No, Utica made only M5's. Again it was a very small contract.

    I have never let out information, but in 1986 I purchased about several Utica M5's that were early experimetal production. They made 50 of them. The springs were different. There were no grips made yet. They were never sent as part of the contract because they were working on processing production. Two of them have misaligned holes.

    I got them from a pair of guys who were responsible for selling a lot of old material for Utica. They had lots of commercial knives, but I got all the military they had left. I worked with SARCO and we purchased over 5,000 WWII M1icon Bayonets, in partial production. Many still need lots of cuts. I have several that are neat as examples of forging.

  7. #4
    Legacy Member Joe W's Avatar
    Join Date
    Mar 2009
    Last On
    07-20-2021 @ 09:25 PM
    Location
    S.W. Florida
    Posts
    720
    Local Date
    03-28-2024
    Local Time
    07:35 PM
    Bill, My point was that the M5A1 was manufactured long before 1962. More likely in 1956.
    As I said, less the part about the Utica, " I have a M5A1 that happened to come home with me when I was discharged from the M.C. in 1959. It was in 1956 that I was issued a M5 or M5A1 Bayonet, not sure at this time which it was. I most likly got the M5A1, which I still have, sometime in 1957.
    The "Development Background" is surely wrong if it is implying that it was only between "Oct. 1962 and March 1967" that the M5A1 was manufactured."
    Last edited by Joe W; 07-15-2012 at 07:21 PM.

  8. #5
    Advisory Panel
    (Deceased Feb 2023)
    Bill Ricca's Avatar
    Join Date
    Mar 2009
    Last On
    09-03-2013 @ 09:18 AM
    Location
    Northeastern Pennsylvania
    Posts
    605
    Local Date
    03-28-2024
    Local Time
    07:35 PM
    Thread Starter
    What markings are on your M5A1?

  9. #6
    Legacy Member Joe W's Avatar
    Join Date
    Mar 2009
    Last On
    07-20-2021 @ 09:25 PM
    Location
    S.W. Florida
    Posts
    720
    Local Date
    03-28-2024
    Local Time
    07:35 PM
    Quote Originally Posted by Bill Ricca View Post
    What markings are on your M5A1?

    PM sent

  10. #7
    Legacy Member Joe W's Avatar
    Join Date
    Mar 2009
    Last On
    07-20-2021 @ 09:25 PM
    Location
    S.W. Florida
    Posts
    720
    Local Date
    03-28-2024
    Local Time
    07:35 PM
    Quote Originally Posted by Bill Ricca View Post
    What markings are on your M5A1?
    Believe it to be marked with the "Eagle and 3 stars" DAS. It is an AERIAL which is marked M5-1 instead of M5A1.

+ Reply to Thread

Similar Threads

  1. Utica Mk II Did I get burned?????
    By FFAM1 in forum Edged Weapons Forum
    Replies: 8
    Last Post: 08-22-2017, 05:12 PM
  2. Utica Cutlery bayonet
    By TerryS in forum Edged Weapons Forum
    Replies: 2
    Last Post: 06-18-2011, 12:01 AM
  3. Can anyone ID This bayonet
    By pcaru1 in forum Edged Weapons Forum
    Replies: 3
    Last Post: 05-04-2011, 04:55 PM
  4. Utica K-bar
    By nhetzer in forum Edged Weapons Forum
    Replies: 2
    Last Post: 08-22-2010, 09:04 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks