+ Reply to Thread
Results 1 to 9 of 9

Thread: Questions on Springfield M1903 with Weaver 330 scope

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    cardincal's Avatar
    Join Date
    Jan 2013
    Last On
    01-04-2020 @ 07:13 PM
    Location
    NorCal
    Posts
    2
    Local Date
    03-28-2024
    Local Time
    12:55 AM

    Questions on Springfield M1903 with Weaver 330 scope

    Hey all,
    I am new here and I have a few questions on my grandfathers rifle that was recently given to me.
    It appears to be a Springfield US Armory M1903 SN 1536035. The barrel is 22in from the receiver to the tip and has the RA stamp on the end with a date of 7-43. There are no grooves for a sight. It currently has a Bishop sporter stock with a pistol grip.
    The scope is a Weaver 330 with pencil engraving on the side "telescope M73B1 Serial #10616" it is mounted on a Redfield mount.
    The rifle appears to be in great condition to my greenhorn eye, with no rust or scratches on the barrel or scope. The stock is in really good shape with a small scratch below the bolt.
    My questions are: could the barrel be original to the receiver? I cannot find any info on any forums regarding Springfield receivers with a SN in that range. and with the scope having the military markings, could this receiver and barrel been converted to a sniper rifle during the war?
    My last question to the group is, with the shortened barrel, would it be possible/worth it to convert it back to an original "C" stock?

    Thank you all in advance for your help,
    Charlie
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member Salt Flat's Avatar
    Join Date
    Nov 2011
    Last On
    Yesterday @ 03:57 PM
    Location
    USA
    Posts
    760
    Local Date
    03-28-2024
    Local Time
    01:55 AM
    1939 receiver. A "C" stock would be nice but the short barrel would look odd. I think I would find an original 03 barrel to go with it. It might all add up though to too much money to invest in a rifle that has been drilled and tapped. Salt Flat
    Last edited by Salt Flat; 01-03-2013 at 12:55 PM.

  4. Thank You to Salt Flat For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Advisory Panel Chuckindenver's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 12:08 PM
    Location
    Denver Co
    Age
    61
    Posts
    3,150
    Real Name
    chuck
    Local Date
    03-28-2024
    Local Time
    02:55 AM
    no, it was never a sniper rifle.
    what i would do, is sell the M73B1, and you will have enough money to buy an unmodified 1903.
    and likely a better scope.
    your receiver was one the last ones made.
    Barrel is off a 1903A3, and wasnt installed by the Military.
    correct barrel date would be 38 or 39.
    Last edited by Chuckindenver; 01-03-2013 at 04:30 PM.
    warpath metal finishing contact info.
    molinenorski@msn.com
    720-841-1399 during normal bus, hours.

  7. Thank You to Chuckindenver For This Useful Post:


  8. #4
    Legacy Member Neal Myers's Avatar
    Join Date
    Mar 2009
    Last On
    06-07-2023 @ 08:25 PM
    Posts
    474
    Local Date
    03-28-2024
    Local Time
    04:55 AM
    There are 2 types of Weaver 330 scopes: those with click adjustments (330C), & those with screw adjustments (330S). While there is documentation that 330C scopes were used on the earliest 1903A4 rifles, it is unlikely any 330S scopes were used. (Most soldiers didn't have a screwdriver.) It is also likely that few, if any, USGI issued 330 scopes survived WW2, &, if so, they would be in poor condition. 330 scopes were sold commercially from before WW2 to the 1950's.

    Several variation of M73B1 scopes, as well as the M8 scope, were issued later in WW2. While some 330C scopes theoretically may have had some M73B1 markings hand engraved, any basement tinker could have marked any given scope. So, your scope is now, & will always be, a 330 scope. Still, some novice collector who doesn't know the difference might pay a lot more than the $50 I would pay for one, in the belief that the markings make it as good as a real M73B1 scope.

    I agree that your rifle requires too many expensive parts & too much expensive labor, &, at best, it would still only be a mixed parts mongrel worth only a little more than it is now worth.

  9. #5
    Legacy Member Calif-Steve's Avatar
    Join Date
    Mar 2009
    Last On
    10-01-2023 @ 12:52 AM
    Posts
    2,508
    Local Date
    03-28-2024
    Local Time
    03:55 AM
    A very nice hunting rifle. I would keep it as is and enjoy it.

  10. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    cardincal's Avatar
    Join Date
    Jan 2013
    Last On
    01-04-2020 @ 07:13 PM
    Location
    NorCal
    Posts
    2
    Local Date
    03-28-2024
    Local Time
    12:55 AM
    Thread Starter
    Thank you all for your replies and information. I really do like the rifle and plan to keep it the way it is and pass it along to my son when he becomes of age. I am not into hunting but I used to do alot of target shooting with my dad and we both plan to get back into it after I get the rifle checked out to make sure it is safe to shoot. As far as the scope is concerned, I do believe it is an original M73B1 as the rifle was found in my grandfathers attic after he passed and was probably there for a good 40+ years. (along with a Winchester 1906 22cal, and a early Argentineicon version of the Colt 1911) then it sat in my dad's closet for the last ten years. When he pulled it out and gave it to me the first thing he said was "First thing I would do is get rid of that old scope and put a new one on there" So I doubt my dad tinkered with it. And my grandfather? forget it, he was as honest as they come.

    Here are some pics of the rifle, my brother may have gotten my grandfathers bat signed by Will Clark, but I think I got the better deal.
    Thanks again,
    Charlie










  11. #7
    Legacy Member Neal Myers's Avatar
    Join Date
    Mar 2009
    Last On
    06-07-2023 @ 08:25 PM
    Posts
    474
    Local Date
    03-28-2024
    Local Time
    04:55 AM
    The scope is a 330C, but it really doesn't matter whether or not the engraving was done by the US military. The model scope is determined by the manufacturer. This is a M73B1:



    The person who did the sporterizing had access to good stuff. The bolt (which has been arsenal refinished) is from a 1903A4, probably worth $200-300. The 3/4" parkerized one-piece USGI rings are worth $200-300, & the Redfield USGI base another $100. And, that may be a M1907 sling.

    Sporterized 1903's are usually worth $200-300, but yours is worth way more than that in parts alone.

  12. #8
    Advisory Panel Chuckindenver's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 12:08 PM
    Location
    Denver Co
    Age
    61
    Posts
    3,150
    Real Name
    chuck
    Local Date
    03-28-2024
    Local Time
    02:55 AM
    so, if the rifle is a 1903, and based on the serial number you posted, it is..they modified a real 1903A4 scope base, with correct rings and scope.
    and its only held by 2 screws. stock is a cut up and sanded A4 stock. and genuine A4 bolt.
    value of the scope...is 800.00 and up value of the bolt is closer to 500.00 value of the rings 150.00 value of the base if not screwed up by grinding is 250.00
    again.
    you could build a nicer rifle that would shoot better for your son, and mount the right scope base, with a nicely done sporter bolt, nice stock, and a quality scope, and still have some money in your pocket.
    warpath metal finishing contact info.
    molinenorski@msn.com
    720-841-1399 during normal bus, hours.

  13. #9
    Advisory Panel
    JGaynor's Avatar
    Join Date
    Dec 2008
    Last On
    03-07-2024 @ 10:07 AM
    Location
    Northern New Jersey
    Posts
    887
    Local Date
    03-28-2024
    Local Time
    03:55 AM
    Cardincal if you are looking for suggestions:
    1. Keep the 330C/M73B1 and rings as they are. The assembly will fetch upwards of $1000. on eBay virutally any day of the week.
    2. Get a pair of Redfield or Leupold 1" rings and install a nice, 1", Weaver, Bushnell or Burris, a 3 x 9X Variable is pretty flexible. Naturally, you can up the specs or spend more if your choose.
    3. Have a pro replace the recoil pad. It looks deteriorated and doing the installation is trickier than a lot of folks realize.
    4. Do not refinish the bolt. It appears to have the gray parkerizing used on A4 rebuilds (which constitute the majority of A4's out there).

    Shoot your rifle and enjoy it. Normal target shooting won't hurt a thing. With the possible exception of a 60+ year old telescopic sight. Old scopes do not improve with age!

    Regards,
    Jim
    Last edited by JGaynor; 01-07-2013 at 08:58 PM.

  14. Thank You to JGaynor For This Useful Post:


+ Reply to Thread

Similar Threads

  1. Weaver 330 SCOPE-M8 Value?
    By No4Mk1(T) in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 10
    Last Post: 10-09-2010, 07:16 PM
  2. Weaver K4 Scope
    By Enfield4 in forum M1 Garand/M14/M1A Rifles
    Replies: 3
    Last Post: 03-01-2010, 03:54 PM
  3. Springfield M1903 Questions
    By socomstix in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 9
    Last Post: 01-26-2010, 06:18 PM
  4. weaver scope repair?? where
    By Pelago in forum The Watering Hole OT (Off Topic) Forum
    Replies: 2
    Last Post: 10-11-2009, 09:42 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks