+ Reply to Thread
Results 1 to 10 of 10

Thread: Swedish Rolling Block rifle

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    RogerD's Avatar
    Join Date
    Nov 2011
    Last On
    08-25-2013 @ 04:43 PM
    Location
    The Wild West
    Posts
    20
    Local Date
    03-28-2024
    Local Time
    03:40 AM

    Swedish Rolling Block rifle

    So I was in my local gun shop today, and came across one of these beautiful rifles, in the oddball, 12.7x44 cartridge. It's a very nice rifle, clean and doesn't look too used or screwed with at all, by the previous owner(s). The shop is asking $800 for it. Is this a good price considering it's in this day and age, a hand loader's rifle and does have a good stock and bright insides?

    Also, about that oddball 12.7x44. I've figured hand loading is of course a necessity, but what do I hand load it from? What case do I have to trim or whatnot, to make it.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-28-2024
    Local Time
    11:40 AM

    Start with 348 WIN cases...

    I think your best bet is to start with 348 WIN cases, cut to length, anneal top end, expand to size, fire-form. Dies from CH4D. Bullets? - Something for 50-70 could fit, but you may end up needing a custom mould. You'll have to search out the dimensions yourself, but take them as a first approximation, not guaranteed figures. My experience with old BPCRs is that in the end you have to measure up what you actually have, not what a drawing says it ought have been 140 years ago! A chamber cast is a very good idea, otherwise it's all a bit of trial and error. And slug the bore!

    As to price - they go for considerably less over here, because of the expense and effort required for reloading. Find out what the dies and a bullet mould will cost before taking the plunge! You are likely to discover that for the cost of the rifle + reloading equipment you could get yourself something much easier to feed, such as a Trapdoor in 45-70 (very desirable for competition shooting, because the sights are better than just about all other military BPCRs). Or a .43 Spanish RB for noticeably less than a Trapdoor, but requiring the dies and bullet mold...

    BPCRs are fun, if you like serious, precision DIY activities. But I would not recommend the Swede as a starter, unless you welcome the challenge of a really steep learning curve!
    Last edited by Patrick Chadwick; 05-25-2013 at 05:49 PM.

  4. The Following 2 Members Say Thank You to Patrick Chadwick For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    RogerD's Avatar
    Join Date
    Nov 2011
    Last On
    08-25-2013 @ 04:43 PM
    Location
    The Wild West
    Posts
    20
    Local Date
    03-28-2024
    Local Time
    03:40 AM
    Thread Starter
    Hmm, that seems like a bit much for me to put into. I guess I'll have to pass, but it sure was a nice looking rifle. I know that the Swedes also had a later model, in 8x85R Danishicon. Of course that's an oddball cartridge nowadays too. The Swede there is the only Rolling Block I've come across, that wasn't one made for the American market, but what about those in the Danish? Easier to hand load for, and make the proper cases and bullets, or just as difficult?

    Thanks Patrick, for your reply.

  7. #4
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-28-2024
    Local Time
    11:40 AM
    Most of the originally 12,7mm Swedishicon RBs seem to have been converted to the Danishicon cartridge or bored out to make a shotgun.
    The 8x58R Danish cartridge is also a very tough problem with regard to the cases.

    I do in fact have an Egyptian RB, but I would not have acquired it if it had not come with an RCBS die set. Looking at what such a die set costs, you could say I bought a die set and got a free rifle thrown in!

    Seriously, if you live in the USAicon or Canadaicon, then stick to the recommended first choice (45-70) or second choice (43 Spanish) unless you come across a cheap die set for the oddball caliber of your choice. And in my previous post I forgot to mention the cases. Any oddball caliber for which you cannot convert cases from something readily available - and for the Egyptian I can reform 32g brass shotgun cases - will cost a fortune in brass.

    Of course, if a rifle is really good enough to warrant the trouble, then just about everything can be made to fire again. Which is why I am working on a Swissicon Peabody in .41 Swiss rimfire. For which there is an economically priced die set from Lee, and cases can be reformed from 348 WIN or 8x50R Lebel. Then there is the problem of adapting these to rimfire... But it has taken me a few years of experience with simpler calibers to acquire the know-how to tackle such a project. Don't start off with something that may turn out to be an expensive flop!
    Last edited by Patrick Chadwick; 05-26-2013 at 09:36 AM.

  8. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    RogerD's Avatar
    Join Date
    Nov 2011
    Last On
    08-25-2013 @ 04:43 PM
    Location
    The Wild West
    Posts
    20
    Local Date
    03-28-2024
    Local Time
    03:40 AM
    Thread Starter
    Thanks Patrick. Guess I'll pass up any 8x58R Rolling Block too, I might come across. I'm not too much of a Rolling Block man, but they are cool rifles.

  9. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    Carlos16's Avatar
    Join Date
    Oct 2012
    Last On
    01-29-2014 @ 10:17 PM
    Location
    Victoria BC
    Posts
    6
    Local Date
    03-28-2024
    Local Time
    01:40 AM
    Gunboards has a 3 part board for swedish arms. I have Swedishicon rollers in both 12.7 X 44R and 8 X 58 RD. The 12.7 is so close to .50-70 that cases and dies can be used. The rim might have to be narrowed slightly, and the oal trimmed back if the cases won't fully chamber. Lyman mould 512139 at 350 grains or so works unsized with SPG rubbed into the grooves. The original bullet for military ammo was a hollow base design taken from the 1860 Wredes muzzle loading rifle

    I also have an Husqvarna underlever cape gun in 12.7 X 44R and 16 ga. The rifle chamber is tighter so I had to go to the .348 WCF case and size the bullet to .512

  10. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    conec's Avatar
    Join Date
    Jan 2011
    Last On
    01-27-2015 @ 10:53 AM
    Location
    Prescott, Arizona USA Earth
    Posts
    136
    Real Name
    Chris
    Local Date
    03-28-2024
    Local Time
    02:40 AM
    FYI, Allan's Armory has a bunch of 12mm Swedishicon rolling blocks for a bunch less than $800...

  11. #8
    Legacy Member jamie5070's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 09:57 PM
    Location
    tucson, arizona
    Posts
    548
    Local Date
    03-28-2024
    Local Time
    04:40 AM
    The original barrels can be very tight with deep rifling. Mine has .506 groove diameter and .482 bore diameter. I only plink with it .515 bullets and light charges, but I saw one in a gun shop that had been reamed to 50-90. I can only wonder what kind of presures the wrong person could create in that rifle.
    john

  12. #9
    Legacy Member colfi's Avatar
    Join Date
    Aug 2010
    Last On
    07-19-2020 @ 01:02 AM
    Posts
    21
    Local Date
    03-28-2024
    Local Time
    07:40 PM
    I have two RB's that started life as 12.7x44's. I have kept one as an original, the other I had my local gunsmith run theb 50-70 chamber reamer into it, more or less it just cleaned the chamber and it works fine as a 50-70. caes and moulds are readily available and theres no mucking about, I use 348 and some 50-70 cases for the original, they both work fine for me. hope this all helps

  13. #10
    FREE MEMBER
    NO Posting or PM's Allowed
    philcressman's Avatar
    Join Date
    Apr 2013
    Last On
    01-22-2014 @ 10:23 PM
    Location
    Ontario
    Age
    78
    Posts
    2
    Local Date
    03-28-2024
    Local Time
    05:40 AM
    I have found that 50 Alaskan brass cut down to 44mm works just great in the 12.7 x 44 Swedishicon Rolling Block rifle. Compressed Black powder & 350 hollow base bullets used in 50 cal muzzle loaders.

    Phil in Waterloo, Ontario

+ Reply to Thread

Similar Threads

  1. Rolling block project
    By Salt Flat in forum Gunsmithing for Old Milsurps
    Replies: 6
    Last Post: 04-23-2013, 03:10 PM
  2. Rolling Block and Barrel ? need opinions
    By Doug Rammel in forum Black Powder
    Replies: 3
    Last Post: 06-16-2011, 07:07 PM
  3. Remington Model 4 Rolling Block Rifle
    By Pattern14 in forum The Watering Hole OT (Off Topic) Forum
    Replies: 6
    Last Post: 06-02-2010, 06:37 PM
  4. Swedish Rolling Block Butt Disc
    By K31 in forum Mauser Rifles
    Replies: 4
    Last Post: 04-09-2008, 08:08 PM
  5. LOADING FOR SWEDISH ROLLING BLOCK, 8mm
    By K31 in forum Ammunition and Reloading for Old Milsurps
    Replies: 2
    Last Post: 03-17-2008, 05:37 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks