+ Reply to Thread
Results 1 to 7 of 7

Thread: Spanish Mauser 308?

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Flipper 56's Avatar
    Join Date
    Feb 2009
    Last On
    05-09-2011 @ 04:14 AM
    Location
    Shinhopple
    Posts
    11
    Local Date
    03-18-2024
    Local Time
    10:34 PM

    Spanish Mauser 308?

    I recently acquired a Spanish Mauser which after a little research turns out to be a Model 1916. The person I bought it from said it is a 308. Underneath the front sight just sort of the barrel is stamped
    Oviedo Spain M1916
    SAMCO MIA FL 308W
    I have read a great deal of opinions discussing commercial 308 Winchester as being too hot for these rifles. Others claim they have been shooting 308 Winchester in theirs for years. It is a very good looking gun and I want to keep it that way. Anybody have any experience with these rifles?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Senior Moderator
    (Founding Partner)


    Site Founder
    Claven2's Avatar
    Join Date
    Oct 2006
    Last On
    08-09-2023 @ 10:17 PM
    Location
    Scandaltown, Ontario
    Posts
    3,242
    Real Name
    Ronald
    Local Date
    03-18-2024
    Local Time
    09:34 PM
    If it's an FR-7, generally, use reduced loads. If it's an FR-8, normal NATO 7.62 spec is fine. If it's a Guardia Civil rifle, it would depend if it's a large ring or a small ring. Also, if the bolt is mismatched, or even if it is not, good idea to have the headspace checked before firing it.

    Pics of the receiver might prove useful to help you out.
    Союз нерушимый республик свободных Сплотила навеки Великая Русь. Да здравствует созданный волей народов Единый, могучий Советский Союз!

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    Flipper 56's Avatar
    Join Date
    Feb 2009
    Last On
    05-09-2011 @ 04:14 AM
    Location
    Shinhopple
    Posts
    11
    Local Date
    03-18-2024
    Local Time
    10:34 PM
    Thread Starter
    Claven2 wrote,
    If it's a Guardia Civil rifle, it would depend if it's a large ring or a small ring.
    Yes, it's a Guardia Civil small ring. From what I can tell from my research, it is called a Model 1916 "OT" series (referring to the prefix in the serial #) At one time it was most likely a 7x57mm which was rebarreled at the Oviedo arsenal into a 308. It seems Spain did that with a great deal of rifles during the '50s and '60s. I just can't get a definitive answer as to just what this 308 cartridge is I believe there is a similar controversy in regard to one of the Enfields..... A 2a or Ishapore which fires 308 cartridges rather than the usual 303 Britishicon.

  6. #4
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-19-2024
    Local Time
    04:34 AM

    "Spanish" 308 cartridge

    ...was actually termed the CETME cartridge. Dimensionally the same as 308 but apparently not the same pressure rating as 7.62x51 NATO (which is alos , for thenitpickers, not quite the same as 308 Win). You will have to dig out the CETME info yourself, but the advice to use light 308 loads is prudent.

    Patrick

    P.S. try the Spanish site MUNICION.ORG

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    Jim K's Avatar
    Join Date
    Mar 2009
    Last On
    12-01-2009 @ 03:41 PM
    Posts
    505
    Local Date
    03-18-2024
    Local Time
    10:34 PM
    The Model 1916 is a modified version of the old Model 1893. The Spanish intended the FR-7 (converted from 7mm) and FR-8 (converted from the 8mm Model 1943) to be training rifles for the CETME and to fire the same cartridge. The FR-8 uses a Model 98 Mauser action and is more than adequately strong for any 7.62 NATO or .308 Winchester load.

    The FR-7 was designed for the 40,000 to 45,000 pressure level and I recommend that not be exceeded, which means handloading the 7.62 NATO/.308 Winchester. The guns will not "blow up" in a few shots, but the higher pressures will gradually batter locking lug and lug seats and eventually cause excess headspace.

    Jim

  8. #6
    Legacy Member Maple_Leaf_Eh's Avatar
    Join Date
    Feb 2007
    Last On
    02-24-2024 @ 11:51 PM
    Posts
    252
    Local Date
    03-18-2024
    Local Time
    09:34 PM
    Do yourself a favour and go visit some primary research (ie not internet rumour ...) Colin's Ballistics . I know the author quite well, and trust his work.

  9. #7
    Legacy Member Vincent's Avatar
    Join Date
    Mar 2009
    Last On
    02-27-2020 @ 09:22 PM
    Location
    Texas
    Posts
    1,890
    Local Date
    03-18-2024
    Local Time
    08:34 PM
    A nice bit of history you have there. I lived in Spain in the 60's when Franco was still in power. I remember seeing him drive by in a black Rolls Royce. People there said Hitler gave it to him.

    You might be interested in this article, .308 Winchester VS. 7.62 NATO written by Mark Trope. He says he has "fired NATO equivalent handloads with no problems", but warns against using commercially produced .308 Winchester as the maximum pressure could be too high.

    BTW, I have been using surplus 7.62x51 in a converted Enfield No. 4 for almost 30 years without a problem. The action is still smooth as silk.

+ Reply to Thread

Similar Threads

  1. Perplexed with a Spanish Mauser Model 1916
    By Flipper 56 in forum Gunsmithing for Old Milsurps
    Replies: 9
    Last Post: 05-25-2009, 05:27 PM
  2. 1896 Swedish Mauser 6.5x55mm (Mfg by Mauser Werk Oberndorf) (CGN Private Ad)
    By Badger in forum Appraisals, Fakery, Dispute Resolution & Mediation Forum
    Replies: 1
    Last Post: 10-03-2007, 07:35 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks