+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 18 of 18

Thread: Linseed Oil Finish - How to Clean? Refinishing?

Click here to increase the font size Click here to reduce the font size
  1. #11
    FREE MEMBER
    NO Posting or PM's Allowed
    villiers's Avatar
    Join Date
    Jul 2008
    Last On
    01-08-2017 @ 08:32 AM
    Location
    xxxxxxxxxxxxxxxxx
    Posts
    1,084
    Real Name
    xxxxxxxx xxxxxxxxx
    Local Date
    03-29-2024
    Local Time
    04:02 AM
    After removing some of the worst dings with a damp cloth and a fairly hot steam iron, I use pure, unadulterated linseed oilicon, rubbing hard with a cloth on a cork sanding block. If there´s anything that does not come off, I use very fine pumice dust, mixed in with the oil and just rub hard. After several hours a day, and in just a few weeks, I guarantee that the finished stock will pass inspection.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #12
    Legacy Member UNPROFOR1994's Avatar
    Join Date
    May 2014
    Last On
    02-08-2024 @ 08:45 AM
    Location
    Continental Europe
    Posts
    269
    Local Date
    03-29-2024
    Local Time
    03:02 AM
    Quote Originally Posted by WarPig1976 View Post
    Good Lord.!!!!! Where to begin...
    Yes, oven cleaner is one way to STRIP a stock but not many here would suggest that method but as they say, To each his own..
    I know the oven cleaner isn't the best method but the walnut oil works great, just try it once on a cheap R.C. Mauser or Mosin Nagant. The wood looks great. Just use the cheap walnut oil you can get for cooking.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #13
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    Today @ 02:10 PM
    Location
    Edgefield, SC USA
    Posts
    4,040
    Local Date
    03-28-2024
    Local Time
    09:02 PM
    Try grocery store grade clear ammonia and a Scothbrite pad. Rinse with cold water, reapply RLO and buff out with fine steel wool. Repeat as many times as you desire. Never-ever-ever use lye based oven cleaner. It will damage and discolor or grey most gunstock wood and will destroy wood like Australianicon coachwood. No offense to anyone intended but it's a lazy mans method and does more harm than good.

  6. The Following 2 Members Say Thank You to Brian Dick For This Useful Post:


  7. #14
    FREE MEMBER
    NO Posting or PM's Allowed
    Johnny Peppers's Avatar
    Join Date
    Mar 2009
    Last On
    05-01-2015 @ 11:25 PM
    Posts
    1,810
    Local Date
    03-28-2024
    Local Time
    08:02 PM
    It all depends on how bad the stock is. If past restoring the finish, you might as well strip it and start over, but this is for basket cases only. If the stock is just grungy dirty with build up, us a mix of 50/50 turpentine and boiled linseed oilicon, and a 4/0 steel wool pad does wonders. Give the stock a heavy coat of the 50/50 mix and let it set 30 minutes to an hour, and then gently rub it down with the 4/0 steel wool. You can tell when the grunge is coming off, and when through wipe the stock down with toweling. After this you can use the 50/50 mix in very thin coats to restore the finish.

    Oven cleaner works by breaking down organic material, and wood is organic. Some woods treated with oven cleaner turn yellow/green over time due to caustic bath in oven cleaner.

  8. #15
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-29-2024
    Local Time
    03:02 AM
    Quote Originally Posted by Brian Dickicon View Post
    Never-ever-ever use lye based oven cleaner. It will damage and discolor or grey most gunstock wood and will destroy wood like Australianicon coachwood. No offense to anyone intended but it's a lazy mans method and does more harm than good.

    Thanks for that, Brian. It's reassuring to know that I'm not alone on this. Likewise, drying methods like "put it in the oven/behind a window in blazing sunshine" are for people who have apparently never heard of "grain", "shrinkage" and "warping". Methods that would disturb a serious carpenter and shock a cabinet-maker are totally unsuited to a piece of precision engineering.

  9. Thank You to Patrick Chadwick For This Useful Post:


  10. #16
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    Today @ 02:10 PM
    Location
    Edgefield, SC USA
    Posts
    4,040
    Local Date
    03-28-2024
    Local Time
    09:02 PM
    I learned the ammonia trick in my youth from a gunsmith who built and restored many original black powder firearms from American Revolutionary War times through the American Civil War and later. It will clean/remove the grunge and grime and redistribute what's left of the old oil finish without damaging anything. Just be sure and use it outdoors or in a well ventilated area so it doesn't damage you! It's fine to put wood in the sun once coated with RLO and it will speed up the absorption process because the grain opens up a bit but you must be careful to make sure the oil doesn't build up in the bearings and draws because things will change. I've never had a problem with warping but I suppose it's possible if you don't keep a careful eye on things. I put them in the sun too to dry them out after cleaning and rinsing. It will raise the grain and many of the little handling marks and scratches will disappear when you soak it down with oil and rub it out with 0000 steel wool. It won't affect markings or original character if done carefully. I haven't laid a scraper or sand paper on an original stock for years unless it's an absolute basket case. It's really a no-no from a collector's point of view. Cleaning and preservation is a different story.

  11. #17
    Legacy Member Bruce_in_Oz's Avatar
    Join Date
    Jun 2008
    Last On
    Today @ 04:54 AM
    Location
    Brisbane
    Posts
    2,237
    Local Date
    03-29-2024
    Local Time
    11:02 AM
    Just be careful with steel wool, especially the ultra-fine grades.

    Tiny fibres of steel get hooked on the "oblique" ends of the grain and they WILL corrode over time.

    This will leave nasty, odd coloured stains on the timber.

    My trick to remove any "metal whiskers" is simple:

    Get the meanest, most powerful "permanent" magnet to be found.

    Wrap it in a couple of layers of CLEAN, cheese-cloth.

    Glide the "non-scratch" magnet slowly along the grain of the stock (or antique table etc).

    Inspect the cloth for little grey whiskers.

    Reverse or replace the cloth and then run it in lines in the opposite direction.

    Novelty and scientific supply folks sell small "super magnets" that are very handy for getting into nooks and crannies with this technique. (also useful for finding, picking up etc., small "feral" parts that leap off the bench. Sadly, these do not work on brass screws...........

  12. The Following 2 Members Say Thank You to Bruce_in_Oz For This Useful Post:


  13. #18
    Legacy Member WarPig1976's Avatar
    Join Date
    Jan 2013
    Last On
    01-30-2023 @ 05:49 PM
    Location
    Delaware county, PA just outside Philadelphia.
    Posts
    2,659
    Real Name
    Jeff
    Local Date
    03-28-2024
    Local Time
    08:02 PM
    I use "Tack cloth" and compressed air whenever I work with steel wool and wood. Tack cloth is sticky cheese cloth, available anywhere paint/stain is sold, woodworkers use it after sanding and between coats of finish.

  14. The Following 3 Members Say Thank You to WarPig1976 For This Useful Post:


+ Reply to Thread
Page 2 of 2 FirstFirst 1 2

Similar Threads

  1. Too much boiled linseed oil on stock!
    By Maple_Leaf_Eh in forum Gunsmithing for Old Milsurps
    Replies: 5
    Last Post: 08-12-2011, 02:41 PM
  2. Linseed Oil
    By Aragorn243 in forum The Restorer's Corner
    Replies: 9
    Last Post: 03-22-2011, 08:41 AM
  3. 1923 lithgow, to clean or not to clean?
    By BushyFromOz in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 11
    Last Post: 01-06-2011, 06:50 PM
  4. Boiled Linseed Oil on stock
    By Aragorn243 in forum The Restorer's Corner
    Replies: 6
    Last Post: 10-16-2010, 11:24 AM
  5. Raw linseed darker?
    By GerryRA in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 7
    Last Post: 01-30-2010, 06:57 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks