-
Legacy Member
Carbine ejects to forehead
What's the fix for a carbine that ejects consistently to the forehead?
Thanks
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
07-25-2014 09:20 PM
# ADS
Friends and Sponsors
-
Contributing Member
-
The Following 2 Members Say Thank You to mmppres For This Useful Post:
-
-
Legacy Member
Yeah, I just wear a regular baseball cap. Seems to work out ok.
-
-
Dennis?
It's your Ejector more than likely.
Ideal one would be a flat faced cone, with well defined chamfered edges all the way around.... called a type III.
I just shot a NPM out at CCRC with my son that day, you were showing new members around. (Orientation)
My NPM has a Type II, it's much like the Type III but not as heavy of a outside bevel or (Chamfer). It's worn and I ended up with the last 8-10 mags we shot going off the forehead.
Cheers,
Charlie-Painter777
-
The Following 3 Members Say Thank You to painter777 For This Useful Post:
-
Legacy Member
Yes, Charlie, it is Dennis. Thanks for the replies and suggestions. I have tried switching from the multi-faceted ejector to the outside bevel or chamfered. It had no affect. I will try using a type4/5 op rod instead of the type 2 and see if that clears it. I'll let you know if it works or what eventually does work. Dennis
-
Thank You to dek For This Useful Post:
-
Advisory Panel
That would be nice. We seldom get feedback once the situation is remedied.
-
Thank You to browningautorifle For This Useful Post:
-
Legacy Member
I had one where I had to use the late ejector and late slide to keep it from hitting me. The late slide should work.
-
-
FREE MEMBER
NO Posting or PM's Allowed
Extractor
If the ejector is moving freely in the bolt I would change the extractor and see what happens. If the extractor is worn or broken and not holding the side of the case rim long enough it might cause the case to come out straight to the rear. Wouldn't take much to try it and see. JMHO
-
Legacy Member
Changed the extractor, changed the slide from a type 2 to type 5 and headed for the range this afternoon to see if it works. I'll let ya'll know later.
Last edited by dek; 07-28-2014 at 12:07 PM.
Reason: error
-
The Following 5 Members Say Thank You to dek For This Useful Post:
-
Legacy Member
It worked. The angle of ejection has changed. I do have a type 3 ejector coming and will try that with the old slide. If it works, the type 3 ejector's the answer. If not, then the need for the type 5 slide. Thanks for all the replies and suggestions. Much appreciated. Dennis
-