+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Basic Reloader and Necessary Tools for Beginner

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Bzuefishx's Avatar
    Join Date
    Jul 2014
    Last On
    08-02-2014 @ 01:48 PM
    Location
    Alaska
    Posts
    8
    Local Date
    03-29-2024
    Local Time
    03:55 AM

    Basic Reloader and Necessary Tools for Beginner

    Hello,

    I am interested in getting into reloading for milsurp rounds.

    In the past, I was able to order most of the ammo I needed online, especially Privi from several sources (AIM Surplus as an example). Unfortunately, there is no such thing as "UPS Ground" to Alaska, so shipping of ammo from the lower 48 is prohibitively expensive and/or a complete pain in the @$$. Fortunately, most of the more mundane rounds - 5.56, 7.62x51, 7.62x39, etc. - are easy to find at local retailers.

    Rounds I'd like to reload include 7.5 Swissicon, 7.5 Frenchicon, 6.5 Swedishicon, 7.62x45, and something better than the milsurp MG rounds I have for 7.62x54R and 8mm. I'm also contemplating reloading 5.7x28. As far as pistols are concerned, probably only .500 S&W and .44 Special/.44 Magnum.

    Anyway, I would like opinions on which reloader to purchase, which tools are necessities, which tools are nice to have, and any other helpful suggestions on getting started.

    I apologize in advance if there is a sticky for this topic - I was not able to find it by doing a search.

    Thanks in advance...
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member Skip's Avatar
    Join Date
    Mar 2009
    Last On
    03-26-2024 @ 11:40 AM
    Posts
    234
    Local Date
    03-29-2024
    Local Time
    07:55 AM
    I started off reloading with a plastic hammer. Simple to use an inexpensive.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member WarPig1976's Avatar
    Join Date
    Jan 2013
    Last On
    01-30-2023 @ 05:49 PM
    Location
    Delaware county, PA just outside Philadelphia.
    Posts
    2,659
    Real Name
    Jeff
    Local Date
    03-29-2024
    Local Time
    06:55 AM
    Look into one of the starter kits, I bleed green so may I suggest RCBS. They're your best bet and contain all the necessities including a manual except of coarse the dies, powder and primers, brass,bullets. You will need calipers and a way to trim brass and at least a tumbler to clean brass "these don't come in the kit".
    Nice to have stuff? There's soooo much out there you'll have to figure that out on your own, I'm eyeballing the RCBS loadmaster combo...

    Let me add this, You'll find there's more then one tool to do the same job, you'll have to decide which is best for you.
    Last edited by WarPig1976; 07-31-2014 at 05:46 PM.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    Bzuefishx's Avatar
    Join Date
    Jul 2014
    Last On
    08-02-2014 @ 01:48 PM
    Location
    Alaska
    Posts
    8
    Local Date
    03-29-2024
    Local Time
    03:55 AM
    Thread Starter
    Skip - that certainly is basic, but guessing it's a good way to learn the fundamentals.

    Warpig - any reason why RCBS? I've noticed reloaders tend to be very brand loyal.

    Thanks...

  7. #5
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 12:49 AM
    Location
    Victoria BC
    Posts
    29,839
    Real Name
    Jim
    Local Date
    03-29-2024
    Local Time
    04:55 AM
    Warpig got it in one I'd say. The cheap brands like Lee are just that. The RCBS has everything you need and won't wear out. We go through this discussion every once in a while and you can either check back in these threads or just wait a minute and we'll do it all over again here... Simple, Lee is cheapest, RCBS is mid range and Dillon is expensive. I have representatives from all here, shotgun is Lee, single stage is RCBS and progressive in Dillon. Many that preach cheap don't load huge amounts. But you have to start somewhere. Time will show you what you need, once you get it going.
    Regards, Jim

  8. #6
    Legacy Member WarPig1976's Avatar
    Join Date
    Jan 2013
    Last On
    01-30-2023 @ 05:49 PM
    Location
    Delaware county, PA just outside Philadelphia.
    Posts
    2,659
    Real Name
    Jeff
    Local Date
    03-29-2024
    Local Time
    06:55 AM
    Quote Originally Posted by Bzuefishx View Post
    any reason why RCBS?
    What BAR said sums it up.

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    Gun Surfer's Avatar
    Join Date
    Mar 2009
    Last On
    04-19-2016 @ 08:20 PM
    Location
    USA
    Posts
    247
    Local Date
    03-29-2024
    Local Time
    06:55 AM
    First you need good manuals. Lyman Reloading latest edition is excellent. Also Hornady, Sierra, Hodgdon, generic by caliber, various versions out there. Lots of reliable published load data available on line, but you need a manual for learning. Also best to get someone who you know into reloading to help show you the ropes. In AK I would not think that a problem.

    Brass preparation:
    Primer pocket cleaner - I use one you can stick in electric drill chuck
    Primer pocket uniformer -
    Tumbler - I use Lyman Turbo, you can also get a wet tumbler with different media
    tumbling media
    media separator
    media polish - if you use walnut or corn cob. I prefer corn cob for most routine jobs.

    Press:
    Single Stage Press - I recommend single stage RCBS Rockchucker for all around use and durability. Choice depends on anticipated shooting and amount. Rock Chucker is good all around choice for a beginner. It last a lifetime, still use mine.

    Sizing and bullet seating:
    Case lube (rifle only)
    Dies, RCBS or Redding, Lee are also a cheaper option
    shell holders

    Priming:
    Hand priming tool - Lee, Sinclair Intl. more expensive, RCBS, others. For best leverage, may just use the priming tool that comes with the reloading press.

    Calipers - Dillon's steel calipers are excellent for the price

    Case gages for rifle calibers - especially for shooting semi auto, these are a safety item. You will find them in the normal calibers. For cases that headspace on rim like 7.62x54R you dont need a case gage.

    Deburring tool
    Case Trimmer - LE Wilson Case Trimmer, available at places like Sinclair Intl, with the cylindrical steel case holders by caliber is the best in my view, but other collet types available too are decent.

    Powder dispensing:
    Loading blocks
    Powder measure - I use RCBS Uniflow with baffle, many others out there.
    Powder measure stand
    Powder funnel
    Electronic scale - I use RCBS Range Master, excellent accuracy, stability and calibration
    Last edited by Gun Surfer; 08-02-2014 at 03:45 PM.

  10. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    villiers's Avatar
    Join Date
    Jul 2008
    Last On
    01-08-2017 @ 08:32 AM
    Location
    xxxxxxxxxxxxxxxxx
    Posts
    1,084
    Real Name
    xxxxxxxx xxxxxxxxx
    Local Date
    03-29-2024
    Local Time
    02:55 PM
    There seem to be two approaches to reloading. (a) The mass production method and (b) The "precision" approach. Which type you go in for would depend on your own preference. I have been told that Dylon is the monopoly manufacturer of large scale reloading equipment (their products are well advertised online) and this method is usually preferred by shooters who use large amounts of ammunition. The second category is divided up between a number of manufacturers and your choice would depend on how precisely you intend to re-load. Among the best are Wilson and Forster Precision. Re-loading die sets also vary according to the degree of precision required. Personally, if starting fron scratch, I´d choose moderately priced equipment and move on with experience gained.
    Last edited by villiers; 08-04-2014 at 02:42 AM.

  11. #9
    Advisory Panel Parashooter's Avatar
    Join Date
    Dec 2008
    Last On
    Today @ 01:23 AM
    Location
    Connecticut
    Age
    79
    Posts
    677
    Local Date
    03-29-2024
    Local Time
    07:55 AM
    I'll second that. The low-price stuff (Lee, mostly) is just fine for a beginner - and much of it does good work for us old hands, too.

  12. #10
    Legacy Member TDH's Avatar
    Join Date
    Mar 2009
    Last On
    05-16-2021 @ 09:14 AM
    Posts
    752
    Real Name
    Tom
    Local Date
    03-29-2024
    Local Time
    06:55 AM
    Quote Originally Posted by Skip View Post
    I started off reloading with a plastic hammer. Simple to use an inexpensive.
    yeah so did I and I keep those sets around to remind me why I don't do it that way anymore.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. L39A1 advice for a beginner if possible please.
    By jss in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 14
    Last Post: 08-06-2022, 06:06 AM
  2. Reloader-17 and 4350
    By Calfed in forum Ammunition and Reloading for Old Milsurps
    Replies: 0
    Last Post: 01-17-2014, 12:33 PM
  3. Reloader-17 and 4350
    By Calfed in forum Swiss Rifles
    Replies: 0
    Last Post: 01-17-2014, 12:33 PM
  4. 7.62x54r Lee Reloader
    By mcgimp in forum Ammunition and Reloading for Old Milsurps
    Replies: 6
    Last Post: 12-20-2013, 12:00 AM
  5. A rifle/revolver question for a beginner
    By gunner in forum Black Powder
    Replies: 13
    Last Post: 09-14-2009, 10:52 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks