+ Reply to Thread
Results 1 to 9 of 9

Thread: 1903a3 remove windage knob help

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    RCEMERalf's Avatar
    Join Date
    Feb 2012
    Last On
    12-15-2015 @ 03:53 PM
    Location
    Lake Shores of NE Greater Detroit, MI, USA
    Age
    78
    Posts
    155
    Local Date
    03-28-2024
    Local Time
    09:17 PM

    Question 1903a3 remove windage knob help

    See lots of base removal information. Windage knob has a small set screw which does not want to come loose. Does this engage a flat on the windage screw? Is it full size or head with reduced diameter shank? Can the windage knob be pried off without damaging the transverse windage screw ? Might have to drill it out? Thanks.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    07:17 PM
    Here's an exploded pic I found to maybe help you.
    Regards, Jim

  4. Thank You to browningautorifle For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member Calif-Steve's Avatar
    Join Date
    Mar 2009
    Last On
    10-01-2023 @ 12:52 AM
    Posts
    2,508
    Local Date
    03-28-2024
    Local Time
    09:17 PM
    You will need a very small, but strong screwdriver to get that small set screw out. Soak it with a good penetrant, take your time. The set screw will come off, but take your time. You will likely damage the knob and other parts if you try to force it off. Good luck.

  7. #4
    Advisory Panel Chuckindenver's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 12:38 PM
    Location
    Denver Co
    Age
    61
    Posts
    3,152
    Real Name
    chuck
    Local Date
    03-28-2024
    Local Time
    08:17 PM
    they are usually staked in place
    warpath metal finishing contact info.
    molinenorski@msn.com
    720-841-1399 during normal bus, hours.

  8. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    RCEMERalf's Avatar
    Join Date
    Feb 2012
    Last On
    12-15-2015 @ 03:53 PM
    Location
    Lake Shores of NE Greater Detroit, MI, USA
    Age
    78
    Posts
    155
    Local Date
    03-28-2024
    Local Time
    09:17 PM
    Thread Starter
    Thanks guys. Helpful info appreciated.

  9. #6
    Legacy Member Calif-Steve's Avatar
    Join Date
    Mar 2009
    Last On
    10-01-2023 @ 12:52 AM
    Posts
    2,508
    Local Date
    03-28-2024
    Local Time
    09:17 PM
    How has the project gone? Just my $.02, but I have not seen a staked in sight, yet. But they are always in very tight.

  10. #7
    Advisory Panel Chuckindenver's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 12:38 PM
    Location
    Denver Co
    Age
    61
    Posts
    3,152
    Real Name
    chuck
    Local Date
    03-28-2024
    Local Time
    08:17 PM
    the set screw is staked in place...
    warpath metal finishing contact info.
    molinenorski@msn.com
    720-841-1399 during normal bus, hours.

  11. #8
    Legacy Member m1903rifle's Avatar
    Join Date
    Mar 2009
    Last On
    03-04-2024 @ 02:45 PM
    Location
    Knoxville,TN
    Age
    79
    Posts
    376
    Local Date
    03-28-2024
    Local Time
    09:17 PM
    +1 What chuckindenver said

  12. #9
    Legacy Member Randy A's Avatar
    Join Date
    Mar 2009
    Last On
    02-07-2024 @ 10:12 PM
    Posts
    247
    Local Date
    03-28-2024
    Local Time
    07:17 PM
    The way they're staked looks like an extension of the screw slot. Use a small diamond point chisel to clean the upset material out. Works every time, doesnt look bad and all reusable. The screw tip enters a hole drilled in the tip of the pinion. No, don't try to pry it off.
    Could also select a slightly larger drill bit too.
    Last edited by Randy A; 10-30-2014 at 10:20 PM.

+ Reply to Thread

Similar Threads

  1. To remove or not to remove rust on a luger
    By Mudhut in forum Other Military Service Pistols and Revolvers
    Replies: 23
    Last Post: 10-21-2011, 05:24 PM
  2. Broken off windage adjustment knob on No.1 Mk.III - options?
    By spinecracker in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 5
    Last Post: 01-18-2011, 05:48 PM
  3. Pinion and Windage Knob ID
    By Greg V in forum M1 Garand/M14/M1A Rifles
    Replies: 1
    Last Post: 06-13-2010, 01:03 PM
  4. Inside the windage knob
    By dryheat in forum M1 Garand/M14/M1A Rifles
    Replies: 4
    Last Post: 07-23-2009, 04:56 PM
  5. HRA windage knob question?
    By Bear57 in forum M1 Garand/M14/M1A Rifles
    Replies: 7
    Last Post: 04-02-2009, 04:24 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks