+ Reply to Thread
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 27

Thread: hi there, a differen type of HT low mount and history??

Click here to increase the font size Click here to reduce the font size
  1. #11
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    06:31 PM
    Why don't you just close-up photograph the areas where the numbers would have been and let the forumers try to decipher them against known records. It's called THE WISDOM OF THE CROWD. That's what's important to the blokes who want/need to know! Photos of the odds and sods are all very well but.........

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #12
    FREE MEMBER
    NO Posting or PM's Allowed
    2pounder's Avatar
    Join Date
    Aug 2015
    Last On
    09-26-2015 @ 08:36 PM
    Location
    australia
    Posts
    10
    Local Date
    03-29-2024
    Local Time
    02:01 AM
    Thread Starter
    will endeavour to take some better quality photos tomorrow and post here will include all detail that I can.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #13
    FREE MEMBER
    NO Posting or PM's Allowed
    2pounder's Avatar
    Join Date
    Aug 2015
    Last On
    09-26-2015 @ 08:36 PM
    Location
    australia
    Posts
    10
    Local Date
    03-29-2024
    Local Time
    02:01 AM
    Thread Starter
    Attachment 65029Attachment 65030Attachment 65031Attachment 65032Attachment 65033Attachment 65034Attachment 65035

    some more photos, are these helpful in identifying the rifle, the date stamp on the barrel is partly obscured by the front mount, 9 4?.
    all scop numbers and mounts are the same, hand engraved "RIFLE" faint but visible on scope but number is almost gone I will need a magnifying glass.
    Are there other photos I could take that would help with ID?

  6. #14
    FREE MEMBER
    NO Posting or PM's Allowed
    2pounder's Avatar
    Join Date
    Aug 2015
    Last On
    09-26-2015 @ 08:36 PM
    Location
    australia
    Posts
    10
    Local Date
    03-29-2024
    Local Time
    02:01 AM
    Thread Starter
    Attachment 65037Attachment 65038Attachment 65039Attachment 65040Attachment 65036Attachment 65041

    some more photos including the peening

    The number 5 is underneath the bolt handle on the action

  7. #15
    Advisory Panel Son's Avatar
    Join Date
    Oct 2006
    Last On
    03-26-2024 @ 07:30 AM
    Location
    On the right side of Australia, below the middle and a little bit in from the edge.
    Posts
    1,239
    Local Date
    03-29-2024
    Local Time
    03:31 AM
    Hi 2pounder.

    I have been through my spreadsheets and cross referenced your rifles available details with my lists and narrowed the serial number down to the list below. Best hope at the moment is to take hi res close ups of the peined areas where the serials used to be in hope of making out a digit or two in the blown up image and matching it to one on the list. Also, the hand etched markings on the scope tube will be "RIFLE # xxxxxx" Maybe a hi res pic of that area in good light will show up part of the number. Just for $hits and giggles, have a look at the underside of the rear sight leaf. They were not usually numbered, but I am pretty sure I have seen some that are.
    Your rifle displays all the signs to be a genuine HT. Except for the foreend mods and absence of the front handguard and nosecap it looks to be true and correct. There are about a dozen BSA receiver rifles in the 200-odd I have gathered details on, including two others from 1908

    Serial number possibilities.....
    32981
    39926
    45611
    46247
    53284
    54427
    57845
    64174
    74545

    5322A
    26562
    26824
    42031
    42670
    45828
    2011
    19435
    20063
    20719
    25534
    30850



    58798
    64852
    82663
    83837
    84486
    2137
    4285
    9984
    36923
    44511
    69911


    For your reading, here is my "canned" history of the Lithgow HT rifles.

    HT Brief History.
    In 1944 production to fill an order for 2500 telescopic sight SMLE sniper rifles was begun. The order was for 1250 Highmount or “Medium Bracket” and 1250 Lowmount or “Short Bracket” rifles. The scopes, made in Melbourne by A.O.C, (Australianicon Optics Co) were fitted with rings and base mounts, and supplied as an assembly matched and numbered together.
    The vast majority of the rifles were converted from WW1 manufactured rifles. The reason was that they "flexed better due to superior metalurgy". Also the machining tolerences in the actions were tighter originally making them easier to work into an individually fitted and finished unit for accuracy. There have been quite a few Britishicon made rifles noted as having been converted, as well as a number of WW2 vintage Lithgows. At the outbreak of WW2, civilian rifle club members were asked to hand in their rifles for the war effort. This is how a lot of already heavy barrelled and bedded WW1 Lithgows came to be in store at the factory
    Roughly the process was- inspect the rifle and gauge all parts. Any parts that were within the tolerances set for the HT could be kept. (this is why some civilian range rifles that were handed in at the start of the war could have retained older H barrels, walnut or Queensland maple fore-ends etc). Any parts that were replaced were not needed to be numbered to the rifle as there was a standing order that the HT's were not to be stripped with any other rifle on the bench- no chance of mixing parts on re-assembly. (quite a lot have un-numbered bolts, nosecaps, rear sights etc...) Bolts were lapped to the action, the heavy barrels were fitted and the fore-ends relieved and bedded to the actions. Then they were proof fired, bolt lugs checked again and re-headspaced. They were then tested for accuracy using the standard sights. Any that failed were returned and re-worked (bedded) and tested again. After passing accuracy testing they were machined for the scope mount bases. A numbered scope "set" was fitted (these were used in very close to numerical order as the rifles were made) and re-tested for accuracy. If passed the scope was engraved with the rifle serial number and the finished units were boxed in pairs and sent to store. After a certain date (escapes me at the moment) the cheekpiece (and front triggerguard screw swivel) were added to the job, but not fitted properly. This was to be done at unit armourer level to suit the individual sniper if needed. The rifles already in store had a cheekpiece and screws as well as the swivel tossed into the box.
    At the end of WW2, production was cancelled with only 1612 units completed. 1131 Highmounts were done first, then production had switched to Lowmounts in July ’45, completing 481 before cancellation. The total scope production had apparently been complete long before this, so there was most likely nearly 900 left over. 100 of these were used during the FTR, some may have been used as replacements for rifles in service, and a lot were sold off through the gun trade.
    During the early fifties, 100 rifles were taken from storage and went through FTR (Factory Thorough Repair) as an exercise for the tradesmen at the factory. All were fitted with scopes from the left-over production, all lowmount.
    There have been a number of HT’s come to light that have been re-wooded with authentic parts and fitted with new ’53 dated barrels. It is widely thought that these had seen service in Korea and were refurbished at Base Workshop level on return because the harsh climatic conditions had left the rifles in a poor state.
    When the rifles were sold off, quite a lot were delivered or handed out straight from the crate. Being boxed in pairs, with scopes off the rifles in their cases, there was a fifty fifty chance of being given the right scope and case for the rifle. This may have been when a lot ended up with miss-matched scopes.
    A lot of HT’s were sold to rifle club members who usually removed the optics and fitted aperture sights. This would help explain the number of scopeless rifles, rifleless scopes and miss-matched sets.

  8. The Following 8 Members Say Thank You to Son For This Useful Post:


  9. #16
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 11:07 AM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    09:31 AM
    Quote Originally Posted by 2pounder View Post
    the bolt handle
    They definitely wanted this number unreadable.
    Regards, Jim

  10. #17
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    06:31 PM
    The problem with centre punched numbers is that they remain illegible forever. Even when forensically examined due to the total destruction of the striations within the steel. Why don't these fraudsters, criminals, cheats and other ner-do-wells just linish the numbers out and then the metallurgists can read the former striation imprints and come up with the stolen engines - and in this case, the rifle number!

    I knew Son would come up trumps. Or certainly partly trumps here........... Top of the class Brad!

  11. Thank You to Peter Laidler For This Useful Post:

    Son

  12. #18
    FREE MEMBER
    NO Posting or PM's Allowed
    2pounder's Avatar
    Join Date
    Aug 2015
    Last On
    09-26-2015 @ 08:36 PM
    Location
    australia
    Posts
    10
    Local Date
    03-29-2024
    Local Time
    02:01 AM
    Thread Starter
    Thankyou so much for this information. Really enjoyed the process of becoming a forum member. Every time my father came over I would get this rifle out and show him, he loved it. After recently joining the BGRC I have reacquainted myself with this rifle after being exposed to some lovely lee- speeds. The HT as it is points beautifully and is quick to the shoulder. Either scope or open sights come into alignment easily and it is a nice weight to carry with good balance................a great hunting rifle, although I have not hunted with it.
    I can imagine something like it being used in early African days.

    Very much appreciated the heads up Son and will endeavour to look even more closely after a short trip to the east coast.
    I will definitely keep you posted and try for some more photos.
    As a matter of interest while looking the other night with the magazine out I noticed some brass shim in the bedding area behind the magazine, will send photos also.
    The stock has a filled hole on the underside for end and what appears to be some small letter stamps in stock just ahead of magazine also on underside.

    If I wasn't so busy tonight I would have it out to look under the rear sight. maybe tomorrow.

    Thanks again and appreciation for igniting my enthusiasm.

    Keep as is or source full wood and nose cap???? would need complete stock and any thing else you think missing. would be good to see it as it was, will never part with stock on it though.

  13. #19
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    06:31 PM
    Return it to as it originally was. The original fore-end is pretty-well worthless unless it has some sentimental to you.

  14. #20
    Advisory Panel Son's Avatar
    Join Date
    Oct 2006
    Last On
    03-26-2024 @ 07:30 AM
    Location
    On the right side of Australia, below the middle and a little bit in from the edge.
    Posts
    1,239
    Local Date
    03-29-2024
    Local Time
    03:31 AM
    The filled hole on the underside of the foreend will be where the inner band screw was when it was a standard rifle. The HT had the heavy barrel fitted and this did away with the inner band, so the screw hole was filled with a cedar plug.

  15. Thank You to Son For This Useful Post:


+ Reply to Thread
Page 2 of 3 FirstFirst 1 2 3 LastLast

Similar Threads

  1. GPGM "B" type vehicles mount
    By pzluchs in forum Milsurps General Discussion Forum
    Replies: 5
    Last Post: 05-26-2015, 07:12 AM
  2. Replies: 4
    Last Post: 03-27-2014, 09:48 PM
  3. Replies: 10
    Last Post: 07-26-2012, 01:25 PM
  4. derf's nambu type 14 pistol and type 99 7.7 arisaka
    By DERF in forum Japanese Rifles
    Replies: 2
    Last Post: 07-19-2010, 09:10 PM
  5. Non-T type(No.4) scope mount picture request, pretty please??
    By three0three in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 14
    Last Post: 04-18-2010, 06:15 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks