Winchester I Cut Highwood Stock Repair

**frankderrico** · 09-17-2015 12:38 PM

This is an example of the work I've done recently. This is a beautiful Winchester I-Cut Highwood stock that had a big chip missing from the recoil plate area. Pictures show the before and after of the repair. Hope you all enjoy it, more to come.

Best Regards.....Frank

Attachment 65513 Attachment 65514

Information

Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.

**Highly Recommended** · 09-17-2015 12:38 PM

A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered. Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping. In the USA shipping is $5.00 for media mail. I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!). CLICK BANNER to send me a PM for International pricing and shipping.

Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles.

Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons

Specializing in premium ammunition and reloading components.

Your source for the finest in High Power Competition Gear.

Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.

**Rustship** · 09-17-2015 07:29 PM

Again, very Nice work Frank !

**JimF4M1s (Deceased)** · 09-17-2015 09:40 PM

Frank, as always nice work.

**Bruce McAskill** · 09-17-2015 10:07 PM

Yup a job well done Frank.

Thread: Winchester I Cut Highwood Stock Repair

Thread Tools

Search Thread

Display

Winchester I Cut Highwood Stock Repair

The Following 8 Members Say Thank You to frankderrico For This Useful Post:

Thank You to Rustship For This Useful Post:

Thank You to JimF4M1s (Deceased) For This Useful Post:

Thank You to Bruce McAskill For This Useful Post:

Similar Threads

Winchester S/N Range for I Cut and Oval Cut Highwood Stocks?

M1A1 highwood stock

Highwood Stock Repair

RMC I cut Highwood repair

Tags for this Thread

Posting Permissions