+ Reply to Thread
Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 35

Thread: Removing Cosmolene

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Cantom's Avatar
    Join Date
    Oct 2006
    Last On
    05-24-2021 @ 08:44 AM
    Location
    Ontario Canada
    Posts
    411
    Real Name
    Tom
    Local Date
    03-28-2024
    Local Time
    05:22 PM

    Removing Cosmoline

    I was just asked about removing cosmolineicon, and it brings back bad memories...(shudder) I do hate that stuff...

    I found this very entertaining article about removing "The Brown Menace".

    http://www.surplusrifle.com/shooting...line/index.asp

    Is there any way to save this whole article to the Milsurp Knowledge Libraryicon, as I believe the owner of that site has cancer and those articles will cease to exist. I wonder how he's doing btw, I hope well.

    For a perfect example of a nice coat of cosmo, see this ad.
    https://www.milsurps.com/showthread.php?t=837


    BTW, I tried correcting the spelling of cosmoline, and managed to in here, but for some reason the wrong spelling still shows on the forum- I wish we could edit our own mistakes out.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by Cantom; 03-01-2007 at 12:38 PM.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Senior Moderator
    (Founding Partner)


    Site Founder
    Claven2's Avatar
    Join Date
    Oct 2006
    Last On
    08-09-2023 @ 10:17 PM
    Location
    Scandaltown, Ontario
    Posts
    3,242
    Real Name
    Ronald
    Local Date
    03-28-2024
    Local Time
    04:22 PM
    Surplusrifle.com is no longer going to go offline. It's under new administration courtesy of their forum admin ppl who ponied up some dough to keep it up.

    As for removing cosmolene, bar none, the best method is a vasol parts washer. Granted, we don't all have access to one. I have tried many other solutions, but I find the best solution is to use varsol soaked paper towel. Wear rubber gloves and do it in a well ventilated area. I also use an assortment of toothbrushes, dental pics and brass scrapers to do the deed
    Союз нерушимый республик свободных Сплотила навеки Великая Русь. Да здравствует созданный волей народов Единый, могучий Советский Союз!

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member Cantom's Avatar
    Join Date
    Oct 2006
    Last On
    05-24-2021 @ 08:44 AM
    Location
    Ontario Canada
    Posts
    411
    Real Name
    Tom
    Local Date
    03-28-2024
    Local Time
    05:22 PM
    Thread Starter
    Quote Originally Posted by Claven2 View Post
    Surplusrifle.com is no longer going to go offline. It's under new administration courtesy of their forum admin ppl who ponied up some dough to keep it up.

    As for removing cosmolene, bar none, the best method is a vasol parts washer. Granted, we don't all have access to one. I have tried many other solutions, but I find the best solution is to use varsol soaked paper towel. Wear rubber gloves and do it in a well ventilated area. I also use an assortment of toothbrushes, dental pics and brass scrapers to do the deed
    Oh, I've done the varsol thing too...but reading that link, that steamer idea sounds like the way to go, if I have to do it again I'll be trying that.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    BRAMEL's Avatar
    Join Date
    Nov 2006
    Last On
    @
    Location
    Barrie, Ontario
    Posts
    38
    Local Date
    03-28-2024
    Local Time
    05:22 PM
    I just use my tea kettle......Boiling water, really melt the ole yellow/brownish snot.

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    mudpuppy's Avatar
    Join Date
    Oct 2006
    Last On
    07-15-2016 @ 03:56 AM
    Location
    Calgary, Alberta
    Posts
    5
    Local Date
    03-28-2024
    Local Time
    03:22 PM
    The steamers work really well and are cheap if you buy them at liquidation stores. The one I use was only $25 and comes with a bunch of attachments that let you concentrate the steam in confined areas.

    It takes about 20 minutes to completly strip a rifle of cosmo with one, it just melts off and you don't have to deal with varsol fumes.
    They also come in handy when you are trying to steam out dents in a stock.

  8. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    Dante's Avatar
    Join Date
    Feb 2007
    Last On
    04-26-2011 @ 07:19 AM
    Location
    Eastern Ontario
    Posts
    38
    Local Date
    03-28-2024
    Local Time
    05:22 PM

    Today was the day....

    I completely stripped the No.4 and tried hot water...NO! So, I then tried hot water and a rag with varsol....NO...limited success but still sticky. Then I put a big pot of water on to boil and immersed all of the metal bits as well I donned rubber gloves and used boiling water to wash the wood. Lots of work but it is done now. Metal lubed and wood oiled.....a work of art. Thanks for the help....
    Dave

  9. #7
    Moderator
    (Edged Weapons Forum)
    sdh1911's Avatar
    Join Date
    Oct 2006
    Last On
    02-23-2016 @ 03:41 PM
    Location
    Stanhope, New Jersey
    Age
    67
    Posts
    927
    Local Date
    03-28-2024
    Local Time
    04:22 PM
    I've been using hand cleaner lately, works pretty good for the thin stuff. As for the thick stuff, mineral oil and or diesel fuel and a scrub brush works well. You may wish to use vinyl gloves while you indulge HTH-SDH

  10. #8
    Legacy Member Maple_Leaf_Eh's Avatar
    Join Date
    Feb 2007
    Last On
    02-24-2024 @ 11:51 PM
    Posts
    252
    Local Date
    03-28-2024
    Local Time
    04:22 PM
    Engine degreaser and hot tap water. Let it run until you are getting the really hot stuff from the tank. The solvent will soften the goo, and the hot water will float it away. Be sure to reapply the oil as soon as you are done. Slobber it on. I leave things disassembled for a day so the wood won't get re-soiled with oil. And this gives you time to apply the linseed oilicon to the stock.

  11. #9
    Legacy Member Cantom's Avatar
    Join Date
    Oct 2006
    Last On
    05-24-2021 @ 08:44 AM
    Location
    Ontario Canada
    Posts
    411
    Real Name
    Tom
    Local Date
    03-28-2024
    Local Time
    05:22 PM
    Thread Starter
    Quote Originally Posted by Maple_Leaf_Eh View Post
    Engine degreaser and hot tap water. Let it run until you are getting the really hot stuff from the tank. The solvent will soften the goo, and the hot water will float it away. Be sure to reapply the oil as soon as you are done. Slobber it on. I leave things disassembled for a day so the wood won't get re-soiled with oil. And this gives you time to apply the linseed oilicon to the stock.
    No sooner did I bring this up than I just bought a 42 Long Branch rifle today that is infested with the brown menace...I guess I'll be looking at steamers...I'd rather avoid using smelly chemicals around the house. This'll be the first time I've done this in over 15 years.

  12. #10
    Senior Moderator
    (Founding Partner)


    Site Founder
    Claven2's Avatar
    Join Date
    Oct 2006
    Last On
    08-09-2023 @ 10:17 PM
    Location
    Scandaltown, Ontario
    Posts
    3,242
    Real Name
    Ronald
    Local Date
    03-28-2024
    Local Time
    04:22 PM
    It's not that big of a deal. Using just varsol and paper towel and a few implements, even if I'm REALLY picky, it only takes me an evening to detail strip and clean a rifle in cosmolene. It's messy though, prepare for that.
    Союз нерушимый республик свободных Сплотила навеки Великая Русь. Да здравствует созданный волей народов Единый, могучий Советский Союз!

+ Reply to Thread
Page 1 of 4 1 2 3 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks