Webley Mark V .455 plated
Guys,
I am in need of an education from the experts. I know VERY little about the Webley revolvers. However, I have a friend who just asked me to follow up, and get some information on it. The handgun is a Mark V in .455. It is serial number 148,xxx. The barrel/ frame and cylinder match. He asked me not to post the serial number, so I am simply passing on his wishes.
Here is the overall view of the gun in question:
https://www.milsurps.com/images/impo...bleys002-1.jpg
First off, we will examine the Patent date on the frame:
https://www.milsurps.com/images/impo...bleys003-1.jpg
I believe in this photo, that there is a screw missing? The opposite side has a screw, but it doesn't appear to go all the way through.
The backstrap on the handgun has a clear stamp of: 3/15.
https://www.milsurps.com/images/impo...bleys014-1.jpg
Next up is the Model designation and assorted Brit proof marks.
https://www.milsurps.com/images/impo...bleys004-1.jpg
Overall Brit marks with some chrome plating wear off.
https://www.milsurps.com/images/impo...bleys005-1.jpg
It has not been rechambered. I can't seem to get the extractor to raise out of the cylinder. I checked and it is loose.
https://www.milsurps.com/images/impo...bleys011-1.jpg
Here is the firing pin/ face.
https://www.milsurps.com/images/impo...bleys010-1.jpg
Next we will look at the lanyard ring/ pommel:
https://www.milsurps.com/images/impo...bleys007-1.jpg
Both are plastic, one is chipped, and the screw doesn't go all the way through to the opposite grip.
Next set of pics are just random for your enjoyment:
https://www.milsurps.com/images/impo...bleys015-1.jpg
https://www.milsurps.com/images/impo...bleys016-1.jpg
https://www.milsurps.com/images/impo...bleys012-1.jpg
https://www.milsurps.com/images/impo...bleys009-1.jpg
I did notice that at least 1 screw does not match holding the trigger guard in place. I also noticed that when cocking the pistol, the cylinder is slightly out of time. Is this a major problem?
The plating is flaking off, and I observe pits under the chrome. What is going on with this handgun?:o
Is this a model that is collected, or is this a bubba'd revolver? Please let me know what you think.... honesty is fine... :cheers:
Newly acquired Mk VI .455
Hello,
British handguns are not my specialty, but I have had an Enfield revolver in 38/200 dated 1934 and marked to the RAF for years which I enjoy shooting. Recently I was offered a chance to buy a Webley Mk.VI with a WWI holster. I bit.
In looking the weapon over, I have noticed it is not marked either Webley or Enfield and has a serial number taking it outside Webley production. The serial number is 49** and appears on the frame, barrel, and cylinder. The cylinder is not cut for .45ACP. The weapon has proofs on each chamber of the cylinder and Enfield inspector marks on the holster guide. There is a "23 on the barrel and a number of marks struck over on the metal of the backstrap and a date (I think) 3.40. Pristine bore and cylinders, good timing, a couple of mildly wallowed screw heads...The holster is not marked in any way except for a name Sanderson.
I got both for $650. Can anyone help me with the identification of this weapon. It has so few marks as opposed to most British weapons. I think Enfield Lock made it as the serial number is within a range for their production for 1923. I will try and post some photos as soon as I am able.
Any thoughts about this revolver and its acquisition will be appreciated. Many thanks!
