Need load for 147FMJ in 03A3

I just picked up some 147gr. Pull down bullets, 12.5 cents each :D
What would come close to duplicating Milsurp ammo ?
What FPS am I looking for ?
I have 3031, Varget and H-335

You are looking for about 2,700 - 2,800 fps for mil spec. I would guess Varget and then 3031, in that order. 3031 at one time was a popular powder for high power match shooting, so you may get some good ideas there.

Go to the Hornady web site and look up the load for Varget and a 150 grain bullet.

Or go with 4064. That is a very good powder that gives good accuracy, and small SDs.

With Varget the book calls for 51 grains max. I load mine at 47 grains and get very good results in my Smith Corona

You can find recommended loads to duplicate the M2 ball ammo on this website:http://web.archive.org/web/200006200...rpo/M1load.htm

I use that bullet with 45 gr. Varget. Easy load on me and rifle. Try 47-48 to match M2 load. Good luck.

Thanks
I'll give Varget a try

47 grains Varget +/- .1 grain