British proofed Garand.

I was at a friends house the other day and he pulled this Garand out of the safe to show me. It is a very nice IHC with British proofs. How did this rifle end up with British proofs being as how it's a post WWII rifle? I thought we only supplied Garands to Great Britain in WWII with the Lend Lease program.
https://www.milsurps.com/images/impo...04/00530-1.jpg
https://www.milsurps.com/images/impo...04/00134-1.jpg
https://www.milsurps.com/images/impo...04/00433-1.jpg
https://www.milsurps.com/images/impo...04/00234-1.jpg
https://www.milsurps.com/images/impo...04/00628-1.jpg
https://www.milsurps.com/images/impo...04/00723-1.jpg
https://www.milsurps.com/images/impo...04/00820-1.jpg
https://www.milsurps.com/images/impo...04/01215-1.jpg

British proof marking do not, in and of themselves, have anything to do with "Lend Lease". All the marking prove is that the gun in question was in Great Britain at one time and was, as required by British law, inspected, proofed and marked prior to leaving the country. In the 1950s big importers such as Interarmco (Interarms) had a warehouse in Great Britain and guns purchased thoughout the world were stored there. Prior to being exported to the U.S. all of these guns, be they M1 Garands, or a Colt SAA, had to be proofed prior to export.

when rifles leave the UK they need to be proofed IIRC

so at some point it was surplus and moved through the UK - not a lend lease rifle

from the GCA.org The Garand Collectors Association Glossary of Terms

A set of stampings required by British law on any firearm exported from England. The 1941 – 1942 Lend Lease rifles imported in the 1960’s carried these marks in the barrel date area, and later imports on the top of the barrel between the rings of the gas cylinder. Collectors generally dislike non-standard markings.

Note the 4th picture, the one that shows the 494" and the PR followed by the circle with numbers and letter. That circle is the "private view mark" that was used by Birmingham Proof House starting in 1975. Before 1975 they used crossed swords instead of a segmented circle. In either case the letter at 3 o'clock is always a "B" for Bermingham. The number at 6 o'clock, in this case a 1, is the seniority of the inspecter. The letter at 9 o'clock, in this case it looks to be a "D", would indicate that the year the rifle was proofed was 1978. They started with "A" in 1975 and progressed each year, so a "D" would be 1978. Seems like, they went back to marking the proof in the barrel date area as yours.

All firearms must pass through the proof house in England before commercial resale. The only exceptions I've seen were surplus Lee Enfield rifles of different varieties that had military proofs and were sold directly by MoD for export. I was told at the time that there was a bit of a "flap" over the fact those particular rifles didn't see the proof house before export. They were brought into the USA by Navy Arms in the early 1990's.

Very Interesting info, I know about the need for proofs on anything moving through GB but not what they meant.
Is there a data source that explains the range of proofs expanding on the post by 'Joe W'

Quote:

---

Originally Posted by gulliver62

Very Interesting info, I know about the need for proofs on anything moving through GB but not what they meant.
Is there a data source that explains the range of proofs expanding on the post by 'Joe W'

---

Good article by Scott Duff in the Apr. 2002 American Rifleman " Garands in the Kings Service". Also back issues of the GCA Journals, "British Marked Garands" by David Kaczmarek ( 1991) and also "The Lend-Lease Fallacy" by Bruce N. Canfield. I would say Scott Duffs article in the Rifleman should give you most of what you are looking for.

As to the meaning -- Crown over BNP = British Nitro Proof, 30/06 (caliber), 2.494 ( length of cartridge case in decimal ). 2nd line - 18 tonsper and the square is the pressure of the nitro proof charge in tons per square inch. This is calculated in long tons, or about 2,240 lbs, and yielded 40,320 lbs. per square inch by the British axial method, or about 50,000 psi by the American radial system. The last mark is the "Private View Mark". This information is all found in Scott Duffs article.
Keep in mind that this is the Birmingham Proof House markings. The proof markings done by the London Proof House were a bit different.