The early AR-15 barrels had a twist of 1:14, did they also have 6 grooves ?
Printable View
The early AR-15 barrels had a twist of 1:14, did they also have 6 grooves ?
See the table 2/3 the way down this page for barrel twist rates on various AR-15/M-16 models:
M16 rifle - Wikipedia, the free encyclopedia
My three digit is 1 : 12, and is six groove.
I think he's talking about the test pattern rifles.
Yes, 1/14" 6 groove, RH twist. early model 601 AR15 (full auto). Winchester made the barrels. The 601 had the early "duckbill" thin three prong FH and triangle charging handle, the 602 model had the beefed up three prong, the current design charging handle, and switched to a 1/12" twist.
Retro Black Rifle www.retroblackrifle.com
click on "Military Rifles" them click on "Military Components guide"
I suffer from RBRD (Retro Black Rifle Disease) I am finishing a 602 build.
Now you've done it! Your first post. Lurked successfully all this time (since 2008) and went and ruin't your streak! I only lurked for about two years- look what's happened to me!:madsmile:Quote:
Originally Posted by ohno
The early 601 barrels were made by Winchester, after that they were made by COLT. Some of the later Model 601s had 1/12 twist barrels.
See here:0Colt's USGI M16 series variation guide edition IV - AR15.COM
It's the part I am missing to make this one correct,(except of course the reciever)mine has an MP marked barrel.
https://www.milsurps.com/images/impo...06/00243-1.jpg
When I posted a photo of the barrel and carttridges I wanted to ask about the GB 73 headstamp on the 223 cartridges. Where these produced for the military or commerical market/or both ? Have these Greenwood & Batley 223 cartridges been around for a period of time ?Attachment 24132
Quote:
Originally Posted by RCS
Those particular ones? 1973
Correction on the manufacturer of the 223 cartridges with the GB headstamp, they are Chartered Industries of Singapore