trying to remove the lower stock off my 303 but it seems stuck at the receiver end - is there a trick to this - what am I missing - should just pop out but its not - anyone help
Printable View
trying to remove the lower stock off my 303 but it seems stuck at the receiver end - is there a trick to this - what am I missing - should just pop out but its not - anyone help
Hi ..... :)
I'm not exactly sure what the problem might be, but in case you don't already have them, perhaps download a complete set of manuals for the Lee Enfield from the MKL, which includes operating and armourer's maintenance instructions.
The manuals may be found in the Technical Articles for Milsurp Collectors and Re-loaders (click here)
2002 No.4 (All Marks) .303 Rifle Manuals (click here)
Complete Set includes:
- 2002 No.4 (All Marks) .303 Rifle Data Summary
- 2002 No.4 (All Marks) .303 Rifle Parts Identification List
- 2002 No.4 (All Marks) .303 Rifle Operating Instructions
- 2002 No.4 (All Marks) .303 Rifle Equipment Description
- 2002 No.4 (All Marks) .303 Rifle Maintenance Instructions
1991 No.4 (All Marks) .303 Rifle Manuals (click here)
Complete Set includes:
- 1991 No.4 (All Marks) .303 Rifle Operating Instructions
- 1991 No.4 (All Marks) .303 Rifle Maintenance Instructions
Note: The difference between the 1991 set of No.4 Manuals and 2002 No.4 (All Marks) .303 Rifle Manuals, is that the 1991 manual contains armourer's information on how to properly "bed" the No.4 rifle, whereas the newer 2002 manual does not.
Hope this helps... :)
Regards,
Doug
don't have them thank you very much
The butt fits into a tapered socket and it's just jammed into the taper. Make sure that the stock bolt is FULLY loosened. Tap it lightly left and right with a rawhide mallet and it'll loosen and come out