Printable View
See pics. Results in groups several inches right at 100 yards. Obviously I can use the windage on the ladder to compensate, but I'd prefer to have the front post dead center.
https://www.milsurps.com/images/impo...fb14ca_c-1.jpg
https://www.milsurps.com/images/impo...f1ebcd_c-1.jpg
https://www.milsurps.com/images/impo...98eb1f_c-1.jpg
Easy fix, either gently bend the blade straight with pliers resting the flat of the tip on the base or just replace the blade altogether.
When I adopted mine the blade was bent even worse being a cheap sob I just bent it,, good as new!
as i posted.....likely the barrel is out of index. take a picture of the left side of the receiver were the line is..
Say , Chuck ;
Shouldn't the sight base butt up against the turned shoulder ? Looks to me that someone fiddled with it and threfore had to recut the pin groove . Maybe he recut it wrong ? Maybe the correct cut is still under there.
Chris
Thanks chuck, I have found pics of the witness marks on the barrel and receiver I am looking for. I will take a pic as soon as I get home. Thanks!Quote:
Originally Posted by chuckindenver
---------- Post added at 10:18 AM ---------- Previous post was at 10:13 AM ----------
Just to add info, this target was 5-8 mph winds at 140 degrees from the shooter, 100 yards. The rear leaf had to be moved one mark left to even hit the paper.
https://www.milsurps.com/images/impo...9473ee_z-1.jpg
Am I the only one who thought the blade looks bent in the first picture?
One ah them thar "obstacle hullusions"......
I don't know, but it sure looks like the front sight stud is at an angle in relationship to the barrel centerline.
In the first picture, the front of the stud is slightly right of center and the rear is slightly left.
Have you tried a different front sight stud?
D. :cheers:
No, it is. The blade and stud scream "someone hit us" against something.Quote:
Originally Posted by WarPig1976
---------- Post added at 07:10 PM ---------- Previous post was at 07:09 PM ----------
Correct, the barrel and sight base centerline (with the dovetail cut) are parallel along the centerline. The sight base that fits in the dovetail cut is what is at an angle.Quote:
Originally Posted by Dad
no since in even wasting time guessing, until i see the witness marks..
Thanks Chuck. I really appreciate your willingness to take a look and dispense info to a newb like me!!
https://www.milsurps.com/images/impo...f0f086_c-1.jpg
https://www.milsurps.com/images/impo...75903d_z-1.jpg
Do I need to remove the rear sight collar?