Printable View
I bought a WW2 vintage Springfield M1 from a reputable dealer at a gun show recently. It has a early Marlin barrel I was told, so I wanted to check on top of the barrel for markings since there's none behind the op. Rod. I've tried a socket end, large Phillips head, I mean this thing is seized. Thanks.
Try a M10 cleaning handle with a rod section inserted in hole to form a T shape
Soak with penetrating oil also
Be sure no weld on gas cylinder from drill rifle
If a socket doesn't work, the M10 handle has no chance. WD40 and a longer handle on the ratchet (slip a pipe over it).
a.k.a= get a bigger hammer!!..:madsmile:Quote:
Originally Posted by bob seijas
Try heating with heat gun. Do not use flame. Heat gun - penetrating oil - heat - oil etc. heat will help oil to work its way in. Just don't overdo it. PATIENCE.
B
Apply a shot of PB Blaster which you can find at most NAPA stores. Let it sit overnight and it should break loose with much less effort. It's a penetrating catalyst and works much better than normal penetrant/oils like WD40.
I finally got it off by using some CLP and letting it soak for an hour. After taking off the other parts I noticed it has a 2nd contract Marlin barrel installed. The chamber is still in the WHITE. How rare were the Marlin barrels and were they of good quality? Thanks for the help.
Second contract Marlin barrels are not really rare or sought after and do not bring a premium.
Try shooting a couple of clips through it and it may break whatever hold is on it. You also might have to grab the front end in a protected jaws vise to hold it while you come on to it. Sometimes the hands aren't enough.
Marlin barrels were not known for their superb accuracy.
Jon