TM 9-1005-211-34 says the free length of the recoil spring should be approximately six and a half inches long. The springs in my Ithaca and Remington Rand are only six inches long. Which one is right?? TIA
Skip
Printable View
TM 9-1005-211-34 says the free length of the recoil spring should be approximately six and a half inches long. The springs in my Ithaca and Remington Rand are only six inches long. Which one is right?? TIA
Skip
Both.Quote:
Originally Posted by skip_c
In my armorer course materials it says, "Free length of spring must not be less than 6 inches. A flat appearance on either end of the half coil is not required."