My first T

Just picked up this '45 BSA (T) with '46 mk3 scope.
All matching except the forend at some point was replaced with what seems to be another T forend as there is a serial stamped in the usual spot at the front bottom.
Bore is shiny and optics are clear, should make a good shooter/collector.
Smle mag will be changed.

https://www.milsurps.com/images/impo...e0juqytg-1.jpghttps://www.milsurps.com/images/impo...9odzklid-1.jpghttps://www.milsurps.com/images/impo...6l53eegt-1.jpghttps://www.milsurps.com/images/impo...4pblltko-1.jpghttps://www.milsurps.com/images/impo...v3wyvlok-1.jpghttps://www.milsurps.com/images/impo...xiqqjywr-1.jpghttps://www.milsurps.com/images/impo...xld1pb1v-1.jpg

Also nabbed a no.32mk1/2 with Dalglish bracket.
Must have come off a sporter as the markings were removed and bracket filed down slimmer.
https://www.milsurps.com/images/impo...96m7e0ja-1.jpg

Thatr's not a Mk1/2, it's a standard Mk1 or 2 - or is that what you meant? It is simple to tell exactly which one

Quote:

---

Originally Posted by Peter Laidler

Thatr's not a Mk1/2, it's a standard Mk1 or 2 - or is that what you meant? It is simple to tell exactly which one

---

Yes that's what I meant, Mark 1 or 2.
Which do I have?

https://www.milsurps.com/images/impo...d3tkmn5y-1.jpg

Can you either take another photo with the range drum markings completely visible, or, turn the range drum, & if there are only two 'clicks' between each range setting (eg between 200 & 300 yds & between 500 & 600 yds) then you have a Mk1. If there are a number of clicks, which increase as you go up the range scale (with increasing distance), then you have a Mk2.

There are also intermediate (50 yd) range markings on the Mk2 drum, but only every 100 yds on the Mk1 (this supposes the drum is original, of course).

Hope this helps.

By the way, it is a relatively simple, but complicated job to resurrect your ground tube back to normal if you ever wanted it done.

Quote:

---

Originally Posted by Roger Payne

Can you either take another photo with the range drum markings completely visible, or, turn the range drum, & if there are only two 'clicks' between each range setting (eg between 200 & 300 yds & between 500 & 600 yds) then you have a Mk1. If there are a number of clicks, which increase as you go up the range scale (with increasing distance), then you have a Mk2.

There are also intermediate (50 yd) range markings on the Mk2 drum, but only every 100 yds on the Mk1 (this supposes the drum is original, of course).

Hope this helps.

---

Huge help thank you!
I'll get the pictures up tonight.

---------- Post added at 03:22 PM ---------- Previous post was at 03:19 PM ----------

Quote:

---

Originally Posted by Peter Laidler

By the way, it is a relatively simple, buy complicated job to resurrect your ground tube back to normal if you ever wanted it done.

---

I would absolutely want it done!
What's involved?
Do I send it to you? I'm in canada if that complicates things...

Only one click between range setting.
https://www.milsurps.com/images/impo...uhjwp5h2-1.jpghttps://www.milsurps.com/images/impo...uzw8pxr0-1.jpghttps://www.milsurps.com/images/impo...lk2suulc-1.jpghttps://www.milsurps.com/images/impo...9ubt65lr-1.jpghttps://www.milsurps.com/images/impo...gi1qncvp-1.jpghttps://www.milsurps.com/images/impo...azllrvr4-1.jpg

Possible serial of original rifle?
Plus a shot of the matching barrel serial.

Yep, the 'extra' scope is a Mk1 off (assuming the mutilated bracket is original to it) a 1943 BSA rifle, which sounds about right.

Super, thanks Roger!
Although neutered, this bracket should still be serviceable I hope.

Some one has had a right old go at that front bracket I surely doubt an armourer would bodge screw heads that badly and not get ripped for it probably a bubba......
Your scope serial is 11965 further up the food chain than my A K & S on my '44 M 47C