M1A scout scope mount

Printable View

05-15-2009, 08:18 PM
goo

M1A scout scope mount

anybody know where to get one of those mounts without buying the whole rifle?
it don't look like springfield sells them.

i'm lusting in my heart.
...
thx, goo

http://www.springfield-armory.com/as...ory_AA9126.pdf
05-16-2009, 09:46 AM
Ben Hartley

Scout-style Mount for M14/M1A

Goo...

Couple of places to try:

http://www.amegaranges.com/M14M1A.php

and

http://www.fulton-armory.com/

(You'll have to poke about a bit in the Fulton Armory M14/M1A parts list.)

HTH

Ben Hartley
05-16-2009, 02:39 PM
TDH

The Cmp sell a scout scope mount for $110. It is easy to mount and replaces the upper hand guard. Follow the instructions. mine seems to be very solid.
05-16-2009, 03:55 PM
TDH

Quote:

Originally Posted by TDH

The Cmp sell a scout scope mount for $110. It is easy to mount and replaces the upper hand guard. Follow the instructions. mine seems to be very solid.

I hope these pics work--1st the rifle https://www.milsurps.com/images/impo...100_0294-1.jpg

https://www.milsurps.com/images/impo...100_0336-1.jpg

https://www.milsurps.com/images/impo...100_0337-1.jpg

https://www.milsurps.com/images/impo...100_0338-1.jpg

https://www.milsurps.com/images/impo...100_0339-1.jpg
05-17-2009, 02:21 PM
goo

thanks alot ...great pics of a cool rifle... but i was looking for an m1a scout mount... not for the garand.
also, i got a stainless heavy barrel. don't look like the fulton one will fit.
anybody know for sure?
thx, goo
...
05-17-2009, 02:29 PM
Stevo

Ultimak makes a good M1A scout rail. Don't know if it will fit a heavy barrel.
05-17-2009, 10:03 PM
BDH

Not the same...but might work.

You may be able to find a substitute here...

http://cgi.ebay.com/UTG-M1A-SPRINGFI...1|293:2|294:50

I have one and have had to trim a bit from the rear so it doesn't bear against the receiver ring.

HTH

Bruce
05-18-2009, 11:22 AM
goo

thanks a lot!
goo
05-18-2009, 06:44 PM
Neal C.

I had the Amiga Ranges (same as CMP) on a Garand with a 10X IER Burris scope and it was great. These are only for normal contour barrels on either the M1 or M14, and the 10X Burris has been discontinued leaving the only choices in new scout scopes the 2.5X Leupold and Burris and some imports that aren't worth the trouble. I've tried the three point M14 scope mounts from all three of the "S" Companies and don't like them for a variety of reasons. Now on the M14 type rifles I only use the Bassett Machine single screw mount the way John Garand intended. Because of the unique way they draw down, they do not shoot loose or lose the zero, and even return very close to zero if removed and replaced. The small Bassett is great for compact scopes like the Burris 3X9 Full Field Tactical and the Picatinny Bassett handles the Long Range and MK4 Leupolds easily. Absolutely no ejection problems and the open sights are not obstructed, which makes sighting in the scope very easy. Just sand bag the rifle and adjust the scope cross hairs to the open sight point of aim. You won't be sorry if you buy a Bassett. I put mine on with some blue lock-tite at 50 inch-pounds and leave them there. You can get the bolt out with them on if you have to. Bassett SM14/M1A Scope Mount