Printable View
the style T barrels measure 1.25 at the breach. this one is 1.18
the sa507 would be under the barrel and just behind the scope holes
that rear tap hole was there when I got it, came with a nice base for the leopold I put on it
the stock covers half the holes for the lyman sight so if it was built in this configuration for comp. use it would be for a scoped match?? if?
which ones had the bolt etched? NM, NRA sporters or both?
chuck says its not in the DCM book
EversonExhaust:
I bought the 1903 that relics6165 is talking about. Its S/N is 1,516,604 and it had SA over 504 marked on the barrel at the 6 o-clock position under the front hand guard about 6 inches from the receiver. I am overseas right now so I cannot check out any measurements but I will send you pics or post them if you like.
red33wspc
yeah post up a pic ! I just realized my pics disappeared, oops. will re-post. is yours a heavy barrel?
EversonExhaust,
Here are a few pics. I looked at a list of serial numbers that was in the web for a while. they only have a few rifles that are close to you number:
1928 - 1285266 - 1305900
SA 1286892 HS 10-44
SA 1288237 SA 2-28 RIA made receiver -small circle under SN, flaming bomb on front of recoil lug (CSP 12/05)
SA 12885xx AV 12-18
SA 1290876 SA 6-28
RIA 1292983 SA 11-44 RIA Marked Receiver With SA S/N (CMP Auction)
RIA 1292993 SA 9-28 RIA Marked Receiver With SA S/N
RIA 1293237 SA 12-28 RIA Marked Receiver With SA S/N (CSP 10/08)
SA 1293xxx SA 2-29
SA 1294418 SA 3-29 RIA made receiver -small circle under SN, flaming bomb on front of recoil lug (CSP 12/05)
SA 129689x SA 3-29
RIA 1296991 SA 9-28 RIA Marked Receiver With SA S/N, D.A.L. in rectangle, Block P in 4 quarter circles.
Butt plate is checkered; oiler/thong case inside butt trap, which has the long groove for the
spare parts case. Metal all black Parkerized. M1907 sling is without markings. (email 2/08)
RIA 1297099 SA 1-42 RIA Marked Receiver With SA S/N
SA 1297xxx AV 2-19
SA 1299168 SA 5-28*
SA 1299391 HS 2-44* USMC Service Rifle w/ Original Barrel (what?)
SA 1303223 SA 12-28 gg stock w/ boxed SA (email 1/07)
Here are the pics of my rifle. I will post more once I get them resized.
https://www.milsurps.com/images/impo...0/rirsdd-1.jpg
https://www.milsurps.com/images/impo...0/9zpv2w-1.jpg
https://www.milsurps.com/images/impo.../2r3l66x-1.jpg
https://www.milsurps.com/images/impo.../2cwqvc7-1.jpg
https://www.milsurps.com/images/impo.../2q0rq05-1.jpg
https://www.milsurps.com/images/impo...0/f4qm9c-1.jpg
https://www.milsurps.com/images/impo.../2moyvpd-1.jpg
RED33wspc
Here are a few more.
https://www.milsurps.com/images/impo.../2cqifco-1.jpg
https://www.milsurps.com/images/impo.../2wc4c3m-1.jpg
https://www.milsurps.com/images/impo...0/xqet90-1.jpg
https://www.milsurps.com/images/impo.../20q1fue-1.jpg
https://www.milsurps.com/images/impo.../2m28c1x-1.jpg
RED33wspc
That is a great looking rifle red! thanks for posting up the pics.
I am really wondering what the heck the SA #'s are
anyone want to trade me a unertl for a leo 4.5 to 14 x50? preferably a 16 or 20 power.
The type B international match rifle has the SA stamp under the barrel and they are calling it the star gauge #. but the #'s on red's rifle(SA504), mine(SA507), and the type b(SA512) are different than what is described as star gauge #'s on p.209 of Brophy's book
So red and I have spare parts from international comp. rifles or someone changed them? am I on the right track here? Thanks for everyone's help on this forum, very interesting and useful information due to all your work.
SA 597 is likely a steel lot code, if you post a good close up picture of the receiver edge of the receiver face, were the barrel meets the receiver, ill be able to tell if its an NRA sporter.
everson-if you can nail 3 glowsticks in a row at 200 yards that is one heck of a rifle for a pig-in a-poke,lol just think what it could do wearing a unertl ...l 'll take it off your hands anyday!
