Spingfield 1903...a little help please

Quote:

---

Originally Posted by CarsonLilly

You should be able to click on the picture and they will appear in a larger window.

---

-Thanks but, that doesn't work.


Thanks for the bbl date/ser. no. info.

Quote:

---

Originally Posted by DeputyBill

-Thanks but, that doesn't work.


Thanks for the bbl date/ser. no. info.

---

Image shack has a ton of pop ups and your settings may be on the high side. Try this; RIGHT click on the image, select save "picture as....". That will bring ups some choices, select "DESKTOP", then save at the bottom right. Then, go to your desktop and click on the picture and it will open it and you can zoom it etc.

so what would i need to do to get this gun back to (almost) original form?

Carsonlilly, It's a little hard to see the condition of the rifle in the pictures. However as long as the buttplate area has not been cutofff or otherwise modified all you would really need is a 1903 buttplate and proper screws, a milled 1903 lower band assembly and maybe a sling. This would make the rifle very presentable. Run a patch or 2 with some hoppes thru the bore and then examine it with a light or borelight. The parts are available at most gunshows or thru Ebay, Numrich gun parts Corp, Sarco etc. Get the headspace checked before firing. The stock looks to be a nice finger groove type and if not sanded or otherwise modified is a real joy. The 1903a3 bolt parts could also be replaced with 1903 parts. Nice find!!