Sharing my CC Data Sheet

Getting closer? Thanks.

https://www.milsurps.com/images/impo...orrected-2.jpg

Not there yet. Going to fill in some other blanks with n/a, etc.

Slide info was off, it is E169A. I see how this form is one you probably don't get right the first time (or third) :).

Here is what I have so far:
https://www.milsurps.com/images/impo..._deleted-1.jpg

I have Inland #999762, although items like the stock and barrel are known not original, would the Carbine Club be interested in a submission on mine?

Darren: Seems like I remember something about that s/n being a bit unusual. In that case, I bet they would be interested.

HDSledge: Regarding your data sheet, I usually give up when I get about that far on one! I still think you need to make corrections on the mag catch type and the barrel (chamber) skirt. The pictures of yours look identical to the ones on my 400K Inland - and I checked different boxes. I'm not 100% sure I'm correct, though. - Bob

As a suggestion, maybe just put 3/4" for the length measurement at the back of the receiver.

Quote:

---

Originally Posted by USGI

HDSledge: Regarding your data sheet, I usually give up when I get about that far on one! I still think you need to make corrections on the mag catch type and the barrel (chamber) skirt. The pictures of yours look identical to the ones on my 400K Inland - and I checked different boxes. I'm not 100% sure I'm correct, though. - Bob

As a suggestion, maybe just put 3/4" for the length measurement at the back of the receiver.

---

Thanks Bob. You are correct about the mag catch I have the type 3. Not sure how I missed that since it is an easy one. Also will use 3/4" on length from cut to the back.

I attached pics from uscarbinecal30 and one of my chamber since I may be misreading where the skirt ends. I assume it is the short one since it matches the first example pic with the hollow cut a half inch away from the top of the skirt. Is my chamber skirt defined best by A or B?

Thanks again.
https://www.milsurps.com/images/impo...ortskirt-1.jpghttps://www.milsurps.com/images/impo...ongskirt-1.jpg
https://www.milsurps.com/images/impo...irt_type-1.jpg

Long skirt

Also, parkerized is a finish type not a color.

Quote:

---

Originally Posted by BrianQ

Long skirt

Also, parkerized is a finish type not a color.

---

Thanks! What color then?

Quote:

---

Originally Posted by HDSledge

Thanks! What color then?

---

Had my question answered by Ted. Seems it can be very subjective. I think my color for parked is a greenish grey. Not sure exactly how to name the colors but will give it some thought.

Looks like I am getting closer thanks to you guys. <0

Quote:

---

Originally Posted by USGI

slide stop, barrel skirt, slide type, and mag catch. - Bob

---

You nailed every one. Just pulled out the slide stop and it is the top one.

Congratulations. Now put that one in the safe, go buy your next carbine and make out a data sheet on it! :thup: - Bob