This one is with the STG58 100 meters front sand bag only
Printable View
This one is with the STG58 100 meters front sand bag only
Now exploring a Eddystone P14 with TZ sight (PH5B) at 100yds. Bright sunny day, 80degree with a persistent moderate wind blowing into my 7oclock. Zeroed with Kynoch '51 Mk7, second target S&B 180G.
Celebrated the 4th with a day at the range. Adjusted the rear sight and filed down the front on my Chiappa M1-22. I think I have it dialed in now to do the same to the M1a1-22.
Older photo of my 3 .22LR at the range. The scoped 10/22 is undergoing some modifications. The M1-22 is dialed in, and the M1a1-22 is next.
https://www.milsurps.com/images/impo...P_000053-1.jpg
Here is my first entry for this gun 25yards, Class 6.5 (reproduction type Military.22 rifle)
https://www.milsurps.com/images/impo...s_130705-1.jpg
A closer look with info on the group:
https://www.milsurps.com/images/impo...22TgtGfx-1.jpg
OK, Bigduke6, prodded by you and Jmoore, here is my first entry for 2013 in Class 1. An original 1896 Boer Carbine (see Appendix in Ball, 5th Ed.) No.4114.
Looks like this:
Attachment 44664
- Well, almost. The ring add-on to the backsight fell off, and turned out to have been superglued. Not a good idea, since the stuff is quite brittle. And most definitely not from 1896!
Shoots like this:
Attachment 44663
A beautiful little rifle, and a pleasure to shoot.
I do not think that many people shoot a full-bore rifle with rimfire cartridges.
Attachment 44666
But it's worth it!
Is it possible to take part at the shooting? I have the time now and it would be nice to do it.
Ok, will start tomorrow!
Ok, here is my starter. Shot today with my Winchester M1917 in .30-06.
https://www.milsurps.com/images/impo...67bd2346-1.jpg
Had another brief chance to work with the P14 - this time using the std ladder sight. Using HPX Mk7. I found that at 100yds the POI is 9 inches high and 3 inches right - so I went Kentucky - then "pulled" one!
Ill be back after some tweaking - no time this sitting. I have a +0.060" front blade installed - may try a 0.075" to push the muzzle down a touch on the ladder sight - this may afford me the desired couple more clicks depression on the PH5B also.