My black Lady

There are four lengths of L1A1 butt pad - S, M, L and XL.

A number of people sell them, start with a Google search for "L1A1 butt pad"

SAF Lithgow - Products - Furniture

Quote:

---

Originally Posted by Peter Laidler

I understood that these single shot/hand cocking L1A1's had newly made, unported barrels. That can't be the case with this PH made L1A1 barrel, complete with bog standard, presumably ported, gas block. Or is this a genuine, bog standard L1A1? It'll be interesting to see whether the wobbly backsight slide rides up the bed when it's fired

I had a gas-ported, heavier and longer barrel fitted to my genuine hand cocking L85 SA80 rifle and the fact seemed to raise a few eyebrows even though I had a manufacturers non-ported gas block fitted.

---

Peter, It isnt clear if this is a hand cocker, or a standard issue L1A1. I note the owner lives in Slovinia, the Firearm Ownership Laws may well be different there? You see an awfull LOT of AK47's there!......................;)

Quote:

---

Originally Posted by Peter Laidler

I understood that these single shot/hand cocking L1A1's had newly made, unported barrels. That can't be the case with this PH made L1A1 barrel, complete with bog standard, presumably ported, gas block. Or is this a genuine, bog standard L1A1? It'll be interesting to see whether the wobbly backsight slide rides up the bed when it's fired

I had a gas-ported, heavier and longer barrel fitted to my genuine hand cocking L85 SA80 rifle and the fact seemed to raise a few eyebrows even though I had a manufacturers non-ported gas block fitted.

---

Quote:

---

Originally Posted by David TS

Peter

It's not one of ours, looks like a genuine one :madsmile:

I bet you a packet of jelly babies the backsight stays put :D

Do you still have the L85? :move eek:

---

Quote:

---

Originally Posted by tankhunter

Peter, It isnt clear if this is a hand cocker, or a standard issue L1A1. I note the owner lives in Slovinia, the Firearm Ownership Laws may well be different there? You see an awfull LOT of AK47's there!......................;)

---

TH

It isn't one of our straight pulls, it's still got all its gas mechanism :madsmile:

Quote:

---

Originally Posted by David TS

There are four lengths of L1A1 butt pad - S, M, L and XL.

---

I just bought one :D

hand cocker - sorry. my English language skills... What means hand cocker? a kind of straight pull Repeater?
My L1A1 is a genuine semi-auto rifle without any "civil intervention", except CIP Stamps.
Otherwise, semiauto is in Slovenia allowed for sport shooters, prohibited are rifles, there are in active use in SLO Army. Full Auto is allowed for collectors only.
Collector can not go to the shooting range with a full auto, except that he has asked and get a license from "the Officials" for "research purposes trials" .
To buy for collectors only

Ro-bert

Hand cocker - here in the UK civilian self loading rifles are banned in any calibre but .22 LR rimfire.

The L1A1 has to be modified so all the gas recoil/self loading mechanism is inoperative - the barrel is replaced with one with no gas bleed, the gas block is welded up, and the gas tube & piston are removed, and lastly the breech block and carrier are modified.

The cocking handle then is used not only to cock it, but to extract and feed the next round :)

Quote:

---

Originally Posted by David TS

Ro-bert
...the barrel is replaced with one with no gas bleed, the gas block is welded up, and the gas tube & piston are removed, and lastly the breech block and carrier are modified.

---

:crying::crying::crying::crying:

Quote:

---

The cocking handle then is used not only to cock it, but to extract and feed the next round :)

---

Thanks for explanation.

Well... Thanks to Peter (:beerchug:), my rear sight does not wobble anymore, and the Ramp has also proper color;).
I have also reduced the hole size, now i got about 1mm diameter, at good light conditions it should be some improvement noticed:
https://www.milsurps.com/images/impo...ightsjob-1.jpg
Brass is (i think) not optimal material for such application, Aluminum can be deep black anodized, Brass not..
I hope, i can test it in next few days..

What's a Hythe sight worth these days? I have a couple in my parts box.

I got lucky, I paid around £17 for mine a couple of months ago.

There are a couple of people looking for them on FalFiles.com ;)

..... is this usual? :confused:

https://www.milsurps.com/images/impo...etylever-1.jpg