Does anyone know the meaning of the M2 marking on these IP receivers
?
Printable View
Does anyone know the meaning of the M2 marking on these IP receivers
?
Also regarding Charlie's question about SG receiver supply: I've never had an SG, so I can't compare this issue, so if someone knows, does the SG have this 'interruption' or bump up at the rear sight like the IP? I call it an interruption because if you drag a line from front to back, the bump up breaks the line.
Here's a picture of an S'G' posted by Hercules Powder back in May. - Bob
tenOC,Quote:
Originally Posted by tenOC
I have SG 3,465,xxx and S'G' 1,823,xxx that both have this bump you've noted.
I also see that the SG measures 9/16" in length from the rear to the slide cut out, having a C cut notch.
The S'G' measures 1/4", having a squared off/ramped cut. Like the IP's shown in this thread.
BTW,
I just pulled these two from storage..... So they are greasy.
FWIW,
Charlie-painter777
SG 3,465,xxx:
https://www.milsurps.com/images/impo...DSC09130-1.jpg
https://www.milsurps.com/images/impo...DSC09127-1.jpg
S'G' 1,823,xxx:
https://www.milsurps.com/images/impo...DSC09128-1.jpg
https://www.milsurps.com/images/impo...DSC09125-1.jpg
Thanks, guys, but I'm talking about the S.G., like Charlie's. How are others milled? More or less like his?
late entry here
IP all orig serial 32162xx
barrel underwood 3-43
NO import marks never thru a rebuild (still has push safty and rear flip sight) all parts are IP except the S'G' hammer
this one came out of SE asia somewhere about 10-15 years ago