Janossors Hello and introduction
Joined today. Have been interested in firearms of one sort or another as far back as my memory goes about 68 years I guess. I'll be 73 on July the first 2012. Took a hiatus from powder burning at the age of 50 or so and spent about ten years loosing (releasing) arrows with a longbow. My last Bow was a 110 pound checkmate and perhaps the sweetest is a 91 lb Howard Hill big Five. It got pretty intense for awhile (about 18 months) I was loosing 400 arrows a day. I have osteoarthritis in my shoulders and therefore can no longer draw a bow.
At the moment my favourite firearm is a TT 33 in 7.62x25 built in 1943.
have i got what i think i've got?
:yikes:thats me cause i ain't got a scooby doo what i am really doin on here cause all i wanted to know was if what i have got is a cannon ball or not so anywho thats me
New Member/Bren MK 1 Owner
As a new member and recent Bren MK 1M owner, I'm glad I've finally located a site which has the breadth of knowledge the members appear to have.
While I'm happy (giddy) with my recent purchase, I'm somewhat unsure of how to position the gas regulator. I shot several rounds of military ammo (.303) through it using the MK1 barrel without the regulator, truth be told, i had no idea what it was and found the brass had ballooned in the chamber making extraction difficult to damn near impossible.
The next time I shot the gun, I found she performed flawlessly with factory (Remington) ammo and a MKII barrel /regulator borrowed from a friend. Of course, I had repositioned the gas block without realizing there are four distinctly different size holes to regulate gas flow.
My questions are such....which position would "normally" be used for the regulator and would the firing of the gun without the gas block have been the reason for the ballooned cases?
Thanks for reading the intro and the problems I've encountered. While I may be new to this particular gun, she's going to be a valuable addition to my collection.
Bob
HELLO TO ALAL FROM luke418
Luke418 in Plano, Texas; first post.
I noticed that one member was curious about "Stinger" .22 ammo.
FYI (in case no one else has called it) Stinger is a CCI product.
I have some that is at least 14 years old and it performs flawlessly in my Ruger
22/45 MK2.
Thanx, Luke418
hello all, it is good to be apart of your family.
I have two enfield rifles and hope to have three some day . One is a no4 mk1 the other a no1 mk3 I beleave. I hope some of you all can help me found out more about my no1 and what the true year and make it is.
Lithgow Lee Enfield Rifle I suspect is a John Jovino - need help
I need your help in identifying positively if my rifle is a John Jovino Lithgow Lee Engfield or not. My hope is it is not a John Jovino but I suspect it is.
Under the bolt it says Lithgow SHT.LEE III 1915.
Cerial # matches on the nose cap and on the metal up near the bolt action where there is a 5MD, an old 7 pointed star with an A in it and a shield below with ACP in it as well as a second cerial number that matches the cerial number in the wood in the butt stock.
Also on the butt stock is 1915, 5MD, CMF, 18, HV, III and a shield with a kangaroo inside it with the letter A on the left of the kangaroo and C on the right.
On the wood on the underside behind the trigger guard is a 7 pointed star and AUSTRAILIA stamped over it.
On the underneath on the other side of the trigger and the magazine stamped in the wood is Z. You can make out a faint old V two inches further up the wood on the underneath side.
The bolt does not have a matching cereal number. It has the seven pointed star with an A in it as well as MA'41.
The rear site does not have a windgauge screw although the wood shows there was one once. The cereal numbers on the rear site don't match the metal near the bolt or the nose cap or in the wood of the butt stock.
Volley sites are mounted on the gun but the way they are mounted does not look right. For example the forward volley site that looks like a sundial is mounted by a screw instead of being "pinned" in.
The rifle does have brass recoil pads.
The front site has N and an arrow next to it.
The barrell is in very good condition. Here is what is marked on it when I removed the wood. SA with an arrow between them maybe, JJ (one J is higher than the first J), a crown marking that looks to be of India, maybe a I L over 76 over C, maybe a D over a 2 over a C, maybe SA over 2 ?, a square with an O in the center and I L over S A over O maybe.
There are no markings on the Lower Band.
There is an old seven pointed star on the metal behind the front site and the nose guard.
The wood all apears to be original and the same.
I suspect this is a gun by John Jovino. I will try and post some photos if I can figure out how to do it. Great looking Lee Enfield but not sure it is what I hope it to be, a true Lithgow. If anyone has any feedback, please let me know. I hope to hear feedback soon.
New Member and Military Rifle Collector
Hi Everyone,
Just joined and looking forward to those with similar interests.
I am a retired US Army Colonel, both active and reserve.
I am an NRA certified instructor, in both pistol, personal protection and Refuse to be a victim.
My collecting goal was to obtain one example of every major rifle that was ever issued
by the United States Army. Not alternate issues or contract weapons. I have largely
achieved this goal.
I have other questions, but will save for later.
:wave:
Just starting my collection
Made my first purchase in the 80's from my uncle, an unissued 1942 Savage No.4 MK1* in cosomline and paper. My second Enfield came after my fathers passing to start a memorial for him as he served from the beginning to the end with the Royal Canadian Service Corp in WW II... A No. 5 Jungle Carbine (F) 1946. My latest and greatest is a Longbranch No. 7 Canadian Trainer with transit case in pristine condition! Total spent on all three rifles.......$ 950 cdn....$100, $350 and $500 !!!!!! One collector saw all three rifles and said they are museum quality or better.
Hello to all!!!! How is everybody doing tonight?
Hello to all !!!!!!!!!!!!!! How is everybody doing tonight?????????????
Hello from Central New York
Hello all,
As an engineer and historian, I have a recent infatuation with American-made military firearms of the 20th century. I hope to learn from others, and as I learn more, perhaps be able to help those with similar interests.
Regards,
gordon bethune...retired USN and Continental airlines
I served 20 years in the U S Navy, 1958-1978 where I also served in country in Viet Nam. I later retired from Continental Airlines (best airline there ever was).!!!!! I am looking to replace a gun I sold stupidly as a young man ( i know we all did). It's an original Colt 1911 Auto marked U S Navy with matching serial numbers. I've been saving to afford the price for the right gun so, I'm no dealer and I expect to pay the market price for this rare pistol. I will certainly reward any help I receive. I'm asking here because I know this forum is not just another gun market. My email is : gordon@gb1partners.com and my cel is 832 332 4444. Hope I'm not stepping on any toes by making this request for help. There are so many made up, reconditioned and non authentic Navy 1911's that I need help. Please call or email me. I will certainly be thankful for whatever assistance or advice you can give. Thank you, Gordon Bethune
Lee-Enfield #4MkI drawings
Hi Guys,
I'm trying to build a 3-D model [in a CAD program called Solidworks] of the Lee-Enfield #4 MkI - as I used in my days in the Irish Army Reserve [FCÁ] - so I need fully detailed drawings, please.
I have already built a fully-detailed [and fairly accurate] model of my Mauser M96/38 - but this was done by careful measurement of my own rifle - and it's NOT the ideal way to do things! I'd be happy to share this model [or drawings made from it] with anyone from Milsurps who, like me, likes to add things like such as a Rear-Sight Adapter to hold a telescopic sight [without drilling and tapping my beautiful Classic Rifle!]. I use the model of the rifle to ensure a precise fit of newly made parts.
Thanks
Hello Guys, My name is Ed Herring and I own about a dozen Carbines.
Hey Guys. My name is Ed Herring and I own about 12 carbines. Am interested in Inlands, Winchesters, Irwin Pedersens and S'G's.