I have not personally seen an early No4 MKI Longbranch but have been offered oe but the markings look different, Are the markings right? Note: The picture is a little stretch due to resizing.
https://www.milsurps.com/images/imported/deleted.gif
Printable View
I have not personally seen an early No4 MKI Longbranch but have been offered oe but the markings look different, Are the markings right? Note: The picture is a little stretch due to resizing.
https://www.milsurps.com/images/imported/deleted.gif
For comparison and with thanks to Advisory Panel member Lance, you should check the Canada - Milsurp Knowledge Library (click here)
A rare 1941 No.4 Mk1 Long Branch Rifle (click here) .....
Complete with a 150 picture photo montage, this is a fascinating rifle to study its markings and components in detail, with some interesting oddities and variations from the standard No.4 Mk1* noted in the "Collector's Feedback and Comments" section of the main Knowledge Libary entry. There's also information with pictured examples of how to check for a correct front waisted sight protector, versus a home made, or possible fake.
http://photos.imageevent.com/badgerd...20_Medium_.JPG(Click PIC to Enlarge)http://photos.imageevent.com/badgerd...20_Medium_.JPG
Regards,
Badger
Looks fine, if not a little soft. Wonder if it had been refinished?.
There seems to have been four main Long Branch fonts.
The 1941 was different than the 1942 as you can see, and the 1943 was even more different. The 1944 is more like the 1943 than any other.
I'll try to post some others.
The 1941 looks like a pantograph, while the 1942, 44 and 45 are stamps, the 1943 engraving. Something I've been attempting to work on as time allows. Also an interesting line on the reveiver heel stamps and sizes. They were all over the map on those!
Bead blasting and phosphating does tend to round the edges of the earlier pantograph engraved markings - exactly as shown in Enfield Traders photo. Once theyve been through the system a few times, I've seen them beadblasted almost clean
I have a 1943 Long Branch that is virtually un identifiable save the serial number. If you hold it up to the light JUST right, you can make out the receiver markings.... which is one reason I think some, (not all) of the 1943 receiver markings were different than the others; a stamp wouldn't fade to nearly nothing as a engraving does. With '43 being the highest year of production for LB, stands to reason they might want to speed up the line somehow.
Quote:
Originally Posted by Peter Laidler
Here's another interesting 1942 stamp.
https://www.milsurps.com/images/impo...82Medium-1.jpg
PETER, what's the "MP" stamp?
MP=Mounted PoliceQuote:
Originally Posted by Grizz1946
Found on the slightly more than 1000 No4's used by the RCMP.
Quote:
Originally Posted by Grizz1946
The "MP" (Mounted Police) marking is interesting....
There's examples complete with photo pictorials of both 1941 and 1942 Long Branch rifles in the Knowledge Libraries.
Because of that "MP" marking and with thanks to member RNWMP, check out the entry in the Canada - Milsurp Knowledge Library (click here), to see if that helps you.
1942/43/44 RCMP No.4 Mk1* Long Branch Rifles (click here) .....
Regards,
Badger
Mounted Police................ mounted on what? Horses?